Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Vista
Duct sealing in Vista typically costs $800 – $2,400 for a whole-home seal, depending on system size and accessibility, with most jobs completed in a single day. We dispatch crews from our San Diego office to serve Vista homeowners directly, carrying mastic, mesh, and professional-grade sealants on every van so we’re not making supply runs while your attic is open. If you live in one of Vista’s older neighborhoods, off East Vista Way or near the original downtown grid, your duct system was likely installed unsealed and has been leaking conditioned air for decades. Call (361) 326-5060 for a free written estimate before any work starts.
Why Hollis Air Duct Cleaning Is Vista’s Preferred Duct Sealing Company
We’ve been in business since 2004 as part of the Garrison Partners family, and our Duct Sealing team knows Vista’s housing stock cold. The 92081, 92083, and 92084 zip codes are packed with mid-century and 1970s tract homes whose original duct systems were never sealed to modern standards. Our technicians are background-checked, uniformed, and trained to The Garrison Code: arrive inside the quoted window, price in writing, complete the job by the book, and leave the site clean. Every repair we perform in Vista is backed by our 365-Day Done Right Promise. If the work fails within a year, we return and make it right at no charge, including a free second visit. Our phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues, no waiting until Monday.
Duct Repair in Vista
Duct Repair in Vista often starts with a homeowner noticing weak airflow at the far end of the house, or a room that never reaches temperature despite the AC running nonstop. In Vista’s older tract homes, we find crushed flex runs behind furnace closets, disconnected trunk lines where original tape has dried out, and rodent damage in attic ducts that has gone unaddressed for years. A typical duct repair in Vista runs $400 – $1,200, depending on whether we’re reconnecting a single run or replacing a damaged section of trunk line.
Crushed and Disconnected Runs
Original flex duct in 1960s and 1970s Vista homes was often routed through tight wall cavities and attic spaces where it gets kinked by storage boxes, compressed by insulation over time, or pulled loose when homeowners change out equipment. We cut back to solid metal, reconnect with proper collars, and seal every joint with mastic and mesh so it stays connected through the next heat cycle.
Rodent Damage and Contamination
Vista’s east-side homes near avocado groves and open fields see far more rodent activity inside attic duct runs than coastal neighbors like Oceanside or Carlsbad. Roof rats and field mice colonize unsealed, uninsulated mid-century duct systems that were never designed with rodent exclusion in mind. That means duct sealing here is as much about closing entry points along the run as it is about stopping air loss. We remove contaminated material under negative pressure with HEPA filtration before any sealing begins.
Air Duct Sealing in Vista
Air Duct Sealing in Vista addresses the conditioned air you’re paying to cool or heat that leaks into your attic, crawlspace, or walls before it ever reaches your rooms. In a typical unsealed Vista home from the 1960s or 1970s, we measure 20 – 35% air loss at the plenum, trunk joints, and register boots. Sealing those leaks with mastic and professional-grade mesh typically runs $800 – $2,400 for a whole system, and the work pays for itself in reduced runtime and more even temperatures room to room.
Mastic Sealing at Joints and Plenums
We brush or trowel water-based mastic onto every joint, seam, and penetration in your duct system. Mastic stays flexible as Vista’s summer heat causes duct board to expand and contract, unlike foil tape that dries and peels within a season. We follow with reinforcing mesh at high-stress points so the seal holds through years of thermal cycling.
Static Pressure Testing After Sealing
Before we close your attic access, we measure static pressure at the blower motor and compare it to manufacturer spec. If the number doesn’t move, we haven’t finished the job. This is how we verify that sealing actually changed something, not just how we claim it did.
Trusted Brands We Service in Vista
Our vans carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, plus filtration products from Honeywell, Aprilaire, and Guardsman. For Vista homeowners, this means we stock the mastic, mesh, collars, and flex duct that match your existing system, so we’re not ordering parts and making you wait. Rotary brush systems from Rotobrush let us clean source contamination before we seal, and Nikro negative-air machines maintain proper containment during the job. When we recommend a filtration upgrade after sealing, we size it to your actual airflow, not a guess.
Common Duct Sealing Problems We See in Vista Homes
- Mastic and foil tape fail at plenum joints where Vista’s summer heat cycling causes original 1970s duct board to expand and contract, reopening seams within a season. We see this constantly in homes near Shadowridge and the Melrose Drive corridor, where attic temperatures spike above 140°F.
- Sealing is done without source removal first, trapping rodent droppings and fine Santa Ana dust inside the run so the contamination keeps circulating regardless of how tight the ducts are. This is why we clean before we seal, every time.
- Uninsulated attic runs in East Vista crawlspaces get chewed open again by roof rats within months because no one addressed the entry points, not just the leak. We inspect for and seal rodent access paths along the duct run, not just the duct itself.
- Disconnected returns pull attic air directly into the system, pressurizing your home with dust, insulation fibers, and whatever else is up there. In Vista’s windy months, this gets worse as pressure differentials increase across the envelope.
Pricing for Duct Sealing in Vista, CA
A typical whole-home duct sealing in Vista runs $800 – $2,400. Single-run repairs or spot sealing at accessible joints start around $400. What moves the number: how much of your system is accessible (crawlspace vs. finished attic), whether we need to remove contamination first, and if we’re also addressing rodent entry points along the run. We give you one flat price per system, agreed in writing before any work starts. No per-vent pricing, no add-ons at the door. Every estimate is free, and we show you before-and-after photos of your own ducts so you know the work was actually done. Call (361) 326-5060 for an exact quote.
We Also Serve Cities Near Vista
Our crews work throughout North County San Diego, including San Marcos, Carlsbad, Oceanside, and Encinitas. Each area has its own housing stock and climate pressures, but the discipline stays the same: written price, written guarantee, job done by the book.
Serving Vista, CA - Our Local Coverage Area
We’re based in the Vista area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Vista
1960s and 1970s Vista tract homes were built with unsealed duct board and flex duct, before energy codes required sealed systems. Decades of thermal cycling, rodent activity, and Santa Ana dust intrusion have degraded what was already minimal sealing. A newer build starts tight; an older Vista home starts with 20 – 35% leakage that has only gotten worse. Call (361) 326-5060 for a free inspection and written estimate.
We run a camera inspection on every Vista job before sealing. You’ll see the footage yourself: droppings, nesting debris, chewed flex, or stains at joints. If we find contamination, we source-remove it under negative pressure with HEPA filtration before any mastic goes on. Sealing over rodent debris traps the problem inside. Call (361) 326-5060 to schedule.
Crushed flex duct and disconnected joints can usually be repaired and sealed if the damage is localized. We cut back to sound material, install proper collars, and seal with mastic and mesh. If a trunk line is collapsed or rodent-chewed through multiple feet, replacement is the honest recommendation. Either way, you get a written price before we start. Call (361) 326-5060 for an exact assessment.
After sealing, we typically recommend a MERV 11 filter for Vista’s dust and pollen load, sized to your system’s actual airflow. A sealed duct system can handle the slightly higher resistance because it’s not also fighting 30% leakage. We verify static pressure after any filter upgrade to confirm the blower isn’t overworking. Call (361) 326-5060 and we’ll check your current setup.
We recommend a visual inspection every 3 – 5 years in Vista, sooner if you notice uneven temperatures or rising energy bills. Santa Ana winds, summer heat cycling, and rodent pressure are ongoing factors here. Our 365-Day Done Right Promise covers any sealing failure within the first year at no charge. Call (361) 326-5060 to schedule a recheck or address any concern.
Ready to stop paying to cool your attic? Call (361) 326-5060 for a free written estimate on duct sealing in Vista. We’ll inspect your system, show you what we find, and give you one flat price before any work starts. Every job is backed by our 365-Day Done Right Promise.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Vista since 2004.




Before
After
Before
After
Before
After