Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Citrus
Duct sealing in Citrus, CA typically runs $450 – $1,200 for a whole-home job, depending on how much of the original 1950s – 1970s flexible ductwork needs attention. Most Citrus homes we visit need more than just tape at the joints; the flex itself has become brittle after decades of heat cycling in the attic. Call us at (361) 326-5060 for a written estimate before any work starts.
We’ve been driving to Citrus since our Los Angeles office opened scheduling for the San Gabriel Valley. The ranch homes off Citrus Avenue, the split-levels near the 210 corridor, the post-war tract houses south of the freeway; we know the stock. These houses share a common problem: original ductwork that was never designed to last 60 or 70 years. When your registers blow dust right after you’ve cleaned them, or your upstairs rooms never reach temperature, the issue is usually not the HVAC unit. It’s the leaks in the ducts between the unit and your rooms.
Our crews arrive uniformed, background-checked, and inside the quoted window. The price is written down before we touch anything. That’s The Garrison Standard, and it’s how we work in Citrus.
Why Hollis Air Duct Cleaning Is Citrus’s Preferred Duct Sealing Company
We’ve built our reputation in Citrus on showing up and doing what we said we’d do. No estimate that balloons once we’re in the attic. No crew you’ve never met before. The Garrison Code requires our technicians to explain what they found, show you the camera footage if you want to see it, and leave the site clean. In a town where word travels through neighborhood groups and Nextdoor threads, that discipline matters.
Our response time to Citrus is typically next-day or within 48 hours for non-urgent sealing work. We don’t claim same-day dispatch because duct sealing is a scheduled job that requires proper inspection and material prep. Rushing it means missed leaks and callbacks. We’d rather set the right expectation and meet it.
Roy Castellanos, who leads Hollis Air Duct Cleaning, insists that every Citrus job get the same equipment roster we send to commercial sites: Rotobrush rotary systems for agitation, Nikro negative-air machines for containment, and sealing materials rated for the temperature swings these attics see. We don’t use hardware-store tape that dries out in six months.
When we seal ducts in Citrus, we also know to check for the specific failure modes this climate creates. The Santa Ana winds don’t just rattle your patio furniture. They pressurize attic spaces, force fine dust through old return plenums, and can overwhelm seals that were adequate in calmer weather. Local expertise means we seal for the conditions your ducts actually face, not the conditions a manual assumes.
Duct Sealing Services in Citrus
Duct Sealing Services in Citrus address a problem most homeowners don’t know they have: conditioned air escaping into attics, crawl spaces, and wall cavities before it ever reaches your rooms. In a typical Citrus home with original flexible ductwork, we measure 20 – 35% air loss at the trunk-and-branch connections alone. That means you’re heating and cooling your attic, then paying again to condition the air that actually makes it to your bedroom.
Our process starts with a pressure test to quantify the leakage. We then access the duct runs, seal disconnected joints with mastic and fiberglass mesh (tape alone fails on deteriorated flex), and replace crushed or torn sections where the flex itself is beyond saving. The goal is a sealed system that holds its static pressure and doesn’t re-contaminate after cleaning.
Whole-System Pressure Testing
Before we seal anything, we pressurize your duct system and measure the leakage rate in CFM. This gives us a baseline and lets us prove improvement when we’re done. In Citrus homes with original flex, we typically see leakage rates of 300 – 600 CFM on a 3-ton system. After proper sealing, that drops below 100 CFM. The test takes 20 minutes and we show you the numbers.

Mastic Sealing at Trunk and Branch Connections
The connection points between rigid trunk lines and flexible branch ducts are where Citrus homes leak most. Original installations used tape that degrades in attic heat. We remove the old tape, apply water-based mastic with embedded mesh for structural strength, and let it cure before restoring pressure. This joint will outlast the flex itself.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Duct Insulation in Citrus
Duct Insulation in Citrus solves a different problem than sealing, though the two jobs often happen together. Even sealed ducts lose efficiency if the insulation jacket has compressed, torn, or been disturbed by pests. In Citrus’s unconditioned attics, summer temperatures exceed 140°F. A thin or damaged insulation layer means your 55°F conditioned air warms to 70°F before it crosses the attic. You’re paying to cool air that arrives lukewarm.
We inspect insulation R-value and physical condition during every sealing job. Where the original fiberglass wrap has fallen away or been shredded by rodents, we install new insulation rated for the application, secured with proper mechanical fasteners. In some Citrus homes, we also recommend insulating the plenum and trunk lines that were never wrapped originally.
R-Value Assessment and Upgrade
California Title 24 now requires R-8 insulation on new duct installations in climate zones like Citrus’s. Much of the existing stock has R-4 or R-6, and it’s degraded. We measure what you have, explain the heat gain calculation, and quote an upgrade if the payback period makes sense for your usage patterns.
Vapor Barrier Repair
The outer jacket on flexible ductwork includes a vapor barrier that prevents condensation in humid conditions. In Citrus’s dry climate this matters less for mold, but a torn vapor barrier lets attic dust infiltrate the insulation layer and eventually the airstream. We repair or replace compromised sections as part of a complete job.
Trusted Brands We Service in Citrus
We stock sealing and insulation materials from Abatement Technologies and Guardsman, plus we maintain a parts inventory at our Los Angeles dispatch office for fast turnaround on Citrus jobs. When we find a section of flex that needs replacement rather than sealing, we don’t order it and make you wait. We carry the common diameters and connection fittings for the duct profiles used in 1950s – 1970s Citrus construction. The same goes for mastic, mesh tape, and mechanical fasteners. Our Nikro negative-air machines run HEPA filtration during the work, so disturbed attic dust doesn’t migrate into your living space while we’re sealing. Rotobrush agitation tools let us clean the interior of rigid trunk lines before we seal them, ensuring we’re not sealing contamination inside.
Common Duct Sealing Problems We See in Citrus Homes
- Brittle original flex tearing at connections. The 1950s – 1970s flexible ductwork in Citrus homes has exceeded its design life. The inner liner cracks, the wire helix corrodes, and the insulation compresses. Sealing tape won’t adhere to degraded surfaces, so we often need to sleeve or replace sections before we can seal effectively.
- Santa Ana wind infiltration through return vents. During wind events, the pressure differential between attic and living space reverses. Fine dust and ash from fire-prone areas press through old return plenum seals and re-contaminate ducts we’ve just cleaned. We seal the return side as thoroughly as the supply side, which many crews skip.
- Pest intrusion creating hidden gaps. Rodents and insects enter through exterior penetrations and chew or nest in flexible ductwork. The damage is often out of sight behind air handlers or above ceiling panels. Our camera inspection finds these breaches; visual inspection alone misses them.
- Disconnected runs behind air handlers. The vibration of modern high-efficiency blowers works connections loose over decades. We find fully separated ducts blowing conditioned air into attics, with homeowners unaware because the register still moves some air by convection. The fix is reconnection, support, and proper sealing.
Pricing for Duct Sealing in Citrus, CA
A typical duct sealing job in Citrus runs $450 – $1,200 for a whole-home system. Simple jobs with accessible trunk lines and minimal flex replacement fall at the lower end. Homes requiring extensive flex replacement, multiple attic accesses, or remediation of pest damage run higher. We do not quote per-vent pricing; that’s the teaser-rate game that leaves you with a larger invoice at the door.
What moves the price: accessibility (crawl space vs. walk-in attic), linear feet of flex needing replacement, whether we need to install new supports or dampers, and the condition of the return plenum. Every factor is visible during inspection. We write the price down before work starts, and it doesn’t change unless you add scope.
We also offer duct insulation as an add-on during sealing work, typically $200 – $500 depending on the linear footage. Combined sealing and insulation packages in Citrus average $650 – $1,500. Estimates are free, and we bring the camera and pressure test equipment to every quote.
We Also Serve Cities Near Citrus
Our crews travel throughout Southern and Northern California for scheduled duct sealing work. We regularly serve Citrus homeowners and also take appointments in Los Angeles, San Diego, San Jose, and San Francisco. Scheduling is coordinated from our Los Angeles office, with local technicians dispatched to each area.
Serving Citrus, CA - Our Local Coverage Area
We’re based in the Citrus area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Citrus
Your home likely has original flexible ductwork from the 1950s – 1970s that has become brittle and loosely connected, while newer neighborhoods have rigid duct systems with sealed joints designed to last decades longer. The materials themselves are at end-of-life, not just the seals. Call (361) 326-5060 and we’ll inspect with a camera to show you exactly what you’re dealing with.
Santa Ana winds create pressure differentials that force fine dust and ash through old return plenum seals, overwhelming tape repairs and re-contaminating cleaned ducts within weeks. We address this by sealing the return side with mastic and mesh, not just tape, and verifying the seal holds under pressure test. Call (361) 326-5060 to schedule an inspection before the next wind season.
Sometimes, if the flex inner liner is intact and the wire helix isn’t corroded; more often, sections need sleeving or replacement because tape and mastic won’t adhere to degraded surfaces. We never promise a seal on material that’s structurally failed; we’d rather quote the honest fix. Call (361) 326-5060 for a camera inspection and written options.
We pressure-test the system, access the duct runs in attic or crawl space, seal trunk-and-branch connections with mastic and mesh, replace crushed or torn flex sections, and re-test to verify leakage reduction. A typical Citrus job takes 4 – 6 hours. Call (361) 326-5060 for a free estimate with specific pricing for your home.
Signs include rooms that won’t reach temperature, dust collecting at registers right after cleaning, unusually high energy bills, or a pressure test showing leakage above 100 CFM. We offer free estimates that include pressure testing and camera inspection. Call (361) 326-5060 to confirm what you’re seeing.
We were called to a ranch-style home off Citrus Avenue where the homeowner complained of dust coating the registers within days of cleaning. Our camera inspection showed a crushed 6-inch flex run behind the air handler and a disconnected return in the attic. Using Rotobrush agitation tools and negative pressure, we performed source removal, then sealed the trunk and branch connections with mastic and mesh; the static pressure dropped and the dust issue stopped.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Citrus and the San Gabriel Valley since 2004.




Before
After
Before
After
Before
After