Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Taylor
Duct sealing in Taylor, TX typically costs $350 – $850 for most homes, with older downtown bungalows often landing at the higher end due to original gravity-furnace ductwork that needs retrofit sealing. Our crew serves Taylor from our Austin dispatch office, and we’re usually on Porter Street, Murphy Park, or out near the new Samsung plant subdivisions within the same scheduling window we quote. Call (361) 326-5060 for a free estimate, and we’ll give you a written price before any work starts.
We’ve worked on enough Taylor homes to know the split: pre-war bungalows near the courthouse square with ducts that haven’t been touched since the 1960s forced-air retrofit, and brand-new construction where drywall crews crushed flexible runs in the attic before the homeowner ever turned the key. Both need sealing, but the approach is different. That’s why our Duct Sealing team carries mastic and mesh for the old galvanized runs, plus replacement flex duct for the new builds where we find disconnections.
Why Hollis Air Duct Cleaning Is Taylor’s Preferred Duct Sealing Company
Hollis Air Duct Cleaning has been part of the Garrison Partners family since 2004, and our crew has sealed ducts in Taylor’s historic districts and its newest subdivisions alike. We don’t quote one price on the phone and deliver another when the van arrives. The price is written down before we touch anything, and it’s covered by our 365-Day Done Right Promise: if the seal fails within a year, we come back and make it right at no charge, including a free second visit.
Our technicians are background-checked, uniformed, and expected to operate by The Garrison Code: arrive inside the quoted window, price in writing, complete the job by the book, and leave the site clean. Phones are answered by a live person 24 hours a day, seven days a week. No voicemail loops, no callback queues, no waiting until Monday for someone in Taylor to pick up.
We stock professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, plus filtration products from Aprilaire and Guardsman. These are the same tools commercial crews use, not hardware-store gear, and we explain what each one does while we’re working in your home.
Air Duct Sealing in Taylor
Air Duct Sealing in Taylor means closing the gaps, cracks, and disconnected joints in your HVAC ductwork so conditioned air reaches the rooms it’s supposed to reach instead of bleeding into your attic, walls, or crawl space. In a typical Taylor home, we find 20 – 30% air loss through these leaks, which means your system runs longer, your bills climb, and some rooms never get comfortable. A standard sealing job in Taylor runs $350 – $650 for newer homes with accessible ductwork, while downtown bungalows with original gravity-furnace retrofits often run $550 – $850 due to the additional labor of accessing and sealing aging galvanized runs.
Sealing Original Ductwork in Historic Homes
Taylor’s pre-war bungalows near downtown were built with gravity-furnace ductwork later adapted to forced air, so sealing projects here target that original 1930s-era ducting rather than the rectangular sheet-metal systems found in new subdivisions. Those retrofitted runs often terminate in the same wall cavities where mice and roaches nest, making pest debris part of almost every sealing job near the courthouse square. We pull that debris first with agitation tools and negative pressure, then seal with mastic and mesh so the system delivers even pressure to every room.
New-Build Sealing After Construction Damage
New-build homeowners in Taylor’s growth zones often find construction debris in their ducts, but the bigger hidden problem is crushed or disconnected flex duct in the attic. Drywall crews and framers step on these runs during construction, and builders’ hurried timelines leave them undetected until the homeowner feels uneven cooling between rooms. We replace the damaged sections, then seal the full system so the air handler isn’t pulling attic air through gaps.
Duct Sealing Services in Taylor
Duct Sealing Services in Taylor cover everything from spot repairs on a single disconnected run to full-system sealing with aerosolized duct sealant for homes with widespread leakage. Most Taylor homeowners call us after noticing hot spots, cold spots, or utility bills that climbed without explanation. Others schedule sealing after a duct cleaning reveals how much air is being lost to the attic. Our standard service includes pressure testing to measure leakage, manual sealing of accessible joints with mastic and mesh, and replacement of any crushed or disconnected sections we find.
Pressure Testing Before We Seal
We start every job with a duct blaster test or static pressure measurement to quantify exactly how much air your system is losing. In Taylor’s older homes, we regularly see leakage rates of 30% or higher, which means nearly a third of the air you’re paying to cool is going nowhere useful. That number gives us a baseline and gives you a concrete before-and-after comparison.
Mastic Sealing Versus Tape
Foil tape fails. In Taylor’s prolonged cooling season, where systems run nine months a year, cheap tape seals installed at construction dry out and peel within a few summers. We use water-based duct mastic, reinforced with fiberglass mesh on larger gaps, because it flexes with temperature changes and stays bonded for years. It’s slower to apply than tape. It lasts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Taylor
We carry professional-grade equipment and materials from Rotobrush, Nikro, Abatement Technologies, Aprilaire, and Guardsman, and we stock the common fittings and sealants needed for Taylor’s mix of housing ages. That means most jobs don’t wait on parts. For downtown bungalows with odd-sized galvanized fittings, we’ll source what we need and schedule the return visit inside the same week. Our technicians train on the same rotary brush systems and negative-air machines that commercial crews use, so whether we’re sealing a 1930s retrofit on Porter Street or a new subdivision near the Samsung plant, we’re working with tools that match the job.
Common Duct Sealing Problems We See in Taylor Homes
- Gravity-furnace retrofits leaking at every joint. Original ducting in downtown Taylor bungalows was adapted to forced air in the 1960s or 70s, and those joints were never designed for the pressure. Air bleeds into wall cavities where roaches and mice nest, pulling debris into the system and spreading it through the house.
- Crushed flex duct in new construction attics. Builders in Taylor’s growth zones work fast, and flexible duct in attics gets stepped on during drywall and framing. Homeowners move in, crank the AC, and wonder why the back bedroom stays ten degrees warmer. We find the crush, replace the section, and seal the surrounding joints.
- Failed foil tape from summer heat cycles. Taylor’s nine-month cooling season means ducts expand and contract constantly. Foil tape adhesive breaks down, especially in attics that hit 140 degrees. We remove the old tape and apply mastic that stays flexible.
- Disconnected returns pulling attic air. In both old and new Taylor homes, return ducts sometimes separate from the air handler cabinet or from each other at coupling joints. The system pulls hot, dusty attic air instead of conditioned room air, spiking humidity and particle counts indoors.
Pricing for Duct Sealing in Taylor, TX
A typical duct sealing job in Taylor runs $350 – $650 for newer homes with standard accessible ductwork in the attic or crawl space. Downtown bungalows and other historic homes with original gravity-furnace retrofits typically fall in the $550 – $850 range, and full-system aerosolized sealing for large homes or complex layouts can reach $900 – $1,200. What moves the number: how much of the duct we can reach without cutting drywall, whether we need to replace crushed or disconnected sections, and how much debris removal is required before we can seal effectively.
We don’t do per-vent pricing or teaser coupons that balloon once we’re inside. We give one flat price per system, agreed in writing before work starts. That price includes the pressure test, all sealing materials, and any minor section replacements we quoted. If we find something unexpected, we stop and discuss it before proceeding. Call (361) 326-5060 for a free estimate, and we’ll give you a written number you can count on.
We Also Serve Cities Near Taylor
Our crew regularly handles Duct Sealing in Taylor and the surrounding communities, including Hutto, Pflugerville, Round Rock, and Georgetown. Scheduling is coordinated from our Austin office, and we route technicians to keep arrival windows tight no matter which city we’re serving that day.
Serving Taylor, TX - Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Taylor
Your 1930s bungalow was built with gravity-furnace ductwork later adapted to forced air, and those retrofitted runs terminate in wall cavities where mice and roaches have nested for decades. New subdivisions near the Samsung plant use sealed rectangular duct systems installed after modern pest-control standards. We pull the debris with negative-air machines and agitation tools, then seal the runs so pests can’t re-enter. Call (361) 326-5060 for an inspection.
Yes, if the cleaning revealed disconnected joints, gaps, or crushed sections. Cleaning removes debris; sealing prevents it from returning and stops conditioned air from escaping. In Taylor’s older homes, we often find that cleaning alone leaves the underlying leakage untouched, so the debris comes back within a season. We can test pressure before and after cleaning to show you exactly what sealing would save.
We access the original gravity-furnace runs, remove pest debris with rotary brush systems and negative-air machines, then seal joints and gaps with water-based mastic reinforced by fiberglass mesh. In a 1930s home on Porter Street, we recently found a crushed 6-inch run behind the kitchen wall and three sections where duct tape had failed, with pest debris blocking half the return. We cleared it, sealed it, and the back room finally matched the front. Every older home is different, so we inspect before we quote.
Yes. Most Taylor homes lose 20 – 30% of conditioned air to leaks, which means the system runs longer to hit the thermostat setting. Sealing those leaks reduces runtime, and in a nine-month cooling season, that adds up. We measure leakage before and after with a duct blaster test, so you see the improvement in hard numbers, not promises. Call (361) 326-5060 to schedule a pressure test.
The influx of new construction has created two distinct duct sealing markets in Taylor: original bungalows with aging retrofits near downtown, and new subdivisions with flex duct crushed or disconnected during rushed construction. We carry different materials and approaches for each. Growth also means more homeowners moving into homes where the builder never verified duct integrity, so we see a lot of first-year sealing calls in the new zones. Our pricing stays the same whether we’re working on Porter Street or the newest subdivision.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Taylor since 2004 as part of the Garrison Partners family.