Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Riverview
Duct sealing in Riverview typically runs $400 – $950 for a whole-home system, and most jobs are scheduled within a few business days. We’re the Riverview crew from Hollis Air Duct Cleaning, and we know the ductwork in this city better than most because we’ve spent years inside the same subdivisions you’re living in. Our scheduling runs through the Miami office, but our technicians live and work Hillsborough County, which means we’re not driving down from Tampa or across from Orlando to reach a home in Panther Trace or Summerfield. When you call (361) 326-5060, a live person answers, and we’ll give you a written price before any work starts.
Why Hollis Air Duct Cleaning Is Riverview’s Preferred Duct Sealing Company
We’ve been in business since 2004 as part of the Garrison Partners family, and that track record matters in a city where half the HVAC companies operating today didn’t exist five years ago. Riverview homeowners aren’t looking for the cheapest quote; they’re looking for the quote that doesn’t change once the van is in the driveway. Our 365-Day Done Right Promise covers every duct sealing job in writing. If the seal fails or the leak returns within a year, we come back and make it right at no charge, including a free second visit. Our technicians are background-checked and uniformed, and they arrive inside the quoted window. That’s The Garrison Standard, and it’s how we operate in every Riverview home we enter.
HVAC Duct Sealing in Riverview
HVAC Duct Sealing in Riverview is usually a different job than it is in older Florida cities, because most of the housing stock here was built after 2000. We’re not retrofitting 1970s galvanized metal trunks. We’re sealing first-owner builder-grade flex duct in concrete-block homes where the original install is showing its age after five to fifteen years of near-constant AC run time. The typical HVAC duct sealing job in Riverview runs $400 – $700 for partial system work and $700 – $950 for a full home seal, depending on how many runs need attention and whether we need to remove construction debris first.
Our process starts with a camera inspection of the return plenum and accessible trunk lines. We use the Nikro negative-air machine to maintain suction during the seal, which keeps debris from circulating into your living space while we work. The seal itself is applied with duct mastic, a thick compound that fills gaps and joints more reliably than tape alone, especially in Riverview’s humidity where adhesive-backed products degrade faster than they would inland.
Sealing Around Construction Debris
In Riverview’s newer subdivisions, we regularly find drywall dust and builder debris caked inside the return plenum. Sealing over that material is pointless. We source-remove it first, then seal the plenum seams so the joint actually holds.
Flex Run Support and Sag Repair
Builder-grade flex duct in Riverview homes is often strapped too far apart. The sag creates low spots where condensation pools. We re-support the run, drain or dry the line, and seal the joint that pulled apart.
Duct Repair in Riverview
Duct Repair in Riverview often starts with a homeowner complaint that sounds like an equipment problem: one room won’t cool, the AC runs constantly, or the electric bill jumped. The cause is frequently a separated flex run, a crushed duct behind drywall, or a return plenum that was never fully sealed at construction. Duct repair in Riverview typically costs $250 – $550 for isolated run replacement or joint repair, and $550 – $950 when we’re replacing multiple unsupported spans or addressing moisture damage inside the duct. We price it in writing before we cut or seal anything.
Our crew carries replacement flex duct, proper support straps, and mastic rated for the temperature swings your system sees. We don’t use hardware-store foil tape as a permanent repair. In Riverview’s climate, that tape curls off in a season.
Moisture-Damaged Section Replacement
When condensation has sat in a sagging low spot long enough, the flex duct liner delaminates. Sealing over moldy material traps the problem inside. We cut out the damaged span, install new duct, and seal to the remaining system.
Return Plenum Rebuilds
The plenum where your return air enters the air handler is a common failure point in Riverview’s newer homes. Builders sometimes leave gaps at the cabinet junction. We rebuild and seal that connection so unconditioned attic air stops leaking in.
Trusted Brands We Service in Riverview
Our Duct Sealing crews work with professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, and we stock filtration and sealing products from Honeywell and Aprilaire for Riverview customers who want to upgrade while we’re already in the system. These aren’t hardware-store tools. The Nikro negative-air machines we run create the suction that keeps your home clean while we seal. The Honeywell and Aprilaire media filters we can install after a seal job are the same units specified for commercial buildings in Tampa. Because we carry common sizes and parts, most Riverview jobs don’t wait on a supply run.
Common Duct Sealing Problems We See in Riverview Homes
- Builder-grade flex duct sagging between widely spaced straps. The low spots trap condensation in Riverview’s year-round humidity, and the sealed seam eventually pulls apart. We see this in Summerfield and Panther Trace homes built in the 2010s more often than you’d expect.
- Drywall dust and construction debris left in the return plenum at handover. This clogs the seal joint before it ever cures. Common in Riverview’s 2000s – 2020s subdivisions, and something older cities rarely see at this scale.
- Sealing over a wet, moldy flex run instead of source-removing first. Near-tropical AC run time means sealing moisture in just feeds mildew inside the duct. We dry or replace before we seal.
- Homeowners sealing registers or air handler cabinet gaps with hardware-store tape. That tape is rated nowhere near the duct’s temperature swing. In Riverview’s attic heat, it fails in months.
Pricing for Duct Sealing in Riverview, FL
A typical partial HVAC duct sealing in Riverview runs $400 – $700. A full-system seal, including return plenum work and multiple flex run repairs, runs $700 – $950. Duct repair for isolated issues like a separated run or failed joint typically falls between $250 – $550. What moves the price: how many runs need attention, whether we need to remove construction debris before sealing, and if any sections require replacement rather than sealant alone. We do not quote per-vent prices. We quote one flat price per system, agreed in writing before any work starts. The estimate is free. Call (361) 326-5060 and we’ll schedule a look.
We Also Serve Cities Near Riverview
Our crews work throughout Hillsborough County and into neighboring communities. If you’re in Seffner, Gibsonton, Apollo Beach, or Brandon and seeing the same flex duct issues, we cover your area too. Scheduling is coordinated from our South Florida office, with local technicians dispatched to each job.
Serving Riverview, FL - Our Local Coverage Area
We’re based in the Riverview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Riverview
Builder-grade flex duct in Riverview’s newer subdivisions is often installed with minimal support and left containing construction debris. The seal joints weren’t designed to handle fifteen years of near-constant AC run time in this humidity. We see 2019 homes with separated runs regularly. Call (361) 326-5060 for a free inspection.
Yes. The near-tropical humidity means condensation forms inside ductwork year-round, which degrades tape adhesives and causes mastic to cure differently than it would in drier climates. We use products and application methods selected for Florida’s conditions. Call (361) 326-5060 to discuss what your system needs.
Duct cleaning removes debris from inside the duct. Duct sealing closes gaps and joints where conditioned air leaks out or unconditioned attic air leaks in. In Riverview, we often do both because construction debris prevents a proper seal. Call (361) 326-5060 and we’ll assess whether you need one or both.
We pressurize the system and use a calibrated flow hood to measure air loss at the air handler, then inspect accessible runs with a camera. In Riverview’s concrete-block homes with shallow-pitched roofs, we can usually reach most of the ductwork through attic access points. Call (361) 326-5060 to schedule a pressure test.
Sealing stops attic air, dust, and insulation particles from entering your system through gaps. If your Riverview home still has construction debris in the return, sealing alone won’t help until that’s removed. We can assess both. Call (361) 326-5060 for a free estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Riverview and Hillsborough County since 2004.