Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Corona
We’re the Corona crew that shows up when we said we would, prices the job in writing before we touch a tool, and seals your ducts so the air you paid to condition actually reaches your rooms. Our technicians dispatch from the Inland Empire office and carry mastic, mesh, and professional-grade sealants for every type of system found in Corona homes, from downtown mid-century metal trunk lines to the flex-duct runs in Eagle Glen and Sierra Del Oro. If your registers blow dust after every Santa Ana wind event, or one bedroom never gets comfortable, call us at (361) 326-5060 for a free estimate. We’ll inspect the system with a camera, show you what we find, and give you a written price before any work starts.
Why Hollis Air Duct Cleaning Is Corona’s Preferred Duct Sealing Company
We’ve been doing this since 2004 as part of the Garrison Partners family, and our Duct Sealing team knows Corona’s two housing eras inside out. The older homes near Grand Boulevard were built with rigid metal duct systems that weren’t designed for today’s HVAC loads, while the hillside tracts went up fast during the 1990s-2000s boom with flex duct that sags and pulls loose at the collars. That local knowledge matters because the sealing strategy changes completely depending on which system we’re looking at.
Our technicians are background-checked, uniformed, and held to The Garrison Code: arrive inside the quoted window, price in writing, complete the job by the book, and leave the site clean. Every repair we make in Corona is backed by our 365-Day Done Right Promise, and we also offer Corona Dryer Vent Cleaning services. If the work fails within a year, we come back and make it right at no charge, including a free second visit. Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues.
HVAC Duct Sealing in Corona
HVAC Duct Sealing in Corona is the process of closing gaps, leaks, and disconnected joints in your forced-air system so the air your blower produces actually reaches the rooms it was meant to serve. In this city, the work splits into two distinct challenges: sealing original mid-century metal systems near downtown Grand Boulevard, where rust and open joints bleed conditioned air into wall cavities, and re-securing flex-duct runs in tracts like Eagle Glen and Sierra Del Oro, where sagging and collar separation are the usual culprits. A typical whole-system duct sealing job in Corona runs $850 – $1,800 depending on system size, accessibility, and whether we find disconnected runs that need reconnection before sealing can hold.
Metal System Sealing and Restoration
Original metal trunk lines in Corona’s older homes develop rust pinholes and joint separation after decades of thermal cycling. We clean the surface, apply fiberglass mesh reinforcement, and seal with mastic rated for HVAC use. The fix lasts because we address the rust, not just the leak.
Flex Duct Reconnection and Collar Sealing
Insulated flex duct in Corona’s newer tracts often sags between supports or pulls completely off the collar. Sealing a loose collar is pointless until the run is re-supported and reconnected. We do both, then seal with UL-181 tape and mastic so the joint holds through summer heat and winter wind events.
Duct Repair in Corona
Duct Repair in Corona goes beyond sealing to fix physical damage: crushed runs, rusted-out sections of metal trunk line, and flex duct that has torn or degraded past the point where sealant alone will work. Homeowners near Grand Boulevard often call us after noticing one room stays hot in July or a persistent musty smell that won’t clear with standard duct cleaning. The cause is frequently a disconnected or crushed branch line, or a rusted section of trunk that has collapsed inward and blocked airflow. Duct repair in Corona typically ranges from $400 for a single run reconnection to $2,200 for partial trunk line replacement with proper sealing and balancing. We price it in writing after camera inspection, before any cutting or replacement begins.
Crushed Run Replacement and Rebalancing
We find crushed flex runs in Corona attics where storage items or original inadequate support straps have compressed the duct. We replace the damaged section, install proper supports, and rebalance dampers so the room gets its designed airflow.
Rusted Trunk Line Section Replacement
When rust has eaten through a section of original metal trunk near downtown Corona, we cut out the damaged portion and splice in new galvanized ductwork, sealed and insulated to current standards. The repair restores structural integrity, not just airtightness.
Trusted Brands We Service in Corona
Our Corona crews carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, the same tools commercial HVAC contractors use for schools and medical facilities. We stock sealants, mastics, and mechanical fasteners sized for both original metal systems and modern flex-duct installations, so we’re not ordering parts and making you wait. For filtration upgrades after sealing is complete, we source Honeywell, Aprilaire, and Guardsman products. That means a Corona homeowner gets the repair done in one visit, with materials rated for the job, not hardware-store substitutes that dry out or peel within a season.
Common Duct Sealing Problems We See in Corona Homes
- Santa Ana wind dust infiltration through return leaks. After every wind event, fine desert dust enters Corona homes through gaps in return-air ductwork, especially in older systems near Grand Boulevard. Homeowners often seal the supply registers and ignore the return side, which is where the dust actually enters the system.
- Rusted pinholes in downtown mid-century metal trunks. The original galvanized steel installed before modern flex duct existed has simply reached end of life. We find rust patterns concentrated at joints and low points where condensation collected for decades.
- Sagging flex duct in 1990s-2000s hillside tracts. Eagle Glen and Sierra Del Oro homes were built with insulated flex duct strung too far between supports. Gravity and attic heat have caused the material to sag, kink, and pull loose at collars, making sealing impossible without re-supporting the run first.
- Construction debris still trapped in post-boom ductwork. Technicians working Corona’s hillside tracts regularly pull drywall dust and stucco grit from ducts in homes built during the 1990s-2000s building boom, because those systems were often never cleaned after the original build-out. Sealing over this debris traps it in the system permanently.
Pricing for Duct Sealing in Corona, CA
Duct sealing in Corona runs $850 – $1,800 for a typical whole-system seal, with most single-problem repairs like a disconnected run or isolated joint leak falling in the $400 – $750 range. Duct repair involving section replacement, trunk line splicing, or multiple run reconnections runs $1,200 – $2,200 depending on material length and attic accessibility. What moves the price: system size (square footage and number of zones), whether we need to remove stored items from the attic to access ductwork, and whether the job requires repair before sealing can be effective. We do not quote per-vent teaser prices that balloon once we’re inside. The price is written down before any work starts, and it does not move at the door. Call (361) 326-5060 for a free estimate. We’ll camera-inspect your system, show you the leaks, and give you an exact number.
We Also Serve Cities Near Corona
Our Inland Empire crews also handle Duct Sealing in Corona neighboring communities: Norco, Chino, Chino Hills, and Irvine. Each area gets the same written-price standard and 365-Day Done Right Promise, with scheduling coordinated from our Riverside-San Bernardino office.
Serving Corona, CA - Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Corona
Your return-air ductwork has leaks that pull in fine desert dust during Santa Ana wind episodes, especially if you live near the 91/15 interchange or in south Corona where wind speeds are highest. The dust enters through gaps in the return side, circulates through your air handler, and exits through supply registers. Sealing the return ductwork stops the infiltration at its source. Call (361) 326-5060 and we’ll camera-inspect to locate the entry points.
They require a different approach, not necessarily harder work. Original metal systems need rust remediation and mechanical joint sealing with mastic and mesh, while newer flex duct needs re-supporting and collar reconnection before sealant application. The downtown homes often need more repair before sealing can begin. We’ll tell you which category your system falls into during the free estimate.
We do not seal over debris. Sealing traps existing dust, construction grit, and biological growth inside the system permanently. If your ducts contain significant buildup, we recommend source removal first, then sealing. We’ll show you camera footage and let you decide based on what we find.
Yes, if the comfort problem is caused by duct leakage rather than an undersized HVAC unit. Disconnected runs, crushed flex duct, or open joints divert conditioned air into walls and attics instead of the room. We measure airflow before and after sealing to confirm the fix. Call (361) 326-5060 to schedule a diagnostic.
Hillside tracts like Eagle Glen and Sierra Del Oro use flexible insulated ductwork prone to sagging, kinking, and collar separation, with construction debris often still present from original build-out. Downtown Corona near Grand Boulevard has rigid metal systems with rust, open joints, and decades of thermal stress. The sealing method, materials, and preparatory work are completely different for each. Our technicians carry both skill sets.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Corona and the Inland Empire since 2004.