Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Murphy
Most Murphy homeowners with dust that won’t quit, rooms that never cool evenly, or utility bills that spike every July are dealing with leaky ductwork, not a failing AC unit. Duct sealing in Murphy typically runs $400 – $1,200 for a whole-home seal depending on accessibility and damage, and our Duct Sealing crews can usually assess and quote the job in a single visit. We dispatch from our Dallas-Fort Worth office and serve Murphy neighborhoods like Rolling Ridge, Murphy Farms, and the older ranch pockets along FM 544 with the same schedule we keep for our own backyards. Call (361) 326-5060 and a live person will pick up, day or night.
Why Hollis Air Duct Cleaning Is Murphy’s Preferred Duct Sealing Company
We’ve been in business since 2004 as part of the Garrison Partners family, and our Murphy customers know the difference between a crew that tapes a register and calls it sealed versus one that crawls the attic, finds the real breach, and fixes it by the book. Our technicians are background-checked and uniformed; you know who’s arriving before they knock. Every job gets a written price before we touch anything, and every seal is backed by our 365-Day Done Right Promise – if the work fails within a year, we come back and make it right at no charge, including a free second visit. Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues. That’s The Garrison Standard.
Duct Repair in Murphy
Duct Repair in Murphy is often the step homeowners skip, jumping straight to sealing when the real problem is a crushed, disconnected, or torn run that tape alone cannot fix. In Murphy’s 1990s – 2000s subdivisions, builder-grade flex duct in attic spaces has been baking through twenty-plus summers of 100°F+ heat; the material sags, tears at stress points, and crimps where it was poorly supported. We find this constantly in Rolling Ridge and Murphy Farms. Repair means replacing damaged sections with proper flex or hard duct, re-supporting runs so they don’t re-crush, and only then sealing the joints. A typical duct repair in Murphy runs $300 – $800 per damaged run or section, with whole-system repairs ranging $800 – $2,000 depending on attic accessibility and how much original material needs replacing.
Crushed Flex Runs and Sagging Lines
Flex duct is cheap to install and terrible to age. In Murphy attics, we’ve pulled down runs that had sagged into a U-shape, collecting condensation and debris, or been crushed by a storage board laid across them years ago. We cut out the damaged section, install new flex or switch to galvanized hard pipe in high-heat zones, and support it with proper straps every four feet so it stays open and pitched for drainage.
Disconnected Returns and Supply Joints
A disconnected return joint in a Murphy attic doesn’t just leak air – it pulls attic air straight into your system. That means pollen, insulation fibers, and whatever rodents left behind. We find these in Murphy Farms especially, where original tape has dried and failed. We reconnect with mechanical fasteners, then seal with mastic, not tape alone.
Air Duct Sealing in Murphy
Air Duct Sealing in Murphy is the finish work that makes a repair last, and it’s often what’s missing in homes where the ducts were “cleaned” but never properly sealed. Sealing means applying mastic or aerosol sealant to every joint, seam, and penetration so conditioned air reaches the rooms it was meant for instead of pressurizing your attic or crawl space. In Murphy’s master-planned communities, original sealing was often minimal – tape that degrades, gaps at plenum connections, registers that leak behind the drywall. A typical whole-home air duct sealing in Murphy runs $400 – $1,200 for accessible attic systems, with more complex jobs in tight crawl spaces or with extensive repair needs reaching $1,500 – $2,500.
Aerosol Duct Sealing vs. Manual Mastic
For Murphy homes with extensive leakage throughout the system, we sometimes recommend aerosol sealing, which pressurizes the ductwork and seals leaks from the inside with a non-toxic polymer. It’s faster and reaches gaps you’d never find by hand. For targeted repairs with accessible joints, manual mastic application gives us visual confirmation of every seal. We price both approaches in writing before we start.
Static Pressure Testing After Seal
Sealing without testing is guessing. After we seal, we measure static pressure at the air handler to confirm the blower motor isn’t fighting restricted airflow. In Murphy’s older 1970s ranch homes along FM 544, this step is critical – undersized trunks can read as “sealed” while still creating pressure problems that stir dust through the house.
Trusted Brands We Service in Murphy
We carry filtration and sealing products from Honeywell, Aprilaire, and Abatement Technologies – the same equipment commercial crews use, not hardware-store tape and caulk. For Murphy homeowners, that means we can source replacement components and filtration upgrades without waiting on regional distributors. Our Nikro negative-air machines and HEPA filtration run on every job where we’re disturbing debris in your ductwork. If your system needs a media filter upgrade after sealing, we stock Aprilaire and Honeywell units that drop into standard return plenums. Fast turnaround, no chasing parts.
Common Duct Sealing Problems We See in Murphy Homes
- Builder-grade flex duct in Rolling Ridge attics sags and tears after repeated 100°F+ summers, so sealing tape alone fails without repairing the crushed runs first. We replace the damaged flex, support it properly, then seal.
- In Murphy Farms, disconnected return joints pull attic air – and its pollen and insulation fibers – straight into the supply and return ducts, undoing any sealing at the registers. We reconnect mechanically and seal with mastic.
- Older 1970s ranch homes on FM 544 have undersized trunks for modern AC units, so sealing attempts without addressing static pressure just redirect dust into the living space. We test pressure and resize where needed.
- Spring pollen from Murphy’s oak, cedar, and pecan trees infiltrates through every gap, meaning leaky ducts distribute allergens room-to-room instead of filtering them. Sealing stops the infiltration at the duct wall.
Pricing for Duct Sealing in Murphy, TX
Whole-home duct sealing in Murphy typically runs $400 – $1,200 for standard attic-accessible systems with moderate leakage. Jobs requiring extensive repair of crushed or torn flex, aerosol sealing for hard-to-reach leaks, or work in tight crawl spaces range $1,500 – $2,500. Single-run repairs with sealing start around $300 – $800. What moves the price: attic accessibility, how much original flex needs replacing, whether we’re sealing after a cleaning, and if static pressure testing reveals undersized trunks that need addressing. We give one flat price per system, agreed in writing before any work starts. No per-vent pricing. No invoice that balloons once the van is in your driveway. Estimates are free. Call (361) 326-5060.
We Also Serve Cities Near Murphy
Our Duct Sealing in Murphy crews are based from the Dallas-Fort Worth metro office and also handle jobs in Houston, San Antonio, Dallas, and Fort Worth. Same equipment, same written pricing, same 365-Day Done Right Promise in every city we serve.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Murphy
Because builder-grade flex duct and minimal sealing tape degrade faster than the houses themselves, especially in Murphy attics that hit 140°F+ in summer. We’ve found original tape turned to powder in Rolling Ridge homes barely twenty years old. Call (361) 326-5060 for a free inspection.
Murphy’s heavy oak, cedar, and pecan pollen infiltrates through every duct gap and gets distributed by the blower, so sealing is as much an allergen-control measure as an efficiency fix. We see homeowners who sealed their windows but never thought about the ducts pulling attic air. Call (361) 326-5060 to stop the infiltration.
These homes were ducted for 1970s HVAC tonnage, so when a modern AC unit is later installed, the original undersized supply and return ducts drive static pressure up and stir dust instead of filtering it – a problem you rarely see in the 1990s – 2000s master-planned subdivisions. Sealing without resizing the trunk can make pressure worse. Call (361) 326-5060 and we’ll test before we quote.
Yes – our source removal and sealing protocols align with NADCA guidelines for containment, negative-pressure HEPA filtration, and post-job verification. Our Nikro negative-air machines and Abatement Technologies HEPA systems are spec’d for commercial work, and we apply the same standard to Murphy homes. Call (361) 326-5060 for specifics on your system.
Sealing stops new dust and pollen from entering, but it doesn’t remove what’s already coating your ducts. If you’re seeing dust at registers or uneven airflow, we typically recommend source removal cleaning first, then sealing to keep it clean. We price both in writing so you can decide. Call (361) 326-5060 for a free estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Murphy since 2004.




Before
After
Before
After
Before
After