Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Aberdeen
Duct sealing in Aberdeen typically runs $450 – $1,200 for a whole-home system, with most single-family jobs falling between $650 and $950. We’re usually on-site within a day or two of your call, scheduling from our Baltimore office but dispatching crews who know Aberdeen’s streets, its housing stock, and the specific problems this market throws at duct systems. If you’re seeing dust puff from your registers, rooms that never reach temperature, or utility bills that climbed for no clear reason, the culprit is often leaky ductwork – and in Aberdeen, the leak patterns depend heavily on whether you live in a post-BRAC townhome off MD-22 or an older rental near the proving ground.
Our Duct Sealing team serves Aberdeen homeowners with written prices before any work starts and the 365-Day Done Right Promise on every job. Call (361) 326-5060 for a free estimate.
Why Hollis Air Duct Cleaning Is Aberdeen’s Preferred Duct Sealing Company
We’ve been in business since 2004 as part of the Garrison Partners family, and our Baltimore office dispatches crews to Aberdeen daily. That longevity matters in a market where contractors come and go with the defense-contracting cycles. Our technicians are background-checked, uniformed, and expected to operate under The Garrison Code: arrive inside the quoted window, price in writing, complete the job by the book, and leave the site clean.
Aberdeen homeowners call us back because we document what we find. In a new townhome off MD-22, that means camera footage of construction debris in the flex runs. In an Edgewood-area rental near APG, it means photos of crushed duct in the crawlspace before we quote any sealing work. The price we write down is the price you pay – no ballooning at the door.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues, no waiting until Monday for a scheduling answer.
Our Duct Sealing in Aberdeen reputation rests on the 365-Day Done Right Promise: if our sealing work fails within a year, we return and make it right at no charge, including a free second visit. That’s written on every job, not implied.
Duct Sealing Services in Aberdeen
Duct Sealing Services in Aberdeen address a problem most homeowners don’t know they have: conditioned air escaping through gaps, joints, and seams before it ever reaches your rooms. We use professional-grade mastic sealant and metal-backed tape on accessible ductwork, pressurize the system to locate leaks, and verify results with before-and-after airflow measurements. In Aberdeen’s market, a typical whole-home duct sealing job runs $450 – $1,200 depending on system accessibility and the extent of leakage found.
Leak Detection and Pressure Testing
We start every Aberdeen job with a duct blaster test or equivalent pressure diagnostic. This pressurizes the duct system and measures total leakage against the conditioned floor area. A new townhome off MD-22 with builder-grade sealing often leaks 20 – 30% of its airflow; older Edgewood rentals with decades of DIY modifications can leak 40% or more. The test gives us a baseline and lets us show you the number in writing before we seal.

Mastic Sealing of Joints and Plenums
We seal with water-based duct mastic, not hardware-store tape that dries and fails. Mastic remains flexible, fills irregular gaps, and is rated for the temperature swings your Aberdeen ducts see year-round. We pay special attention to the air handler plenum and trunk-line connections – the joints builders most often skip, and the ones that pull humid attic air into your system during Aberdeen’s sticky summers.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Duct Insulation in Aberdeen
Duct Insulation in Aberdeen solves a different but related problem: thermal loss through thin or missing insulation on duct runs in unconditioned spaces. Even sealed ducts lose efficiency if they pass through a hot attic in July or a cold crawlspace in January. In Aberdeen’s humid Mid-Atlantic climate, uninsulated ducts also sweat, creating condensation that feeds mold and mildew growth. Typical duct insulation work in Aberdeen runs $600 – $1,500 for a full system, depending on linear footage and access difficulty.
Attic and Crawlspace Wrap
We install foil-faced fiberglass wrap or closed-cell foam insulation on exposed supply and return runs, sealed at all seams. In Aberdeen’s older homes near APG, we often find original ductwork with no insulation at all, or degraded wrap that sheds fibers into the airstream. Newer MD-22 townhomes may have insulated flex duct, but the insulation is often compressed or torn at hanger points.
Vapor Barrier Integration
Aberdeen’s proximity to the Chesapeake Bay and Bush River means summer dew points stay high for months. We specify insulation with intact vapor barriers to prevent condensation on cold duct surfaces. Without this, you’ll get water staining on ceiling drywall, musty odors at the registers, and eventually microbial growth inside the duct cavity – a problem we’ve documented repeatedly in Aberdeen’s new construction where builder-grade wraps failed within the first two cooling seasons.
Trusted Brands We Service in Aberdeen
Our crews carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, plus filtration and sealing products from Honeywell, Aprilaire, and Guardsman. For Aberdeen homeowners, this means we stock the mastics, tapes, and insulation wraps your specific system needs – no waiting on parts shipments, no substituting inferior materials because the van wasn’t loaded for your job. We source through Baltimore-area distributors with next-day availability on most items, so if your duct system needs a repair we didn’t anticipate, we’re back on schedule quickly.
Common Duct Sealing Problems We See in Aberdeen Homes
- Construction debris in new MD-22 townhomes. The post-BRAC building boom filled Aberdeen with tight modern duct systems that were never properly cleaned after construction. Drywall dust, sawdust, and flex-duct shavings sit in the supply and return ducts from day one, clogging filters and coating blower motors. Sealing a dirty system just traps the debris.
- Skipped air handler connections in builder-grade work. New Aberdeen townhomes frequently have gaps at the plenum and trunk-line joints where the builder’s crew ran out of time or material. These leaks pull humid Bush River-area attic air straight into your supply side, driving mold growth and spiking cooling costs.
- Crushed and disconnected flex in Edgewood rentals. Decades of quick-turnover renovations near APG have left mismatched, DIY-extended duct runs in crawlspaces and soffits. We’ve found flex duct flattened under storage items, chewed by rodents, or simply never reconnected after a flooring job. Sealing a physically broken run is pointless – we document it, show you the photo, and quote repair before any sealing begins.
- Humidity-driven tape failure. Aberdeen’s sticky summers degrade the cheap foil tape many contractors used in the 1990s and 2000s. We find entire trunk lines held together by dried, cracked tape that’s leaking 15 – 20% of conditioned air into the basement or crawlspace.
Pricing for Duct Sealing in Aberdeen, MD
Whole-home duct sealing in Aberdeen typically costs $650 – $950 for a single-family residence with accessible ductwork. Smaller systems or partial sealing of identified problem zones can run as low as $450; larger homes with ductwork in finished ceilings or tight crawlspaces may reach $1,200. Duct insulation adds $600 – $1,500 depending on linear footage.
What moves the price: system accessibility (crawlspace vs. finished basement), the extent of leakage found during pressure testing, whether we need to access soffits or chase walls, and whether repairs to crushed or disconnected duct are needed before sealing can be effective. We give you a written price before any work starts, and that price does not move at the door. No per-vent pricing, no teaser coupons that balloon once the technician is inside. Call (361) 326-5060 for a free estimate – we’ll pressure-test, show you the leakage number, and quote the sealing work in writing.
We Also Serve Cities Near Aberdeen
Our crews work throughout Harford County, including Aberdeen, Havre de Grace, Abingdon, Edgewood, and Bel Air. Scheduling and dispatch are coordinated from our Baltimore office, with local technicians assigned to your area for familiarity with the housing stock and common duct configurations.
Serving Aberdeen, MD - Our Local Coverage Area
We’re based in the Aberdeen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Aberdeen
Because builder-grade duct sealing in Aberdeen’s post-BRAC construction frequently skips critical joints. We were called to a new townhome community off MD-22 where the homeowner complained of drywall dust puffing out of the registers every time the blower motor kicked on. Our tech ran a camera inspection and found a layer of construction debris coating the inside of the flex runs, plus a disconnected joint at the air handler that was pulling attic air straight into the supply side. We performed source removal under negative pressure with HEPA filtration and agitation tools, resealed the joint, and the dust at the registers stopped immediately. If your home was built in the last 15 years along MD-22, assume the ducts were never properly cleaned or sealed at handover. Call (361) 326-5060 for an inspection.
Aberdeen’s humid Mid-Atlantic climate, amplified by proximity to the Chesapeake Bay and Bush River, means your HVAC system works hard year-round and duct surfaces stay damp for months. Leaky ducts pull that humid attic or crawlspace air into the system, where it condenses on cool surfaces and feeds mold growth. Proper sealing with mastic – not tape – plus intact vapor-barrier insulation, is what prevents this. Without it, we’ve documented mold and mildew buildup in Aberdeen homes within two cooling seasons of occupancy. Call (361) 326-5060 for a pressure test that shows exactly how much outside air your system is pulling in.
The builder should have performed source removal of construction debris from all duct runs, pressure-tested the sealed system for leakage against ANSI/ACCA standards, and verified that all plenum joints, trunk connections, and register boots were sealed with mastic. In Aberdeen’s new construction, we routinely find that none of this happened – the HVAC crew hooked up the equipment, ran a quick balance check, and moved to the next unit. The drywall dust and sawdust you see at your registers is evidence of a skipped step. We document what’s actually in your ducts, clean it out under negative pressure with HEPA filtration, then seal properly. Call (361) 326-5060 to schedule.
Yes, but the approach differs. These rentals often have decades of quick-turnover renovations with mismatched, DIY-extended flex duct that is crushed or disconnected inside crawlspaces and soffits. Sealing a system that is physically broken traps the problem and wastes your money. We inspect first with camera and airflow measurement, quote any necessary repairs or replacement of damaged sections, then seal the intact ductwork. The 365-Day Done Right Promise covers our sealing work regardless of your home’s age. Call (361) 326-5060 for an honest assessment.
Yes. Our sealing and cleaning protocols align with NADCA ACR guidelines for assessment, cleaning, and restoration of HVAC systems. This means negative-air containment during any pre-sealing cleaning, HEPA filtration on exhaust, and post-work verification that the system operates within design parameters. We use Rotobrush rotary brush systems and Nikro negative-air machines – the same tools commercial crews use – and we explain what we’re doing in plain terms while we work. The Garrison Standard requires completing the job by the book, and we document our work with before-and-after photos for your records. Call (361) 326-5060 to schedule.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Aberdeen and Harford County since 2004.




Before
After
Before
After
Before
After