Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Fillmore
We dispatch our Duct Sealing crews to Fillmore from our Los Angeles scheduling office, and we’re familiar with the drive up the 126 through the Santa Clara River Valley. Whether you’re in a 1920s bungalow near Central Avenue or a 1990s tract home off Santa Clara Street, we arrive inside the quoted window with a written price in hand. Fillmore’s wind-driven dust and agricultural grit create a unique strain on duct systems that coastal Ventura County techs rarely see. Call (361) 326-5060 for a free estimate.
Why Hollis Air Duct Cleaning Is Fillmore’s Preferred Duct Sealing Company
We’ve been part of the Garrison Partners family since 2004, and our reputation in Fillmore is built on showing up when we said we would. Homeowners here tell us the same story: they booked a cheap coupon special, the crew arrived late or not at all, and the final bill had nothing to do with the phone quote. We don’t work that way. Our technicians are background-checked and uniformed, and every job starts with a written price that does not move once we’re inside your home.
Our scheduling office answers calls with a live person 24 hours a day, 7 days a week. No voicemail loops. No waiting until Monday for a callback. For Duct Sealing in Fillmore, that matters when you’re staring at a duct leak blowing attic dust into your living room on a Saturday evening.
We know the local housing stock. The post-WWII bungalows near the historic downtown have rigid metal ducts that can be 70 years old. The 1980s and 1990s developments on the east side have flex duct in attics that degrades faster under valley heat. Roy Castellanos and our crew understand both, and we bring the right equipment for each.
Duct Sealing Services in Fillmore
Duct Sealing Services in Fillmore address a problem most homeowners don’t know they have: conditioned air leaking into attics, crawlspaces, and wall cavities before it ever reaches your rooms. In Fillmore’s semi-arid climate, that means your furnace or AC works harder for longer, and the fine dust from unpaved roads and agricultural fields gets pulled into those leaks, coating your blower wheel and evaporator coil. A typical whole-house duct sealing job in Fillmore runs $850 – $1,800, depending on system size, duct accessibility, and whether we need to remove decades of built-up debris first.
Leak Detection and Mastic Sealing
We pressurize your duct system and use a calibrated fan to measure total leakage against the standard of less than 10% of total airflow. Where we find gaps at seams, joints, and register boots, we seal them with duct mastic, a thick water-based sealant that remains flexible for years, reinforced with foil tape at high-stress joints. Mastic outlasts standard tape in Fillmore’s attic heat.
Register Boot and Return Air Sealing
In Fillmore’s slab-foundation homes with attic duct runs, the worst leaks are often at ceiling registers, not at the air handler. The metal boot pulls away from drywall over decades of thermal cycling. We reseat and seal these connections so your return air actually comes from your rooms, not your attic.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Duct Insulation in Fillmore
Duct Insulation in Fillmore solves a different problem than sealing: heat gain in summer and heat loss in winter as conditioned air travels through unconditioned attic or crawlspace. In a valley where summer afternoons routinely hit 95°F and attic temperatures can exceed 140°F, uninsulated ducts bleed cooling capacity before air ever reaches your vents. A typical duct insulation job in Fillmore runs $600 – $1,400 for wrapping existing sealed ducts with formaldehyde-free fiberglass insulation and a vapor barrier.
Attic Duct Wrapping
We wrap sealed metal or flex ducts with R-6 or R-8 insulation, secured with mechanical fasteners and vapor-barrier tape. In Fillmore’s older homes with attic runs, this is often the difference between a system that can’t keep up in August and one that maintains setpoint without running continuously.
Slab and Crawlspace Applications
Some Fillmore homes have under-slab ductwork that we cannot access. Where ducts run through ventilated crawlspaces, we insulate and seal the crawlspace envelope itself, reducing the thermal load on the ducts and cutting condensation risk during winter mornings when valley fog rolls in.
Trusted Brands We Service in Fillmore
Our crews carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, and we stock filtration products from Honeywell, Aprilaire, and Guardsman for Fillmore homeowners who want to protect their newly sealed ducts. We don’t show up with hardware-store gear. A Rotobrush rotary brush system agitates debris from rigid metal duct walls before we seal. Nikro negative-air machines maintain suction so dislodged dust exits your home, not your living room. If your system needs a filter upgrade after sealing, we size and install Aprilaire media cleaners or Honeywell electronic air cleaners to match your airflow requirements.
Common Duct Sealing Problems We See in Fillmore Homes
- Sealing over decades of topsoil buildup. In Fillmore’s older downtown bungalows near unpaved roads, dislodged topsoil settles in rigid metal duct seams. Seal over it and the dust stays trapped, periodically re-entering your air every time the blower cycles. We remove the source first.
- Detached garage and outbuilding duct runs splitting open. Rural properties around Fillmore often share the main HVAC system with workshops or garages connected by duct runs in uninsulated spaces. These lines see the widest temperature swings and split at joints during the first valley heat cycle of summer.
- Ceiling register leaks in slab-foundation homes. With no basement and attic duct runs, the register-to-drywall connection is the weak point. We find 15 – 30% leakage at these boots in pre-1970 Fillmore homes, blowing attic dust directly into bedrooms and living spaces.
- Low-MERV filters letting agricultural grit through. After sealing, some homeowners keep the cheap fiberglass filters. Fine grit from nearby orchards and the Santa Clara River bed passes straight through, coating the evaporator coil and defeating the purpose of the seal. We specify the right filter for your system and local conditions.
Pricing for Duct Sealing in Fillmore, CA
A typical whole-house duct sealing in Fillmore runs $850 – $1,800. Duct insulation adds $600 – $1,400. What moves the number: system size (single-zone versus multi-zone), duct accessibility (attic crawl versus walk-in), whether we need to clean rigid metal ducts first, and if we’re addressing detached structures. We do not quote per-vent or per-linear-foot teaser prices that balloon at the door. We give one flat price per system, agreed in writing, before any work starts. Every estimate is free. Call (361) 326-5060 and we’ll schedule a time that works.
We Also Serve Cities Near Fillmore
Our crews regularly work in Moorpark, Santa Paula, Simi Valley, and Camarillo. Each community has its own housing stock and dust loading profile, but the discipline is the same: written price, background-checked technician, 365-Day Done Right Promise. If you’re on the edge of Fillmore city limits or in an outlying rural property, we cover your area.
Serving Fillmore, CA - Our Local Coverage Area
We’re based in the Fillmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Fillmore
Every 2 – 3 years for homes on unpaved roads with wood heat or outbuilding systems. The combination of topsoil dust, agricultural grit, and longer service drives means ducts load faster than in coastal Ventura County. Sealing without cleaning first traps that debris inside. Call (361) 326-5060 to schedule an inspection and we’ll tell you where your system stands.
Sealing alone won’t fix it if the grit is already inside your ducts. The film comes from fine silt pulled through leaks during Santa Ana wind events, then recirculated by the blower. We clean the source with agitation tools and camera verification, then seal the leaks so new grit can’t enter. After a post-wind cleanup on a 1940s bungalow near the river bottom, our tech pulled ceiling registers and found rigid metal supply and return ducts coated in fine riverbed silt that had made it past the blower motor. We ran agitation tools and a camera inspection, then sealed the leaky seams with mastic and foil tape before adding duct insulation in the attic. The homeowner said the gritty smell that showed up after every wind event was finally gone.
Yes, but only if paired with source removal first. In Fillmore’s older downtown bungalows, sealing is usually only half the job because the decades-old rigid metal ducts themselves act as dust reservoirs – dislodged topsoil from unpaved roads settles in the seams and periodically re-enters the air unless source removal precedes sealing. Because so many of these homes still sit on slab foundations with attic runs, our crew routinely finds the worst leaks at ceiling registers, not at the air handler. Call (361) 326-5060 for a camera inspection and written quote.
They need attention, not necessarily a separate job. Rural Fillmore properties often share the main system with workshops or garages. The duct runs to these spaces sit in uninsulated areas and see the widest temperature swings. We inspect them as part of the whole-system assessment and include them in the flat price if they need sealing or insulation.
MERV 11 – 13 for Fillmore’s dust and agricultural grit load, provided your system can handle the airflow restriction. Lower MERV lets fine grit through to the evaporator coil. Higher MERV without verifying fan capacity can starve the system. We test static pressure and specify the right filter for your equipment and local conditions. Call (361) 326-5060 and we’ll check it during your estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Fillmore and the Santa Clara River Valley since 2004.