Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Palm Desert
Duct sealing in Palm Desert typically runs $800 – $2,400 for a whole-home system, and most jobs are completed in a single day with the price written before we start. We’re the Duct Sealing crew for Hollis Air Duct Cleaning, dispatching from our Inland Empire office to serve Palm Desert homes directly. We know the territory: the 1980s ranch builds off Country Club Drive, the snowbird condos in Sun City Palm Desert, the PGA West properties where attic ducts have baked through forty summers. When your registers blow lukewarm air or your energy bill spikes in July, that’s usually failed seals and separated joints in flexible ductwork that was never designed for 110°F-plus attic cycles. Call us at (361) 326-5060 and we’ll put a real price in writing before any work starts.
Why Hollis Air Duct Cleaning Is Palm Desert’s Preferred Duct Sealing Company
We’ve been in business since 2004 as part of the Garrison Partners family, and our Palm Desert customers know what to expect: a uniformed, background-checked technician who arrives inside the quoted window, explains what they find, and prices the job in writing before touching anything. No estimates that balloon once we’re inside. No per-vent gimmicks.
Our 365-Day Done Right Promise covers every duct sealing job in writing. If the seal fails or the leak returns within a year, we come back and make it right at no charge, including a free second visit. That guarantee is backed by the Garrison Standard, not just spoken.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues. When you’re dealing with a Palm Desert home that’s hitting 85°F in the front rooms while the AC runs nonstop, you don’t wait until Monday for answers.
We serve Palm Desert with crews that carry professional-grade equipment from Rotobrush and Nikro, plus sealing and filtration products from Honeywell, Aprilaire, Abatement Technologies, and Guardsman. The same tools commercial crews use, explained in plain terms on every job.
Duct Sealing Services in Palm Desert
Duct Sealing Services in Palm Desert address a specific problem: the flexible ductwork in single-story ranch homes and condominiums has been heat-aged in attics that routinely exceed 110°F, causing factory-sealed joints and inner cores to degrade long before the outer jacket shows any tear. Our crew uses mastic sealant and metal-backed tape to close leaks at plenums, supply and return trunks, and branch connections, then verifies the repair with static pressure testing. A typical whole-home duct sealing in Palm Desert runs $800 – $2,400 depending on system size and accessibility, with most single-story ranches falling in the $1,200 – $1,800 range. We always inspect with a camera first; sealing over crushed or disconnected runs wastes your money and ours.
Leak Detection and Pressure Testing
We pressurize the duct system and measure static loss to find leaks the eye misses. In Palm Desert’s older builds, we regularly see 15 – 25% airflow loss at the plenum alone from heat-cycled sealant failure. The test takes under an hour and gives us a map of what needs sealing versus what needs replacing.

Mastic Sealing of Supply and Return Ducts
Mastic is a water-based sealant we brush onto joints and seams; it remains flexible through temperature swings and won’t dry out like tape alone. For Palm Desert attics, we use mastic rated for high-heat applications, applied to clean metal or properly prepared flexible duct. We never seal over dust-packed collars; that’s a guarantee failure waiting to happen.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Duct Insulation in Palm Desert
Duct Insulation in Palm Desert is often the companion job to sealing, because uninsulated or poorly insulated supply ducts in 110°F-plus attics lose 20 – 30% of their cooling capacity before the air reaches your registers. We wrap sealed ducts with R-8 fiberglass insulation or replace degraded flexible duct with pre-insulated R-8 product. A typical duct insulation job in Palm Desert runs $600 – $1,800 for a whole-home system, with smaller condos and townhomes at the lower end and sprawling ranch homes with long attic runs toward the higher end. The work pays for itself in reduced AC runtime during July and August when your system is already fighting 115°F outside.
Attic Duct Replacement with R-8 Product
When flexible duct has crushed against trusses or the inner core has separated from the outer jacket, sealing alone won’t fix it. We cut out the damaged section and install new R-8 flexible duct with mechanical collars and mastic, then insulate the repair to match the existing system. In PGA West and Sun City Palm Desert, we do this repair several times a month during peak season.
Plenum and Trunk Insulation Upgrades
Metal supply trunks in Palm Desert attics sweat condensation when cool air meets 110°F metal, then rust through. We insulate these with wrapped fiberglass and vapor barrier, sealing the assembly to prevent both energy loss and water damage to ceiling drywall below.
Trusted Brands We Service in Palm Desert
Our vans stock parts and materials from Rotobrush, Nikro, Honeywell, Aprilaire, Abatement Technologies, and Guardsman, so most Palm Desert jobs don’t wait on a parts run. Rotobrush rotary systems handle the agitation and source removal before we seal; Nikro negative-air machines keep dust contained during the process. For filtration upgrades after sealing, we carry Honeywell and Aprilaire media filters and Guardsman UV products. We explain what each piece of equipment does and why we’re using it on your specific system, because a homeowner who understands the work can spot shortcuts from the next outfit.
Common Duct Sealing Problems We See in Palm Desert Homes
- Heat-aged flexible duct in 1980s – 2000s ranch homes. Factory crimp joints and inner cores fail after decades of 110°F-plus attic exposure. The outer jacket looks intact, but the core has separated from the wire helix, creating leaks no tape can fix. We camera-inspect every time.
- Crushed runs against trusses in low-clearance attics. Palm Desert’s single-story ranches often have tight attic spaces where original installers bent flexible duct around framing. Forty years of thermal cycling flattens these sections. Sealing a crushed run is pointless; we replace it with proper routing.
- Monsoon silt packed at boot collars in snowbird condos. After vacant summer months in Sun City Palm Desert and PGA West, fine desert dust settles in disconnected or leaky runs. Crews that skip camera inspection seal the wrong section, leaving the actual leak open to the next Santa Ana event.
- Plenum seal failure from continuous AC operation. Palm Desert systems run 10 – 12 months a year. The constant pressure cycling at the air handler plenum eventually breaks mastic and tape bonds. We remove old sealant, clean the joint, and reseal with high-temp mastic rated for this workload.
Pricing for Duct Sealing in Palm Desert, CA
A typical whole-home duct sealing in Palm Desert runs $800 – $2,400. Small condos and townhomes with accessible attic hatches usually land at $800 – $1,200. Single-story ranch homes in Sun City Palm Desert or off Country Club Drive, with 1,200 – 2,500 square feet and moderate attic access, typically fall at $1,200 – $1,800. Larger custom homes in PGA West with long attic runs, multiple zones, or buried ductwork can reach $2,000 – $2,400. Duct insulation adds $600 – $1,800 depending on linear feet.
What moves the price: accessibility (crawlspace versus walk-in attic), system size (number of supply and return branches), condition of existing duct (sealing only versus replacement of crushed sections), and whether we perform source removal first per NADCA standards. We never quote per-vent pricing; that’s a bait-and-switch setup. You get one flat price per system, agreed in writing, before we start. Estimates are free. Call (361) 326-5060 to schedule.
We Also Serve Cities Near Palm Desert
Our crews cover the full Coachella Valley, including Indian Wells, Thousand Palms, Rancho Mirage, and La Quinta. Dispatch and scheduling are coordinated from our Inland Empire office, with local technicians serving each community. Whether you’re in a La Quinta hillside home or a Rancho Mirage country club property, the same Garrison Standard applies: written price, written guarantee, background-checked uniformed crew.
Serving Palm Desert, CA - Our Local Coverage Area
We’re based in the Palm Desert area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Palm Desert
Because Palm Desert’s extreme summer heat keeps HVAC systems running nearly year-round while attic temps soar above 110°F, flexible duct runs in single-story ranch homes bake until factory-sealed joints and inner cores degrade, so the leaks our crew finds are usually heat-driven, not rodent-driven. A system that runs 3,000+ hours annually in 110°F attics ages roughly twice as fast as the same equipment in a milder climate. Call (361) 326-5060 for a camera inspection and written estimate.
Yes. After vacant summer months, monsoon silt settles in crushed or disconnected runs and reads as a leak at the bypass; crews seal the wrong section when they skip camera inspection. We always inspect first, then remove source contamination per NADCA standards before applying sealant. Call (361) 326-5060 to schedule pre-season service before you return in the fall.
We camera-inspect and pressure-test every system; separated inner cores, crushed runs against trusses, or duct with degraded wire helix get replaced, while intact flexible duct with failed collar seals gets resealed with mastic. In a 1980s single-story ranch in PGA West, we found the original flexible duct had separated at two collars and was crushed against a truss after 40 years of 110°F-plus attic cycles. We rebuilt those runs with R-8 ducting, sealed the plenum and supply and return ducts with mastic, and verified the air handler was holding static pressure. The front rooms dropped nearly 10°F at the register within days. Call (361) 326-5060 for an inspection.
Sealing reduces dust infiltration by closing leaks in the return side that pull unfiltered attic air into the system, but it must be paired with proper filtration and source removal to address dust already inside the ducts. Skipping NADCA standards during source removal leaves fine desert dust and sand packed at the boot collars; new sealant bridges over it and peels off during the next Santa Ana wind event. We do both steps, in order. Call (361) 326-5060 for a complete assessment.
Sealing alone won’t eliminate musty odors from stagnant, humid air in a sealed system; we typically combine sealing with source removal and sometimes UV treatment to address the biological growth causing the smell. After a summer of monsoon-driven dust storms and months of vacancy, snowbird homeowners returning in October often find their ducts packed with a layer of fine desert silt and a distinct musty odor from stagnant, humid air in the sealed system. We clean first, seal second, and verify with before-and-after photos so you know the work was done. Call (361) 326-5060 for a free estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Palm Desert since 2004.




Before
After
Before
After
Before
After