Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Staten Island, CA | Hollis Air Duct Cleaning
We clean Trane ducted systems all over Staten Island, from XR air handlers to XV variable-speed furnaces, and we also offer our Air Duct Cleaning in Staten Island for all brands. The difference here isn’t generic dust. It’s the fine, dark, oily particulate that settles into return ducts from the New Jersey refineries and Goethals Bridge truck corridor, mixed with post-Sandy flood silt in South Shore homes. Roy Castellanos and our crew have worked Trane equipment on this island for years, and we treat every Staten Island job as a system diagnosis first, not just a vacuum run. Call (361) 326-5060 for a written, flat price before any work starts.
Why Staten Island Residents Choose Us for Trane Service
While many companies focus on Dryer Vent Cleaning - Staten Island or generic duct work, we specialize in Trane systems. We clean Trane systems every week, and we know the difference between an XR air handler sweating in a damp crawlspace and an XV80 heat exchanger rusting from chronic humidity near Midland Beach. Roy Castellanos came up through the mechanical trades in Los Angeles County and trained on sheet metal and air conditioning at Los Angeles Trade-Technical College. He built Hollis Air Duct Cleaning around one standard: leave a system cleaner than we found it, and explain everything in plain English before we start.
We are an independent Trane service provider. That means we are not authorized, endorsed, or affiliated with Trane. What we bring instead is daily hands-on experience with Trane equipment in Staten Island housing stock, plus OEM Trane parts when a component needs replacement and high-quality aftermarket equivalents for flex duct, mastic, and vent caps where the spec is equal or better. Every job gets a written price before we touch anything, covered by our 365-Day Done Right Promise. If the work fails within a year, we come back at no charge. That’s the whole agreement.
Common Trane Air Duct Cleaning Problems We Solve in Staten Island
- Trane XR and XB air handlers sweating in raised ranches and split-levels. Ducts run through unheated attics and crawlspaces in much of Staten Island’s 1950s to 1990s housing stock. Summer humidity makes these air handlers condense heavily, soaks the insulation, and feeds mold that migrates into return ducts. We clean the full system and treat the coil, not just the visible dust.
- Trane variable-speed blowers (XV series) holding damp particulate longer. Variable-speed blowers run at lower speeds for longer cycles. In Staten Island’s humid subtropical climate, that means biological growth in the return system stays wet and sticky, hardening into a film that ordinary brushing doesn’t remove. Our negative-air and rotary brush setup gets it out.
- Rodent intrusion and torn flex in crawlspaces after nor’easters. South Shore neighborhoods with Trane sheet-metal and flex duct runs see rodents chew through flex and nest in crawlspaces after flood events. Torn flex pulls in outdoor particulate and flood silt that coats the evaporator coil. We replace torn flex and seal duct leaks with mastic.
- Rusted Trane heat exchangers in low-lying shore areas. Homes in Midland Beach and Oakwood Beach sit close to the water table, and chronic dampness rusts heat exchangers in older XV80 and XV95 furnaces. That rust recirculates through supply ducts and lands throughout the house. Heat exchanger cleaning must happen alongside duct cleaning or the problem comes back.
- Oily industrial particulate from the Goethals Bridge corridor. Staten Island sits downwind of New Jersey refinery emissions and constant truck traffic. The fine, dark, oily dust that settles in return ducts doesn’t respond to normal residential cleaning methods. It takes targeted agitation and proper negative-air extraction to remove.
Trane Service in Staten Island: What Local Conditions Mean for Your Equipment
On Staten Island’s South Shore, especially in Oakwood Beach and Midland Beach, we still find original Trane ductwork in homes rebuilt after Hurricane Sandy. The floodwater receded, the walls got new sheetrock, and the ducts were dried out but never replaced. That means flood silt, salt residue, and mold spores are still inside the runs, recirculating every time the furnace cycles. Any Trane owner in a post-Sandy renovation should treat duct cleaning as a potential biohazard job, not a routine appointment. We start with video inspection in these neighborhoods because what’s inside a Sandy-era duct is not what’s inside a duct in Tottenville or Eltingville. The work costs more and takes longer, but ignoring it means breathing whatever the storm left behind.
We were called to a raised ranch in Oakwood Beach with a Trane XV95 furnace and original 1990s sheet-metal ducts running through a damp crawlspace. The homeowner reported musty odors and reduced airflow. Our video inspection found flood silt and mold inside the return trunk and a clogged evaporator coil. We performed full system cleaning including heat exchanger and coil cleaning, applied coil treatment, sealed duct leaks with mastic, and replaced a torn flex run. Airflow came back and the smell went away. That job was not a standard clean. On Staten Island, especially south of Hylan Boulevard, it rarely is.
Trane Models & Products We Service in Staten Island
We service the Trane equipment most common in Staten Island homes: the XR series (XR13, XR14, XR16), the XB series (XB13, XB14), the XV series variable-speed furnaces (XV80, XV95), and ComfortLink and XL series air handlers. For repairs, we use OEM Trane parts when a blower motor, control board, or sensor fails. For commonly sourced items like flex duct, mastic sealant, and vent caps, we use high-quality aftermarket equivalents that meet or exceed OEM specs. For older Trane furnaces with rusted heat exchangers or failing variable-speed components, we’ll give you an honest repair-vs-replace assessment instead of selling a cleaning that won’t fix the underlying problem, unlike some services that push Trane repair in Brooklyn without proper diagnosis. Our trucks are equipped with Rotobrush rotary brush systems, Nikro negative-air machines, and filtration products from Honeywell, Aprilaire, Abatement Technologies, and Guardsman. Everything we use is commercial-grade, not hardware-store gear.
Beyond Trane sales & service, we focus on what Trane equipment actually needs in Staten Island: full system cleaning, evaporator coil cleaning, and heat exchanger cleaning. Those three services address the real failure points in this borough’s climate.
Trane Service Pricing in Staten Island
Trane duct cleaning in Staten Island typically runs between $450 and $900 for a standard single-family home with one furnace, depending on the number of returns, accessibility of the duct runs, and whether the system shows mold, flood silt, or rodent contamination. Homes that went through Sandy and still have original ducts often land at the higher end because the job becomes remediation, not routine cleaning. Coil cleaning and heat exchanger cleaning add cost because they require hands-on work and specialized treatment products. What you get from us is one flat price per system, agreed in writing before any work starts. No per-vent pricing, no price that moves after we arrive. Call (361) 326-5060 for a free estimate and a written quote you can hold us to.
Serving Staten Island, NY - Our Local Coverage Area
We’re based in the Staten Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Staten Island
Yes. We service Trane variable-speed air handlers including the XV series in crawlspaces across Staten Island, similar to our Trane service in Manhattan. These systems run longer at lower speeds, so in damp, humid conditions the return system stays wetter longer and biological growth hardens into a film. We clean the full system, treat the coil, and seal duct leaks with mastic. Call (361) 326-5060 for an exact quote.
Duct cleaning is the starting point, not always the whole fix. Musty odor after flooding usually means mold or flood silt inside the return trunk or around the evaporator coil. We start with video inspection, then clean and treat the affected areas. If the ducts are too far gone, we will tell you honestly and recommend replacement. Call (361) 326-5060 and we’ll walk you through what we find.
Staten Island sits downwind of the New Jersey refineries and the Goethals Bridge truck corridor, which means a fine, dark, oily particulate settles into return ducts and sticks to everything. Normal household dusting doesn’t touch it. It requires targeted agitation with rotary brushes and proper negative-air extraction to remove. That’s part of every Trane duct cleaning we perform on Staten Island.
Yes. Heat exchanger cleaning is one of our core services for older Trane furnaces in Staten Island, especially XV80 and XV95 units in low-lying shore neighborhoods where chronic dampness causes rust. Rust particles recirculate through supply ducts and coat the evaporator coil. We clean the heat exchanger alongside the ducts so the system actually moves clean air. Call (361) 326-5060 for a written quote.
Yes. Torn flex duct in crawlspaces is common in Staten Island after nor’easters and flood events, when rodents chew through and pull in outside air and debris. We replace flex duct with high-quality equivalents that meet or exceed OEM specs, and seal all connections with mastic. It’s part of the full system cleaning we do on Trane equipment. Call (361) 326-5060 for a free estimate.
Service Areas Near Staten Island
We serve all of Staten Island, including Midland Beach, Oakwood Beach, Tottenville, Eltingville, and the neighborhoods between. For Trane owners outside the borough, we also provide Staten Island service area coverage and can direct you to nearby Trane service in Miami or Trane service in Long Beach if needed. If your system is in Brooklyn, Queens, or Manhattan, call us and we’ll point you in the right direction.
Book Your Trane Service in Staten Island Today
Clean ducts, straight answers – that’s the whole job. If your Trane system is breathing wrong, call (361) 326-5060. We’ll give you a written price, show up inside the window, and back the work for a full year. Roy and the Hollis crew are ready when you are.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Staten Island since 2004.