Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Solon
Duct sealing in Solon typically runs $450 – $1,200 for a whole-home system, with most jobs completed in a single scheduled visit. If your Solon home was built between 1985 and 2010, there’s a strong chance the original flex-duct joints and trunk takeoffs are leaking conditioned air into your attic or crawl space, not at the registers where you’d notice. Our Duct Sealing team dispatches from our Cleveland office and serves Solon homeowners directly, including neighborhoods from Briar Hill to Signature of Solon and the streets off SOM Center Road. Call (361) 326-5060 for a free estimate with a written price before any work starts.
Why Hollis Air Duct Cleaning Is Solon’s Preferred Duct Sealing Company
We’ve been working in Solon long enough to know the pattern: a homeowner calls after their second summer in a 1990s-built colonial, wondering why the second floor won’t cool and the electric bill keeps climbing. We find the same thing most times, original flex-duct collars at the air handler that were never properly sealed, sometimes sagging, sometimes cracked from Solon’s freeze-thaw cycles. Our technicians are background-checked and uniformed, and every job carries our 365-Day Done Right Promise in writing. If the seal fails within a year, we come back at no charge. Phones are answered by a live person 24 hours a day, 7 days a week, so you’re not waiting through a callback queue when you’ve got a question about your appointment. We price every job in writing before we touch anything, and that number does not move at your door. That’s The Garrison Standard, and it’s how we operate in Solon and every community we serve.
Duct Insulation in Solon
Duct Insulation in Solon addresses a specific weakness in the city’s 1985 – 2010 housing stock: original flex duct running through unconditioned attic spaces where summer heat and winter cold radiate straight through the thin jacket. In Solon’s climate, with July highs pushing 85°F and January lows dropping below 20°F, uninsulated ductwork in your attic can lose 10 – 30% of the thermal energy your HVAC system produces. A typical Duct Insulation job in Solon runs $600 – $1,500 depending on linear footage and accessibility.
When Attic Ducts Need Wrapping
We recommend adding insulation wrap when your ductwork is sound but located in an unconditioned space, common in the two-story colonials off Aurora Road and the contemporary builds near Solon Community Park. The wrap creates a thermal barrier without disturbing existing seals. We use professional-grade materials from Abatement Technologies, not the hardware-store bubble wrap some crews tape on and call done.
Insulation Before or After Sealing
Insulating a leaky duct just traps moisture and mold against the jacket. In Solon’s humid summers, that’s a recipe for musty air all season. We always seal first, then insulate, so the system is tight before we add the thermal layer. The order matters here more than in drier climates.
HVAC Duct Sealing in Solon
HVAC Duct Sealing in Solon targets the pressurized leaks that waste money and create uneven temperatures, especially at the hidden joints between trunk lines and flex-duct takeoffs that builders in the 1990s and 2000s often left unsecured. A typical whole-home HVAC Duct Sealing job in Solon costs $450 – $1,200, with partial-system repairs starting around $300. We use mastic and fiberglass mesh on accessible joints, and where appropriate, aerosolized sealant for leaks inside finished walls.
Pressure Testing After the Seal
Every HVAC Duct Sealing job we complete includes a post-seal pressure test so you see the before-and-after numbers. In Solon, we commonly find systems leaking 25 – 40% of conditioned air before we start. After sealing, we expect that below 10% on accessible systems. You get the printout.
Source Removal Comes First
Sealing a dirty system traps debris. In Solon’s wooded lots, especially Briar Hill and the neighborhoods near the Cuyahoga Valley, pollen and leaf mold accumulate in returns all spring. We clean under negative pressure with Nikro equipment before we seal, so the system stays clean after we’re gone.
Trusted Brands We Service in Solon
We stock parts and filtration products from Honeywell, Aprilaire, and Abatement Technologies for Solon homeowners, which means faster turnaround when your system needs a component replacement alongside sealing work. Our rotary brush systems from Rotobrush and negative-air machines from Nikro are the same equipment commercial crews use in hospitals and schools, not consumer-grade tools. If your Solon home has an Aprilaire media filter or Honeywell electronic air cleaner, we can integrate the sealing work with your existing filtration setup so the whole system performs as designed.
Common Duct Sealing Problems We See in Solon Homes
- Original flex-duct collars cracking at the air handler. In Solon’s 1990s and 2000s builds, the flex duct was often secured with zip ties or minimal tape that dries out within a few seasons. The collar separates, and conditioned air dumps into your basement or utility closet instead of reaching the registers.
- Builder-grade filters letting construction debris past the blower. Drywall dust from original construction and later renovations coats the blower motor and housing, reducing airflow so severely that sealed ducts can’t deliver proper volume. We see this in nearly every Solon home that still runs the original 1-inch fiberglass filter.
- Sagging flex duct in long attic runs. Solon’s large homes, especially the 4-5 bedroom colonials in Signature of Solon, often have 20-plus foot flex-duct spans that sag between supports. The sag creates a low point where condensation pools in summer, and the weight pulls joints apart over time.
- Return ducts pulling unfiltered air from wall cavities. In homes near Solon’s heavy tree canopy, return leaks suck in pollen, mold spores, and even insect debris from inside walls. Sealing the return side without cleaning it first just circulates that load faster.
Pricing for Duct Sealing in Solon, OH
A typical whole-home duct sealing job in Solon runs $450 – $1,200. Partial-system repairs focused on accessible attic or basement ductwork start around $300. Full-system sealing with pre-cleaning, mastic application at all accessible joints, and post-seal pressure testing falls in the $800 – $1,200 range for most Solon homes. What moves the number: linear footage of ductwork, accessibility (finished basement ceilings add time), whether we need to clean before sealing, and if insulation wrap is added after. We give you one flat price per system, agreed in writing, before any work starts. No per-vent pricing, no add-ons at the door. Estimates are free. Call (361) 326-5060 to schedule.
We Also Serve Cities Near Solon
Our crews work throughout the eastern Cleveland suburbs, including Duct Sealing in Solon and surrounding communities. We also serve Bedford, Maple Heights, Beachwood, and Brecksville with the same written pricing, background-checked technicians, and 365-Day Done Right Promise.
Serving Solon, OH - Our Local Coverage Area
We’re based in the Solon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Solon
Yes, probably. Most Solon homes from that era have original flex-duct joints that were never properly sealed at construction, and 20 years of thermal cycling has cracked the tape or mastic that was applied. We regularly find 25 – 40% air leakage in 2000s Solon homes on first inspection. Call (361) 326-5060 for a free estimate.
The builder should have pressure-tested the duct system, sealed every joint with mastic and mesh, installed at least a MERV 8 pleated filter, and run the system during construction to capture drywall dust before you moved in. Most didn’t. That’s why we see construction debris in blower housings and unsealed collars throughout Solon’s 1990s – 2000s neighborhoods. We can correct both issues now.
The AC unit is fine; the ductwork is leaking. In Solon’s two-story colonials, the longest flex-duct runs serve the second floor, and those are the joints most likely to separate at the trunk takeoff. We were called to a 2003-built colonial off Signature Drive where the second-floor bedrooms ran five degrees warmer than the first; a camera inspection showed the original flex-duct collar at the air handler had never been sealed, and a Honeywell Aprilaire filter was pulling unfiltered return air straight past it. After source removal under negative pressure and sealing every accessible joint with mastic and mesh, the supply and return ducts held pressure and the upstairs rooms finally matched the thermostat.
It does. Solon’s heavy tree cover, especially near the Cuyahoga Valley and in older neighborhoods like Briar Hill, produces more pollen, leaf mold, and organic debris than open suburbs. That material enters through return leaks and gaps around the air handler, coating the system and accelerating filter clogging. Sealing without cleaning traps that debris inside; we always clean first in Solon.
You get a post-seal pressure test showing leakage percentage before and after, photos of the sealed joints if accessible, and our 365-Day Done Right Promise in writing. If the system fails to hold pressure or any seal opens within a year, we return and make it right at no charge, including a free second visit. No negotiation, no runaround. Call (361) 326-5060 if you want to review what documentation you’ll receive.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Solon and the eastern Cleveland suburbs.