Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Bloomingdale
We’re the crew Hollis Air Duct Cleaning sends to Bloomingdale when homeowners notice their AC running nonstop, rooms that won’t cool evenly, or that faint musty smell every time the blower kicks on. Our dispatch office in Miami coordinates scheduling for Bloomingdale calls, and our techs know the area’s 1980s – 90s subdivisions, the slab-on-grade construction off Lithia Pinecrest and Bell Shoals Road, and what attic heat does to original flex duct. If your ducts are leaking conditioned air into the attic or pulling humid makeup air from wall cavities, sealing is the fix – not another cleaning. Call (361) 326-5060 for a free estimate. We’ll show up in the window we promised, price the work in writing before we touch anything, and stand behind it for a full year.
Why Hollis Air Duct Cleaning Is Bloomingdale’s Preferred Duct Sealing Company
We’ve been serving Florida homeowners since 2004 as part of the Garrison Partners family, and our Bloomingdale customers come back because we write the price down and don’t move it at the door. Our Duct Sealing team is held to The Garrison Code: arrive inside the quoted window, uniformed and background-checked, leave the site clean.
Bloomingdale’s housing stock is specific – mostly 1980s – 2000s tract homes with flexible ductwork in unconditioned attics, and that matters when we’re quoting a seal job. A tech who treats this like any other Tampa suburb will miss the water-table issues. We don’t.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No “we’ll call you back Monday.” When you’re smelling musty air on a Saturday evening, someone picks up.
Every repair is covered by our 365-Day Done Right Promise. If the seal fails or the odor returns within a year, we come back and make it right at no charge, including a free second visit. That’s written on every job, not implied.
HVAC Duct Sealing in Bloomingdale
HVAC Duct Sealing in Bloomingdale is a moisture-control job as much as an air-loss fix, and that’s a distinction you won’t find in drier, higher-ground markets. Most Bloomingdale homes sit on sandy soils with a high water table, and that ground moisture pushes into slab-on-grade construction even in 1990s-era builds. The result: musty odors and pool-style condensation inside flex runs before any visible mold appears. Sealing here must be paired with moisture verification, or the problem returns between cleanings.
Our process starts with a camera inspection of the full duct system. We pressurize the lines and use smoke testing to find leaks at the air handler collar, register boots, and any crushed or disconnected flex runs. Then we seal with mastic – a water-based sealant that remains flexible – and mechanical fasteners at stress points. We don’t use foil tape alone in Bloomingdale attics; the adhesive cooks off in summer heat and humidity.
A typical HVAC duct sealing job in Bloomingdale runs $450 – $850 for a single-system home, depending on accessibility and how many runs need re-support or replacement. Two-story homes with ductwork in a hot garage attic tend toward the higher end. We write the price before we start, and it doesn’t change.
What We Find in Bloomingdale Attics
Mastic and foil-tape seals fail at the air handler collar and register boots in unconditioned attics where summer temperatures and year-round humidity degrade adhesives. We remove the old failing material, clean the surface, and apply new mastic with a reinforcing mesh at joints that flex when the system cycles.
Moisture Verification After Sealing
Because Bloomingdale’s ground-driven moisture can re-enter through slab penetrations and wall cavities, we verify humidity levels at the return plenum and supply registers after sealing. If readings stay elevated, we flag it and explain your options. Sealing alone won’t fix a moisture source.
Duct Repair in Bloomingdale
Duct Repair in Bloomingdale often means fixing what decades of attic heat and humidity have damaged, not just patching a single leak. The 1980s – 90s flex duct in most local homes becomes brittle, collapses where supports have failed, or pulls loose at the air handler when tape adhesive degrades. We’ve also found original ductwork that was undersized from the start – a common issue in rapid-development subdivisions – which strains the blower and exaggerates every leak.
On a 1991 slab-on-grade house off Bell Shoals Road, our tech ran camera inspection down the original flex return and found it crushed flat where an attic truss had settled – the blower motor was pulling makeup air through a closet door gap instead of the return. We performed source removal under negative pressure with HEPA filtration, then sealed and re-supported the return run with new flex and mastic at the air handler collar. Static pressure dropped and the musty odor the homeowners blamed on “the AC” cleared within two days.
Duct repair in Bloomingdale typically runs $350 – $750 for single-run replacement and re-sealing, or $800 – $1,400 if multiple runs are crushed, disconnected, or need upsizing to correct original undersizing. We photograph before and after, and you see the images with the written price before we proceed.
Crushed and Disconnected Flex Runs
Original flex duct in Bloomingdale’s 1980s – 90s homes often sags where straps have failed, gets crushed by storage items in attics, or pulls loose at boots when tape gives way. Sealing visible joints won’t fix a disconnected supply dumping conditioned air into the attic. We locate these with camera and pressure testing, then re-support with proper hangers.
Post-Storm Humidity Damage
After summer storms knock out power, interior humidity spikes while the system is off. If ducts were sealed but not moisture-verified, microbial growth returns and the seal job looks like it failed. We check for this scenario specifically in post-storm service calls.
Trusted Brands We Service in Bloomingdale
We stock parts and sealing materials from Aprilaire, Abatement Technologies, and Guardsman for Bloomingdale jobs, and our equipment roster includes Rotobrush rotary brush systems and Nikro negative-air machines. That means when we find a failed seal or crushed run during your service call, we’re not ordering parts for next week. We carry mastic, reinforcing mesh, flex duct in standard diameters, and register boots for the common sizes in local tract homes. For filtration upgrades after sealing, we source Honeywell and Aprilaire media filters sized to your return. Fast turnaround matters when your AC is running 10 hours a day in July and every day of delay shows up on your FPL bill.
Common Duct Sealing Problems We See in Bloomingdale Homes
- Adhesive failure at air handler collars. The mastic and foil tape applied when your home was built has cooked in attic heat for 30-plus years. It peels, cracks, and lets conditioned air leak into the attic. We scrape to bare metal and reseal with fresh mastic and mechanical fasteners.
- Crushed flex returns in original 1980s – 90s systems. Undersized returns were common in rapid-development subdivisions. Over time, the flex gets pinched by truss settlement or storage weight. The blower starves for air and pulls from wall cavities, garage, or attic instead.
- Ground moisture entering slab-on-grade duct chases. Bloomingdale’s high water table pushes moisture through concrete penetrations. Even sealed ducts develop musty odors if we don’t verify and address humidity at the source. This is why our seal jobs include moisture readings.
- Post-hurricane humidity spikes in unsealed systems. After power outages, humidity soars inside ductwork. If joints were already leaking, microbial growth accelerates. We see peak demand calls 2 – 4 weeks after major storms, and the fix is sealing plus verification, not just cleaning.
Pricing for Duct Sealing in Bloomingdale, FL
Honest pricing means ranges you can use, not a teaser that balloons at the door. In Bloomingdale’s market, a typical duct sealing job runs $450 – $850 for a single-system home with accessible attic ductwork. Two-system homes, ductwork in a hot garage attic, or jobs requiring multiple crushed-run replacements run $900 – $1,600. Duct repair with single-run replacement and re-sealing is $350 – $750; extensive re-routing or upsizing undersized returns runs $800 – $1,400.
What moves the number: how many runs need attention, whether we can access the attic without pulling decking, and if the air handler collar needs full resealing versus spot repair. We don’t quote per-vent or per-register. One flat price per system, agreed in writing, before we start.
Estimates are free. Call (361) 326-5060 and we’ll schedule a tech to inspect, test, and write a price you can hold us to.
We Also Serve Cities Near Bloomingdale
Our crews work across the region, and we regularly schedule Duct Sealing in Bloomingdale alongside calls in Jacksonville, Miami, Tampa, and Orlando. Dispatch is coordinated from our Miami office, with local techs assigned to minimize drive time to your job. Whether you’re in Bloomingdale proper or nearby, the same written price, same 365-Day Done Right Promise, and same uniformed, background-checked crew applies.
Serving Bloomingdale, FL - Our Local Coverage Area
We’re based in the Bloomingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Bloomingdale
The original flex duct and mastic seals in these homes have degraded in attic heat for 30-plus years, so leaks are structural, not just dirty. Cleaning removes accumulation but doesn’t reattach a loose collar or reseal a split boot. Sealing fixes the air loss and moisture intrusion that cleaning leaves untouched. Call (361) 326-5060 for an exact quote – estimates are free.
Yes. Sandy soils and high water table push moisture into slab-on-grade homes regardless of build year. We’ve found musty odors in 2005-era Bloomingdale homes where slab penetrations weren’t properly sealed and ground moisture entered duct chases. Sealing without moisture verification misses this source. Call (361) 326-5060 for an exact quote – estimates are free.
Duct sealing fixes air leakage at joints, collars, and boots, plus reattaches disconnected or crushed runs. Cleaning removes dust and debris but doesn’t stop conditioned air from dumping into your attic or humid makeup air from entering the return. In Bloomingdale, sealing also includes moisture verification to address ground-driven humidity that cleaning alone can’t fix. Call (361) 326-5060 for an exact quote – estimates are free.
We pressurize the system and use smoke testing combined with camera inspection. If a register blows weak or not at all, or if the smoke shows air entering a wall cavity instead of the duct, we’ve found a disconnect. In Bloomingdale’s 1980s – 90s homes, we expect to find at least one crushed or sagging flex run on most original systems. Call (361) 326-5060 for an exact quote – estimates are free.
If you notice musty odors when power returns, yes. Humidity spikes inside ductwork during outages, and any existing leaks let that moisture penetrate deeper into the system. If your ducts were sealed more than a year ago, or if the seal job didn’t include moisture verification, a post-storm inspection is worth the call. Call (361) 326-5060 for an exact quote – estimates are free.
Ready to stop losing cooled air to your attic and pull musty odors out of your vents? Call Hollis Air Duct Cleaning at (361) 326-5060 for a free estimate on duct sealing in Bloomingdale. We’ll write the price before we start, seal it by the book, and stand behind the work for 365 days. That’s The Garrison Standard.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Bloomingdale and surrounding communities since 2004.




Before
After
Before
After
Before
After