Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Pflugerville
Duct sealing in Pflugerville typically runs $450 – $1,200 for a whole-house seal, depending on whether we’re repairing separated flex runs or coating intact joints with mastic. Most jobs take a half day, and we write the price before we touch anything. Call (361) 326-5060 for a free estimate.
We’ve been driving out to Pflugerville since our Austin office opened dispatch to this corridor, and we’ve learned the hard way that sealing ducts here is different from sealing them in Austin’s west hills. The clay soil under neighborhoods like Windermere and Highland Park doesn’t sit still. It swells when it’s wet, shrinks when it’s dry, and slowly tears flexible ductwork apart in the attic while homeowners wonder why the back bedroom never cools. Our Duct Sealing crew carries extra support straps and collar hardware on every Pflugerville truck because we’ve learned to expect foundation-related separation, not just loose tape.
We serve the full spread of Pflugerville housing, from 1980s tract homes off Wells Branch Parkway to newer builds in Falcon Pointe and Blackhawk. Rural properties on unpaved road frontage east of town get special attention: dust loading is heavier, wood heat seasons put more particulate through the system, and detached shop buildings with their own air handlers need inspection intervals that make sense for actual use, not a calendar.
Why Hollis Air Duct Cleaning Is Pflugerville’s Preferred Duct Sealing Company
Hollis Air Duct Cleaning, part of the Garrison Partners family since 2004, operates under The Garrison Standard: arrive inside the quoted window, price in writing, complete the job by the book, leave the site clean. In Pflugerville, that standard means something specific. We’ve seen enough crushed flex runs and heat-cooked sealant to know when a “simple sealing” quote is going to turn into a repair job, and we price for reality, not optimism.
Our technicians are background-checked and uniformed, and our phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues. When you’re trying to figure out why your Falcon Pointe utility bill jumped forty percent in July, you want a human who can put you on the schedule, not a recording.
Every repair we perform in Pflugerville is covered by our 365-Day Done Right Promise in writing. If the work fails within a year, we come back and make it right at no charge, including a free second visit. That’s not a slogan. It’s printed on every invoice.
We coordinate dispatch from our Austin office, but crews serve Pflugerville locally with trucks stocked for the specific failures this market produces: extra mastic rated for 140°F+ attic exposure, collar hardware for reattaching separated flex, and HEPA filtration on exhaust so we don’t leave your attic dirtier than we found it.
HVAC Duct Sealing in Pflugerville
HVAC Duct Sealing in Pflugerville is rarely a standalone service because the Blackland Prairie clay and high water table under this city cause foundations to shift year-round, and that movement separates duct connections in ways that mastic alone cannot fix. When we seal ducts in Windermere or Highland Park, we’re usually reattaching flex runs that have pulled off trunk collars, re-strapping sagged lines, and then coating every joint with duct sealing mastic that stays flexible after it cures. The mastic we use is rated for the 140°F-plus temperatures Pflugerville attics reach in July and August; standard hardware-store tape turns brittle and peels within a season here.
A typical whole-house HVAC duct sealing in Pflugerville runs $450 – $850 if the ductwork is intact and we’re coating joints, sealing register boots, and wrapping takeoffs. When foundation movement has separated runs or crushed flex into the insulation, the job crosses into repair territory and runs $750 – $1,200. We determine which category we’re in with a camera inspection before we write the price.
Attic Heat and Sealant Failure
Pflugerville attics cook. Factory sealant on 1980s – 2000s flex duct wasn’t designed for sustained 140°F exposure, and the outer jacket degrades faster here than in cooler climates. We strip failed tape and old mastic completely before applying new, because coating over peeling material guarantees the leak returns. In newer Falcon Pointe and Blackhawk builds, we check whether the original builder’s sealant has already cooked off; it often has.
Rural Dust Loading and System Pressure
Properties on unpaved roads east of Pflugerville draw fine caliche dust and pollen through every gap in the building envelope. That dust packs around duct takeoffs and hides cracked collars until a camera finds them. Sealing without cleaning first just traps the debris against the joint, and the seal fails faster. We agitate with a Rotobrush rotary system under negative pressure before we seal, so the mastic bonds to duct metal, not to dust.
Duct Repair in Pflugerville
Duct Repair in Pflugerville is what we write on more than half our quotes because clay-soil slab movement pulls flex duct off trunk collars and register boots, and the leak is structural before it’s a sealant problem. In Windermere, we regularly find 1980s single-story homes where the primary bedroom flex run has detached completely and collapsed into attic insulation; the homeowner feels “low airflow” but doesn’t know the duct isn’t connected at all. Reattaching that run, adding support straps to prevent re-separation, and then mastic-sealing every joint is standard here. Austin’s limestone west side rarely produces this failure signature.
Duct repair in Pflugerville typically costs $650 – $1,400 depending on how many runs are damaged, whether we need to replace crushed flex, and whether the plenum itself has separated from the air handler. We always inspect with a camera before quoting, and we show you the footage so you understand what we’re pricing.
Foundation Movement and Re-Support
Mastic alone re-cracks within a season if the underlying duct run is hanging free or pulling against a shifting collar. We re-strap with metal strap and drive additional supports into framing so the duct isn’t tensioned by its own weight. In Highland Park homes from the 1990s, we often find the original plastic strap has snapped from heat cycling; we replace with metal and add a support every four feet minimum.
Freeze-Thaw and Sealant Cracking
Winter Storm Uri proved that Pflugerville isn’t immune to hard freezes, and the freeze-thaw cycle cracks old duct sealants that were already heat-damaged. We remove compromised material entirely rather than patching over it. The mastic we apply remains flexible to 20°F below, so the next cold snap doesn’t reopen the joint.
Trusted Brands We Service in Pflugerville
We stock parts and filtration products from Aprilaire, Abatement Technologies, and Guardsman for Pflugerville jobs, which means most repairs don’t wait on a parts run to Austin. Our equipment roster includes Rotobrush rotary brush systems for agitation cleaning before sealing, and Nikro negative-air machines that keep debris contained during the job. When we’re sealing ducts in a Blackhawk home with a Honeywell media air cleaner or an Aprilaire whole-house dehumidifier tied into the return, we understand how the sealed ductwork interacts with that equipment. The static pressure relationship matters. A duct system sealed too tight for the original blower spec can starve the air handler; we measure before and after with a manometer so we don’t create a new problem solving the old one.
Common Duct Sealing Problems We See in Pflugerville Homes
- Clay-soil slab movement separates flex from collars. In Windermere and Highland Park, we find supply runs pulled completely off trunk lines because the foundation shift transmitted stress through framing into the attic. The leak isn’t at the joint; the joint doesn’t exist anymore. We reattach, re-support, then seal.
- Attic heat cooks factory sealant on 1980s – 2000s flex duct. Pflugerville attics reach 140°F-plus for months each summer. The adhesive backing on original flex duct tape turns to powder, and mastic skins over but doesn’t bond. We strip to bare metal and start fresh.
- Unpaved-road dust packs takeoffs and hides cracked collars. Rural properties near Pflugerville draw fine dust through soffit vents and gaps around roof penetrations. That dust accumulates at duct takeoffs, making visual inspection useless until a camera reveals the crack underneath. We clean before we seal, every time.
- Detached shop buildings with independent air handlers get neglected. Outbuilding systems off County Line Road and similar areas often run flex duct across unconditioned space with no insulation upgrade. The temperature swing is more extreme than the main house, sealant fails faster, and the homeowner doesn’t notice because they don’t heat the shop daily. We inspect these systems on the same visit when it makes sense.
Pricing for Duct Sealing in Pflugerville, TX
Whole-house duct sealing in Pflugerville runs $450 – $850 when the ductwork is intact and we’re coating joints, wrapping boots, and sealing plenum connections. When foundation movement or attic heat has damaged flex runs, duct repair plus sealing runs $650 – $1,400 depending on linear feet of replacement, number of reattachments, and whether we need to add support hardware throughout the attic. We do not quote per-vent pricing; that structure invites bait-and-switch. We price per system, in writing, before work starts.
What moves the number: accessibility of the attic, condition of existing ductwork, whether we’re cleaning before sealing (recommended for rural properties), and whether the job requires insulation replacement on damaged runs. Every quote includes camera inspection, written scope, and the 365-Day Done Right Promise. Estimates are free. Call (361) 326-5060 to schedule.
We Also Serve Cities Near Pflugerville
Our crews work throughout the Austin metro corridor, including Pflugerville, Round Rock, Hutto, Manor, and Austin proper. Dispatch is coordinated from our Austin office, but we schedule Pflugerville jobs with local routing to keep arrival windows tight. Whether you’re in a Windermere ranch or a new Falcon Pointe build, the same Garrison Standard applies: written price, written guarantee, background-checked uniformed technician, site left clean.
Serving Pflugerville, TX - Our Local Coverage Area
We’re based in the Pflugerville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Pflugerville
Every 2 – 3 years for properties on unpaved roads, compared to 4 – 5 years for paved-street suburban homes. The caliche dust and pollen load is significantly higher, and it packs into takeoffs and collar gaps that accelerate sealant failure. If you heat with wood, inspect annually; the particulate loading is heavier and the temperature cycling is harder on joints. Call (361) 326-5060 and we’ll put you on an inspection schedule that matches actual use, not a calendar.
Because the sealant was already heat-damaged. Pflugerville attics reach 140°F-plus for months each summer, which makes duct tape adhesive brittle and causes mastic to skin without fully curing. One hard freeze cracks that compromised material. The freeze didn’t cause the failure; it revealed damage that accumulated over three or four summers. We strip old material to bare metal and apply flexible mastic rated for the full temperature swing this climate produces.
Yes, often more so. Shop systems typically run flex duct across unconditioned space with minimal insulation, experience wider temperature swings, and get used intermittently so problems go unnoticed. A detached building off an unpaved road also draws more dust through gaps in the envelope. We can inspect the shop system during the same visit as the main house; the camera inspection will show whether you’re losing conditioned air into the attic or drawing unfiltered air through leaks.
Camera inspection is the only reliable method. If the flex run is still attached to the collar and the damage is limited to failed tape or cracked mastic, sealing alone suffices. If the run has separated, collapsed, or crushed into insulation – common in Pflugerville’s older neighborhoods where foundation movement has stressed the attic framing – you need repair before sealing. We show you the camera footage and explain which category we’re in before we write the price. No guesswork.
No. A proper visit starts with camera inspection and static pressure measurement, then cleaning with brush agitation under negative pressure if the ducts are dirty. We strip all failed sealant to bare metal, reattach any separated runs, add support straps where needed, and then apply duct sealing mastic with a brush or glove to every joint, boot, and takeoff. We finish with a second static pressure reading to confirm the system is balanced and the seal is complete. The mastic cures in 24 – 48 hours; we ask you not to disturb the ducts during that window. Call (361) 326-5060 for an exact quote – estimates are free.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Pflugerville and the greater Austin area since 2004.