Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Gallatin
We seal ducts in Gallatin homes every week, from the new subdivisions off GreenLea Boulevard to the older ranches and farmhouses near downtown and along the Cumberland River bottoms. Our crews are scheduled through our Memphis office, but they live and work in this area, so they know the difference between a 2022 builder-grade flex duct system and a 1960s metal trunk-and-branch setup that has been leaking for decades. If your vents are blowing dust, your rooms won’t stay the same temperature, or your energy bills keep climbing, call us at (361) 326-5060. We’ll give you a written price before any work starts, and every seal is covered by our 365-Day Done Right Promise.
Why Hollis Air Duct Cleaning Is Gallatin’s Preferred Duct Sealing Company
Hollis Air Duct Cleaning has been part of the Garrison Partners family since 2004. We operate by The Garrison Standard: arrive inside the quoted window, price in writing, complete the job by the book, and leave the site clean. In Gallatin, that standard matters because the housing stock here is split between two very different problems – new construction with unsealed boots and plenum connections, and older homes with corroded metal seams that have been leaking for half a century.
Our technicians are background-checked and uniformed. You know who is walking into your home before they arrive. The price we write down before any work starts is the price you pay; it does not move at the door. If a repair fails within a year, we return and make it right at no charge, including a free second visit. That is not a slogan. It is written on every job.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues, no waiting until Monday.
Air Duct Sealing in Gallatin
Air Duct Sealing in Gallatin is not the same job from one neighborhood to the next. In the new subdivisions along the GreenLea and Station Camp corridors, we regularly find builder-grade flex duct runs that were never sealed at the plenum or register boots. During the first cooling season, those gaps pull attic air, crawlspace air, and leftover construction debris into the supply ducts. In older downtown Gallatin homes and properties near the Cumberland River bottoms, the problem is usually original metal trunk-and-branch systems with leaking joints, corroded seams, and disconnected takeoffs hidden behind drywall. The sealing approach is different for each.
What the Work Actually Involves
We start with a camera inspection of the full duct run. For new builds, we seal register boots to drywall with mastic, seal plenum connections, and check for construction debris that should have been removed before closing. For older metal systems, we seal joints and seams with mastic or foil-backed tape rated for HVAC use, and we address takeoffs that have pulled loose from the trunk line. We use professional-grade equipment from Rotobrush and Nikro, including negative-air machines with HEPA filtration that keep debris contained while we work.
When Gallatin Homeowners Need This Service
Call us if you notice uneven temperatures room to room, dust that returns quickly after cleaning, musty odors when the system runs, or energy bills that spike during Gallatin’s hot, humid summers. Those symptoms usually mean conditioned air is leaking into attics, crawlspaces, or wall cavities, and unconditioned air is being pulled into the system through gaps that were never sealed.
Duct Sealing Services in Gallatin
Duct Sealing Services in Gallatin cover the full range of residential duct systems found in this market: new flex duct in slab-on-grade construction, older metal trunk-and-branch systems in downtown homes, and hybrid setups where additions have been tied into original runs. Our Duct Sealing team treats each system according to its actual condition, not according to a one-size-fits-all checklist.
New Construction Sealing
Builders in Gallatin’s fast-growing subdivisions often skip sealing register boots and plenum connections, assuming the homeowner will never look inside the ductwork. We find drywall chunks, sawdust, and even discarded drink containers left in flex runs. Our crew removes that debris under negative pressure, then seals every boot and connection with mastic so the system moves only conditioned air, not attic dust.

Older System Restoration
Original metal ducts in Gallatin’s 1950s – 70s housing stock often have joint tape that has dried and peeled, seams that have corroded from decades of humidity, and takeoffs that have separated from the trunk. We seal what can be sealed and flag what needs replacement. No guesswork, no pressure to buy more than the system needs.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gallatin
We carry professional-grade equipment and materials from Rotobrush, Nikro, and Abatement Technologies on every Gallatin job. For filtration and sealing products, we stock Honeywell, Aprilaire, and Guardsman supplies. That means we are not waiting on a parts run from Nashville when your system needs attention. We have the mastic, the foil-backed tape, the HEPA filters, and the negative-air machines on the van when we arrive. For Gallatin homeowners, that translates to one visit, one written price, and work that stays done.
Common Duct Sealing Problems We See in Gallatin Homes
- Unsealed register boots in new construction. Homes in GreenLea and Station Camp subdivisions frequently have register boots that were never sealed to the drywall during construction. The gap behind the vent cover pulls attic air and drywall dust into the living space every time the handler runs.
- Flex duct sagging in slab-on-grade crawlspaces. Gallatin’s humid subtropical climate means crawlspaces stay damp year-round. When flex duct sags between supports, it collects condensation that breeds mold. Sealing over that duct without addressing the sag and the moisture source traps the problem inside.
- Corroded seams in downtown metal systems. Older homes near downtown Gallatin and along the Cumberland River bottoms often have original metal ductwork with seams that have rusted through from decades of high humidity. The leakage is hidden behind walls, so homeowners notice musty odors and high bills before they ever suspect the ducts.
- Construction debris left in new duct runs. We were called to a just-closed home off GreenLea Boulevard after the owners noticed a fine white dust settling on furniture every time the air handler kicked on. Camera inspection showed drywall chunks, sawdust, and a half-empty soda bottle sitting in a flex run, and the register boots had not been sealed to the drywall at all. We pulled the debris under negative pressure with HEPA filtration, sealed the boots and plenum with mastic, and the dust stopped within a day.
Pricing for Duct Sealing in Gallatin, TN
A typical duct sealing job in Gallatin runs $450 – $1,200 for a standard residential system, depending on the duct material, accessibility, and the extent of leakage we find during inspection. New construction sealing with debris removal and boot sealing usually falls in the $550 – $850 range. Older metal systems with multiple corroded seams or hidden takeoff repairs can reach $1,000 – $1,400 if we need to access ducts behind finished walls.
We do not quote per-vent prices or teaser rates that balloon once the technician is inside your home. The price is written down before any work starts, and it does not move at the door. Every estimate is free. Call (361) 326-5060 to schedule an inspection, and we will show you exactly what your system needs with camera footage you can see for yourself.
We Also Serve Cities Near Gallatin
Our crews work throughout Sumner County and the Nashville exurban fringe. We regularly schedule Duct Sealing in Gallatin alongside jobs in Hendersonville, Portland, Mount Juliet, and White House. Scheduling is coordinated from our Memphis office, but the technicians serving your area are local to this market and familiar with the housing stock and climate conditions that affect duct performance here.
Serving Gallatin, TN - Our Local Coverage Area
We’re based in the Gallatin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Gallatin
Builders in Gallatin’s fast-growing subdivisions often skip sealing register boots and plenum connections, and construction debris is frequently left inside duct runs. We recommend a camera inspection before your first full cooling season. Call (361) 326-5060 for an exact quote – estimates are free.
Uneven room temperatures, dust that returns quickly after cleaning, musty odors when the system runs, and energy bills that spike during summer are the most common signs. A camera inspection confirms where the leaks are and how severe. Call (361) 326-5060 for an exact quote – estimates are free.
Yes, but only after we address any sagging or moisture accumulation in the crawlspace. Sealing over wet, sagging flex duct traps mold inside the system. We inspect first, then seal. Call (361) 326-5060 for an exact quote – estimates are free.
The builder should have removed all construction debris from duct runs, sealed every register boot to the drywall with mastic, sealed the plenum connection, and pressure-tested the system for leakage before final walkthrough. Many Gallatin builders skip these steps. We can document what was missed and fix it. Call (361) 326-5060 for an exact quote – estimates are free.
Yes, if the smell is coming from mold or mildew in unconditioned air being pulled through leaking joints and corroded seams. We camera-inspect first to confirm the source, then seal the accessible leaks. If mold is already established inside the ducts, we may recommend cleaning before sealing. Call (361) 326-5060 for an exact quote – estimates are free.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Gallatin and the surrounding Nashville exurban market.




Before
After
Before
After
Before
After