Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Brooklyn, CA | Hollis Air Duct Cleaning
Trane air duct cleaning in Brooklyn typically runs $450 – $900 for a full system on a pre-war walk-up or brownstone, and we complete most jobs in a single visit. What makes our Trane work different here is simple: we know how these systems fail in Brooklyn’s specific housing stock, from coal ash in original ductwork to mold in flooded basement air handlers. We’re an independent Trane service provider, not manufacturer-affiliated, and we’ve been cleaning ducts across Brooklyn since 2004. Call (361) 326-5060 for a written quote before any work starts.
Why Brooklyn Residents Choose Us for Trane Service
We service Trane systems across Brooklyn’s pre-war walk-ups and brownstones every week. That means our technicians know the specific ways Trane air handlers and furnace conversions fail in this housing stock, from undersized returns choking airflow to control boards tripping on high-limit in converted gravity systems. Roy Castellanos, our owner, came up through the sheet metal and air conditioning program at Los Angeles Trade-Technical College and spent years doing hands-on duct work before starting Hollis. He built this company around one standard: leave a system cleaner than we found it, with no upsells and no guesswork. We stock Trane-compatible parts for the cabinets and coils common in Brooklyn homes, and our techs troubleshoot Trane controls and blowers daily. No manufacturer authorization needed to do the work right. For full Trane sales & service details, our brand page covers everything we do.
Common Trane Air Duct Cleaning Problems We Solve in Brooklyn
- High-limit switch tripping in brownstone conversions. Original galvanized steel ducts connect to Trane air handlers with undersized returns in many pre-war buildings. That drives up static pressure, overheats the blower motor, and trips the control board. We clean the duct runs and seal leaks to bring static pressure down.
- Mold and biofilm on Trane evaporator coils in basement air handlers. Brooklyn basements flood during heavy rainstorms, and Trane coil cabinets often have poor condensate drainage. The result is a wet coil that grows mold, which then circulates through the ducts every time the blower runs.
- Salt air corrosion in Coney Island and Sheepshead Bay. Trane condenser fins and blower housings take a beating from coastal salt air. Corrosion reduces airflow and leads to refrigerant leaks. Cleaning the duct side helps, but we also inspect the blower housing and fins for pitting that’s already started.
- Collapsed flex duct runs added during renovations. Tight ceiling voids in older buildings mean flex duct gets crushed or sagged after installation. The duct collars at the Trane cabinet loosen, pulling in dust and debris from the old gravity system. We find and repair these during every full-system cleaning.
- Coal ash and debris buildup in original ductwork. Many Trane systems in pre-war buildings are connected to duct runs that haven’t been cleaned since the 1940s or earlier. The blower wheel gets caked with coal dust, filters clog fast, and airflow drops. HEPA vacuuming and blower wheel cleaning restore the system.
Trane Service in Brooklyn: What Local Conditions Mean for Your Equipment
If you own a Trane system in Brooklyn, the biggest factor working against it isn’t age or brand quality. It’s the building around it. In pre-war walk-ups, Trane air handlers are often installed in basement closets that share walls with original coal chutes. The return ducts pull in residual coal ash from those chutes, and that ash coats the blower wheel and clogs filters far faster than normal household dust ever would. We see this in buildings throughout the borough, but it’s most common in the brownstones of Park Slope and Brooklyn Heights, where gravity furnaces were converted to forced air decades ago and the original octopus ductwork was never properly cleaned. Those ducts often still carry layers of coal dust from the 1920s and 30s, sometimes mixed with deteriorating asbestos tape at the joints. Cleaning a Trane system in that environment isn’t a routine job. It’s a careful excavation with HEPA vacuums and containment, because the last thing you want is to stir up a century of coal ash and push it through the living spaces. That’s a problem you won’t find in newer suburbs, and it’s why we treat every Brooklyn pre-war job as its own project.
Trane Models & Products We Service in Brooklyn
We work on the Trane equipment most common in Brooklyn’s housing stock. That includes XR80 and XR90 gas furnaces found in brownstone conversions, XB and XR series air handlers paired with older ducted systems, XR13 and XR14 air conditioners and heat pumps retrofitted into pre-war buildings, and XV80 and XV95 variable-speed furnaces in post-war brick apartments. For repairs, we use OEM Trane parts for control boards, blower motors, and igniters when they’re available. For common wear items like capacitors and limit switches, we use high-quality aftermarket equivalents that match spec. On older Trane systems with corroded heat exchangers or failing compressors, we give you a straight repair-vs-replace assessment. Sometimes a repair makes sense. Sometimes it doesn’t, and we’ll tell you before you spend another dollar.
Trane Service Pricing in Brooklyn
Trane air duct cleaning in Brooklyn ranges from $450 to $900 for a full system, depending on building size, duct accessibility, and whether we’re cleaning a single air handler or a multi-floor system. Evaporator coil cleaning typically adds $150 – $350, and duct sealing with mastic runs $300 – $800 depending on how many leaks we find. The price is written down before any work starts, and it doesn’t move at the door. Every job includes an inspection of the Trane blower, coil, and accessible duct runs, plus before-and-after photos of your own ducts. Call (361) 326-5060 for a free estimate and an exact number for your building.
Serving Brooklyn, OH - Our Local Coverage Area
We’re based in the Brooklyn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Brooklyn
Usually, yes. High-limit trips on Trane furnaces in Park Slope brownstones most often trace back to restricted airflow from clogged original ductwork or undersized returns connected to the Trane air handler. When the ducts can’t move enough air, the furnace overheats and the control board shuts it down. We clean the duct runs, seal leaks, and inspect the blower wheel. If the high-limit switch itself is worn, we replace it with an OEM Trane part. Call (361) 326-5060 and we’ll diagnose it.
Yes, and we do it regularly in Brooklyn basements that flood during heavy rain. We clean the Trane evaporator coil with a professional-grade coil cleaner, clear the condensate drain, and treat for mold and biofilm. If the coil cabinet has poor drainage, we’ll recommend a fix to prevent recurrence. The goal is a coil that drains properly and doesn’t keep feeding mold into the ducts. Call (361) 326-5060 for an estimate.
A musty smell from Trane equipment in Brooklyn almost always points to mold or biofilm on the evaporator coil or inside the duct runs. Humid summer air condenses on the cold coil, and if the condensate doesn’t drain completely, or if basement flooding saturated the duct insulation, mold takes hold. We clean the coil and ducts, then address the moisture source so the problem doesn’t come back. Call (361) 326-5060 and we’ll find where it’s coming from.
For control boards, blower motors, and igniters, yes, we use OEM Trane parts whenever they’re available. For wear items like capacitors and limit switches, we use high-quality aftermarket equivalents that match the original specifications. We’ll tell you which is which before any part goes in, and the price is on the written estimate.
Duct cleaning won’t reverse corrosion on the condenser, but it does address the airflow side of the problem. Salt air in Coney Island and Trane in Long Beach eats at condenser fins and blower housings, which reduces airflow and puts more strain on the system. We’ll inspect the blower housing for pitting, clean the duct side to maximize available airflow, and tell you honestly whether the condenser needs repair or replacement. Call (361) 326-5060 for an assessment.
Service Areas Near Brooklyn
We serve Brooklyn and the surrounding boroughs. If you’re in Brooklyn service area or nearby, we cover Manhattan, Queens, Philadelphia, and Los Angeles as well. For readers in Texas, see our Trane service in Houston page. In New York, Trane service in Queens covers the neighboring borough.
Book Your Trane Service in Brooklyn Today
We recently cleaned the ducts on a Trane XR80 in a 1920s brownstone off 7th Avenue in Park Slope. The original octopus ductwork was wrapped in asbestos tape, and the blower wheel was caked with coal dust. After HEPA vacuuming, sealing leaks with mastic, and cleaning the evaporator coil, airflow improved and the control board stopped tripping. That’s the job. Clean ducts, straight answers, that’s the whole job. Call (361) 326-5060 for your free estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Brooklyn since 2004.