Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Fort Worth, CA | Hollis Air Duct Cleaning
We’re Hollis Air Duct Cleaning, and we clean and repair the ductwork connected to Trane systems all over Fort Worth. This is independent service, so we’re not a Trane dealer or factory-authorized shop. What we do know is how Trane equipment behaves inside Fort Worth’s two very different housing stocks: the 1920s bungalows of Fairmount and the 2000s tract homes out by Alliance. Our techs understand Trane cabinet and coil geometry well enough to clean without disturbing factory seals or sensors. Call (361) 326-5060 for a written quote before we touch anything.
Why Fort Worth Residents Choose Us for Trane Service
We have cleaned and repaired hundreds of Trane in Arlington and Fort Worth bungalows and tract homes, and that repetition matters. A Trane XR14 in a pier-and-beam house on College Avenue is a different animal than the same unit in a slab-on-grade house in Saginaw. Roy Castellanos, our owner, worked sheet metal and duct systems in Los Angeles County for years before starting Hollis, and he drills the crew on one thing: know the cabinet, know the coil, know the duct run. That knowledge means we arrive with the right tools and the right approach for the house in front of us, not a rental vacuum and a coupon price. Every job gets a written price before it starts, and every job is covered by our 365-Day Done Right Promise in writing.
Common Trane Air Duct Cleaning Problems We Solve in Fort Worth
- Flexible duct collapse in hot attics. Trane XR and XB installs in North Fort Worth tract homes often use flexible mylar duct runs in attics that hit 140°F between June and September. The mylar sags, tears at the collar, and starts dumping conditioned air into the attic instead of the bedrooms. We inspect every run before cleaning so we can flag a torn flex run instead of cleaning around it.
- Dirty Trane evaporator coils from year-round humidity. Fort Worth’s humid subtropical summers keep the air conditioning running from May through October. A Trane all-aluminum evaporator coil traps dust and biological growth in that humidity, then blows it right back into the supply ducts as soon as the blower kicks on. Coil cleaning belongs on the same work order as duct cleaning, or the recontamination never stops.
- Debris-choked unlined trunks in older bungalows. Original metal trunks from the 1930s and 40s in the Near Southside and Fairmount collect decades of dust, plaster crumble, and pet hair. A surface-only vent vacuum misses the disconnected branch runs and the debris packed against the trunk floor. We see this constantly on Trane retrofits where the air handler was swapped but the original ductwork stayed.
- Variable-speed air handlers loading up on fine dust. Trane XV series units run long, low-CFM cycles instead of short bursts. That keeps temperatures steady, but it lets fine dust settle in return drops and blower wheels more than single-speed Trane XB models. In Fort Worth, where the AC runs most of the year, XV owners need more frequent cleaning than the national average.
- Pressure imbalances from poor branch sealing. Disconnected or poorly sealed branch runs pull attic air into the system, especially in pier-and-beam homes where runs snake under the floor. That means hot, dusty attic air enters the Trane coil, the blower works harder, and the supply registers never deliver steady flow. We mastic-seal branches as part of the job, not as an add-on.
Trane Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s a checkable Fort Worth fact that changes how Air Duct Cleaning - Fort Worth with Trane systems has to be done here. The original 1920s through 1940s ductwork in the Near Southside and Fairmount was frequently wrapped in asbestos-containing insulation. That material is stable when left alone, but a rotating brush or aggressive vacuum can disturb it and release fibers into the home. A lot of duct cleaning operations walk away from those houses or, worse, don’t know what they’re looking at. We handle it differently: containment setup before the vacuum runs, HEPA extraction, and no work that touches asbestos wrap without proper protocols. If you own a Trane system in one of those older bungalows, the preparation matters before anything else. It’s a local condition a generic franchise crew from outside Fort Worth won’t recognize.
Trane Models & Products We Service in Fort Worth
We work on the full range of Trane residential equipment that the big local installers have placed in homes across Fort Worth. That includes the XR series (XR13, XR14, XR16), the XB series (XB13, XB14), and the variable-speed XV series (XV18, XV20i), plus S-Series and S9V2 furnaces. When a component needs replacement, we use OEM Trane-compatible filters, gaskets, and mastic where fit matters. For flex duct sections and fittings, we carry quality aftermarket material that meets or exceeds OEM spec. We keep common filter sizes and coil-cleaning supplies stocked locally so a Fort Worth service call moves quickly, and if a Trane coil or air handler has failed from corrosion or a cracked drain pan in a hot attic, we’ll tell you plainly when repair money is wasted and replacement is the only sensible path.
Trane Service Pricing in Fort Worth
Here’s honest range information, because you should know this before you call. Full duct cleaning on a typical Fort Worth home generally runs $450 to $900, depending on system size, number of returns, and how much debris is packed in the runs. Add evaporator coil cleaning and the total usually lands between $600 and $1,200. Flex duct repair runs $175 to $450 per run depending on length and access. The two factors that push Fort Worth prices higher than dryer markets are attic access in 140°F summer conditions and the extra containment work older bungalows require. Every quote is written before we start, and it does not move at the door. Call (361) 326-5060 and we’ll give you a real number over the phone and on paper.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Fort Worth
Yes, with the right restrictions. We set up containment and HEPA extraction before running any vacuum on a system with asbestos-wrapped insulation, and we never disturb the wrap itself as part of the cleaning. Clean ducts, straight answers, that’s the whole job.
In August, your attic is hitting 130 to 140°F and flexible mylar duct runs are sagging or tearing at the collar. The system is blowing conditioned air into the attic instead of the house. We inspect every flex run during a cleaning call and can repair or replace torn sections the same day. Call (361) 326-5060 for an attic inspection.
Yes, because Fort Worth’s humidity keeps moisture on the coil for months at a time, and dust sticks to that wet surface and builds biological growth. In a dry climate like Phoenix, the coil stays drier and loads up slower. We recommend coil cleaning with duct cleaning in Fort Worth every three to five years.
They need attention to different spots. XV systems run long, low-CFM cycles that deposit fine dust in return drops and on the blower wheel. XB and XR single-speed units push harder and tend to collect debris at the supply register boots. We clean both, but the access points we prioritize are different.
No, duct cleaning does not void the Trane equipment warranty because the ductwork is separate from the equipment. What matters is that whoever does the work does not disturb the air handler cabinet seals or factory sensors. Our techs are trained on Trane cabinet geometry specifically to avoid that. For an exact quote, call (361) 326-5060 and we’ll walk you through what the job includes.
Service Areas Near Fort Worth
We run crews across the whole Fort Worth service area, including the Near Southside, Fairmount, Riverside, Saginaw, and the Alliance/Keller corridor. Hollis also provides Trane sales & service support from our other locations. If you’re outside the metro, our Trane service in Jacksonville team handles the coastal region, and our Trane service in Austin crew covers the Hill Country. For this area, see our Fort Worth service area page for the full list of neighborhoods we work.
Book Your Trane Service in Fort Worth Today
Call (361) 326-5060 and a live person will answer, take your details, and schedule a service window that works for your day. We bring the equipment, the written price, and the same crew from start to finish. Done right, backed in writing for a year.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Fort Worth since 2004.