Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Brushy Creek
We dispatch our crews to Brushy Creek from our Austin office, and we know the route well enough to hit the quoted arrival window. If you’re in Behrens Ranch, Walsh Ranch, or off FM 620 near the greenbelt, you’re looking at the same scheduling availability as our closer-in jobs. That’s been our standard since Hollis Air Duct Cleaning joined the Garrison Partners family in 2004: arrive when we said we would, price it in writing before we touch anything, and leave the site clean. Call us at (361) 326-5060 for a free estimate on your duct sealing job.
Brushy Creek’s housing stock is specific, and that matters for how we seal ducts here. Most of your neighbors live in 1990s – 2000s slab-on-grade tract homes with flex duct runs baking in unconditioned attics. Those attics hit 140°F+ through five months of continuous AC operation. The greenbelt corridor behind neighborhoods like Behrens Ranch pulls rodents into those same attic runs. We don’t treat Brushy Creek like Cedar Park or Round Rock because the failure modes here are different. Our Duct Sealing team builds the job around what your actual house is dealing with.
Why Hollis Air Duct Cleaning Is Brushy Creek’s Preferred Duct Sealing Company
We’ve been serving the Brushy Creek area long enough that our technicians recognize the neighborhood patterns: the original flex duct in Walsh Ranch built out in the early 2000s, the return-air chases framed into interior walls in the Parmer Lane corridor builds, the homes backing directly onto the Brushy Creek greenbelt trail system where rodent intrusion isn’t an occasional problem but an expected one. That local pattern recognition means we camera-inspect before we quote, and we find the damage other outfits seal over and walk away from.
Our reviews from Brushy Creek customers consistently mention the same things: the technician showed up in a Hollis uniform, explained what the camera showed, wrote the price down before starting, and the final invoice matched that number. No per-vent add-ons. No “we found another problem” once the van was in the driveway. The 365-Day Done Right Promise covers every sealing job in writing: if the seal fails or the leak returns within a year, we come back and make it right at no charge, including a free second visit.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues. Scheduling for Brushy Creek runs through our Austin dispatch office, and we coordinate arrival windows that respect your time.
Duct Insulation in Brushy Creek
Duct Insulation in Brushy Creek addresses a problem most homeowners don’t notice until their summer electric bill spikes: the original R-6 or R-8 flex duct insulation in your attic has compressed, torn, or thermally degraded after fifteen to twenty-five years of 140°F+ heat cycling. When that happens, your cooled air is losing temperature before it ever reaches the register, and your AC runs longer to compensate. A typical duct insulation job in Brushy Creek runs $800 – $1,800 depending on linear footage, accessibility, and whether we’re reinsulating existing intact duct or replacing degraded flex entirely.
When Insulation Beats Sealing Alone
Sometimes the duct is sealed fine but the insulation is shot. We see this in Brushy Creek homes where the flex duct is intact but the outer vapor barrier is brittle and the fiberglass has settled. In those cases, sealing alone wastes your money. We reinsulate with professional-grade materials rated for Central Texas attic conditions, not hardware-store wrap that peels in one season.
Greenbelt Homes and Thermal Loss
Homes backing the Brushy Creek greenbelt often have longer duct runs to reach additions or bonus rooms. More linear footage means more surface area for thermal loss. We measure temperature drop across those runs and show you the numbers before we recommend insulation versus replacement.
HVAC Duct Sealing in Brushy Creek
HVAC Duct Sealing in Brushy Creek is the process of closing leaks in your supply and return ductwork using mastic sealant, metal-backed tape, and mechanical fastening at plenum connections. In this market, a typical whole-house duct sealing job runs $1,200 – $2,400 for a single-story home and $1,800 – $3,200 for two-story layouts with longer attic runs. The price is written down before we start, and it does not move at the door.
Here’s why sealing matters more in Brushy Creek than in looser-built neighboring markets: your slab-on-grade home is sealed tight for AC efficiency, and it sits on some of Central Texas’s highest radon-risk ground. When your return duct leaks in the attic, it depressurizes the house and pulls soil gas through the slab. When your supply leaks, you’re conditioning your attic instead of your living space. Both problems hit harder here because the construction is tighter and the ground is riskier.
Pressure Boundary vs. Duct Boundary
Most homeowners think sealing is about saving money on the electric bill. It does that. But in Brushy Creek’s radon-risk zone, the pressure boundary matters as much as the thermal boundary. We seal return-air chases specifically because an unsealed chase framed into an interior wall is essentially a straw sucking attic air and soil gas into your breathing zone.
Mastic Selection for 140°F Attics
Cheap tape and low-temp mastic fail within a season here. We use Guardsman mastic rated for continuous high-temperature exposure, applied to clean, prepared surfaces. Our techs are trained on The Garrison Code: prep the surface, apply to spec, verify with visual inspection and pressure testing where appropriate. No shortcuts.
Trusted Brands We Service in Brushy Creek
We stock parts and materials from the brands that hold up in Central Texas attics: Rotobrush rotary brush systems for source removal when sealing follows cleaning, Honeywell and Aprilaire filtration products for the HEPA containment we run during the job, and Guardsman mastic for the sealant work itself. We don’t show up hoping the hardware store has what we need. Our vans carry inventory for Brushy Creek’s common duct configurations, which means most jobs finish in one visit without waiting on parts from Austin or Round Rock.
Common Duct Sealing Problems We See in Brushy Creek Homes
- Sealing over rodent-chewed flex duct instead of replacing it. Behrens Ranch and Walsh Ranch homes back onto the greenbelt, and pack rats treat attic duct like nesting material. A mastic patch on a gap a rodent made fails again in one summer. We camera-inspect first, and we replace compromised runs before we seal.
- Unsealed return-air chases pulling attic air into interior walls. Those chases are framed into walls in most Brushy Creek tract builds, and they’re rarely sealed at the top or bottom. With this area’s radon-risk ground and tight slab construction, an unsealed chase pressurizes the house toward soil gas instead of filtered air.
- Failed sealant from 140°F+ thermal cycling. Original installs from the 1990s and 2000s used tape and mastic that wasn’t rated for continuous attic exposure. After five months of nonstop AC, the adhesive degrades and the seal opens. We use high-temp-rated materials and prep surfaces properly.
- Sagging flex duct creating low points that collect condensation and debris. Brushy Creek’s original flex was hung with inadequate support spacing. Over twenty years, the duct sags, the inner liner tears at the stress points, and you’ve got a leak that looks like a seal failure but needs mechanical support plus sealing.
Pricing for Duct Sealing in Brushy Creek, TX
A typical whole-house duct sealing in Brushy Creek runs $1,200 – $2,400 for single-story homes and $1,800 – $3,200 for two-story layouts. Duct insulation jobs range $800 – $1,800. What moves the number: linear footage of duct, attic accessibility, whether we’re sealing accessible plenums or crawling to remote boots, and whether the inspection reveals rodent damage or degraded flex that needs replacement before sealing makes sense.
We don’t quote per-vent pricing. That’s the bait-and-switch model: a low teaser per-vent rate that balloons once the technician is inside and “finds” additional problems. Our price is one flat price per system, agreed in writing before work starts. We show you the camera footage, explain what we found, and write the number down. The invoice matches the written price.
Estimates are free. Call (361) 326-5060 to schedule.
We Also Serve Cities Near Brushy Creek
Our crews run scheduled jobs throughout the region, including Duct Sealing in Brushy Creek and surrounding markets. We also serve Houston, San Antonio, Dallas, and Fort Worth with the same written-price, written-guarantee standard. Each Hollis location operates independently under The Garrison Standard, so your job is dispatched and managed locally, not routed through a distant call center.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Brushy Creek
Homes backing the Brushy Creek greenbelt should have ducts inspected annually and cleaned and sealed every 2 – 3 years. The pollen load from cedar and juniper, combined with rodent activity in attic runs, degrades seals faster than in interior neighborhoods. Call (361) 326-5060 to schedule an inspection.
Brushy Creek’s tight slab-on-grade homes sit on high radon-risk ground, so leaky return ducts create a pressure pathway that pulls soil gas into your living space. Sealing closes that pathway; cleaning alone doesn’t. We address both on every job.
We can seal ducts only after replacing rodent-damaged sections. Sealing over chewed flex duct fails within a season. We camera-inspect, replace compromised runs, then seal with Guardsman mastic rated for 140°F+ attic exposure.
Yes, if you’re conditioning the space. Unsealed duct in a detached shop loses efficiency fast, and the longer runs typical of outbuilding systems have more leak points. We evaluate whether the existing duct is worth sealing or if replacement is the better spend.
We verify with visual inspection of all sealed joints, pressure testing where accessible, and temperature-drop measurement across the system. For Brushy Creek’s radon-risk homes, we also check that return chases are sealed at top and bottom to prevent soil gas pull. You’ll see the before-and-after photos.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Brushy Creek since 2004.




Before
After
Before
After
Before
After