Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Mill Creek East
Mill Creek East homeowners don’t need to chase us down. Our scheduling runs out of the Seattle office, and crews are in your area regularly. Call (361) 326-5060 and you’ll reach a live person who knows the difference between a home off 35th Avenue SE and one down by the North Creek trailhead. We show up inside the window we gave you, price the job in writing before we touch anything, and seal your ducts by the book under The Garrison Standard.
Why Hollis Air Duct Cleaning Is Mill Creek East’s Preferred Duct Sealing Company
We’ve been working in Mill Creek East long enough to know the pattern: a homeowner buys a 1989 or 1994 tract home, the inspection says the HVAC is “functional,” and two seasons later they’re smelling something stale at the registers. That’s not a coincidence. It’s the builder-grade flex duct and the unsealed boots we find in nearly every home of that era.
Our technicians are background-checked, uniformed, and accountable. The price we write down before work starts is the price you pay. No per-vent add-ons, no “we found another problem” once the ladder is in your attic. And every duct sealing job carries our 365-Day Done Right Promise in writing. If the seal fails or the smell returns within a year, we come back and make it right at no charge, including a free second visit.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues.
Air Duct Sealing in Mill Creek East
Air Duct Sealing in Mill Creek East is a different job than it is in older, leakier housing stock. Most homes here were built in the 1980s and 1990s with tight, energy-efficient ductwork that barely leaks. The problem isn’t massive air loss. It’s small joint and boot gaps that pull construction dust, attic debris, and cedar pollen into a system whose tightness already traps fine particles at the low points of builder-grade flex runs. Typical Air Duct Sealing in Mill Creek East runs $350 – $650 for a whole-system seal on a standard two-story home, with larger homes or hard-to-access attic runs toward the upper end.
Source Removal Before Sealing
We don’t seal over debris. Our crews use Rotobrush rotary brush systems and Nikro negative-air machines with HEPA filtration to pull out the dust mat first. Sealing a dirty duct just traps the problem. In Mill Creek East’s tightly built homes, that trapped debris recirculates faster because there’s less leakage to dilute it.
Mastic Sealing at Joints and Boots
We seal with mastic, not tape. Mastic stays flexible, handles the temperature swings in your attic, and closes the gaps where flex duct meets the boot or where the boot meets the subfloor. Those are the exact spots we find drawing attic air in Mill Creek East homes.
Duct Sealing Services in Mill Creek East
Duct Sealing Services in Mill Creek East cover the full scope: inspection with camera, source removal of existing debris, sealing of all accessible joints and boots with mastic, and post-seal verification. A homeowner needs this when they notice uneven heating between floors, dust blowing from registers, or that chalky, musty smell that hits when the system cycles on. Duct Sealing Services in Mill Creek East typically run $350 – $650 for a complete system, depending on access and whether we need to pull sagging flex duct back into position before sealing.
Flex Duct Resupport and Seal
Builder-grade flex duct in Mill Creek East attics often sags into loops that trap dust and strain the connections. We resupport the line, remove the debris at the low point, then seal the joints. The duct lasts longer and moves air the way it was designed to.
Return Duct Sealing in Unconditioned Space
Many Mill Creek East homes run return ductwork through the attic. When the boot isn’t sealed to the subfloor, every cycle pulls attic air through that gap. We seal it at the source so your system breathes indoor air, not attic air.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mill Creek East
Our crews carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies. We stock Guardsman filtration products and sealants for Mill Creek East jobs, so we’re not waiting on parts while your attic is open. That means faster turnaround and a crew that finishes in one visit. The tools are the same ones commercial crews use on larger buildings; we just bring them to your two-story tract home off 132nd Street SE or down by the Mill Creek Town Center.
Common Duct Sealing Problems We See in Mill Creek East Homes
- Construction dust still cycling from the 1980s or 1990s handover. The original builders sealed the ducts well enough for energy code, but they didn’t always clean out drywall debris first. Small boot gaps have been pulling that dust into your air ever since.
- Sagging flex duct at low points in the attic. The original builder-grade material loses tension over decades, drops into a loop, and collects debris. The sag also strains the joint, making it harder to seal until we resupport the line.
- Unsealed boots drawing attic air and pollen. Mill Creek East’s heavy tree canopy, especially around the North Creek watershed, drives serious spring and fall pollen loads. An unsealed boot at the second-floor register pulls that load straight into your supply ducts.
- Rainy-season moisture on duct insulation. The damp Pacific Northwest winters can lead to condensation in poorly insulated attic ducts, or actual drips from small roof leaks. Sealing over damp or moldy surfaces without cleaning first traps the problem behind the seal.
Pricing for Duct Sealing in Mill Creek East, WA
Whole-system duct sealing in Mill Creek East runs $350 – $650 for most two-story homes and townhomes built in the 1980s – 1990s. Larger homes with longer duct runs, or homes where we need to resupport multiple sagging flex sections, can run toward $800. We do not price per vent. We price per system, in writing, before any work starts. The number does not move at the door.
What affects your specific price: how much of the ductwork is accessible in the attic or crawlspace, whether we need to source-remove debris before sealing, and whether flex duct resupport is required. Every estimate is free. Call (361) 326-5060 and we’ll give you a firm range over the phone, then confirm in writing on-site before we begin.
We Also Serve Cities Near Mill Creek East
Hollis crews work throughout the region, including Mill Creek East and nearby Seattle, Spokane, Tacoma, and Vancouver. Scheduling is coordinated from our Seattle office, with local crews dispatched to your area. Whether you’re in Mill Creek East proper or one of these surrounding cities, the same written pricing and 365-Day Done Right Promise apply.
Serving Mill Creek East, WA - Our Local Coverage Area
We’re based in the Mill Creek East area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Mill Creek East
The 1990s construction in Mill Creek East was tight and energy-efficient, but builders often left drywall dust and construction debris in the ducts at handover. Small boot and joint gaps have been pulling attic air and that debris into your system for decades. Duct sealing closes those gaps so you’re not circulating 30-year-old construction dust. Call (361) 326-5060 for a free inspection and written estimate.
Yes. Sagging flex duct creates low points where dust collects and where the joint is strained and prone to leak. We resupport the line, remove the debris, then seal. Sealing without resupporting just puts stress on a joint that’s already failing. Call (361) 326-5060 and we’ll assess whether your sagging sections need attention before we seal.
Mill Creek East’s dense tree canopy, especially the Douglas fir, cedar, and alder around the North Creek watershed, produces a heavy spring and fall pollen load. If your return or supply boots aren’t sealed to the subfloor, every HVAC cycle pulls that pollen into your ducts. Sealing those gaps is source control for your indoor air quality. Call (361) 326-5060 for an exact quote – estimates are free.
Not until we address the moisture. Sealing over damp or moldy duct surfaces traps the problem behind the seal and can make it worse. We inspect with a camera, source-remove any mold or water-damaged debris with HEPA-filtered negative air, let the area dry, then seal. In Mill Creek East’s damp climate, this is more common than homeowners expect. Call (361) 326-5060 for a free assessment.
No. They work together. Duct sealing closes the gaps that pull debris into your system; duct cleaning removes what’s already inside. In Mill Creek East’s tightly built homes, we usually recommend cleaning first, then sealing, so you’re not trapping decades of dust behind a new seal. Call (361) 326-5060 and we’ll recommend the right sequence for your home.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Mill Creek East and the greater Seattle area since 2004.