L

Lennox Air Duct Cleaning in Fresno, TX

Every visit starts with

Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents

Worth knowing

That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.

Styles & brands we work with

Whole-home duct cleaning
Whole-home duct cleaning
Dryer vent cleaning
Dryer vent cleaning
Camera inspection
Camera inspection
Sanitizing & deodorizing
Sanitizing & deodorizing

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lennox Air Duct Cleaning in Fresno, CA | Hollis Air Duct Cleaning

We provide independent Lennox air duct cleaning, coil cleaning, and flex duct repair across Fresno. Most Lennox systems we open up here have one thing in common: the attic heat has been working on the duct liner since the day it was installed. If your Lennox system is blowing dust or has lost airflow, call Hollis Air Duct Cleaning at (361) 326-5060 and we’ll give you a written price before anything gets touched.

Call (361) 326-5060

Fresno’s cooling season runs from May through October, which means your Lennox air handler is cycling valley air through those ducts for six solid months. Dust, pollen, wildfire-smoke residue, and the occasional construction-debris surprise all settle in the trunk lines and branch runs. Our techs know exactly where Lennox systems collect that material and how to remove it without tearing up the flex. We also handle Lennox sales & service questions if you’re weighing a repair against replacement.

Why Fresno Residents Choose Us for Lennox Service

Roy Castellanos, our owner, spent years in the mechanical trades across Los Angeles County before starting Hollis Air Duct Cleaning. He learned duct work through the sheet metal and air conditioning program at Los Angeles Trade-Technical College, and he built this company on one rule: leave the system cleaner than you found it, no upsells, no guesswork. That carries through every Lennox job we take on in Fresno.

We treat Lennox systems as their own animal. Their cabinet fittings are tight, their flex duct specs are specific, and their blower assemblies collect fine valley dust differently than other brands. Our techs stock OEM-spec gaskets, mastic, and UL-181-listed flex so repairs happen in one visit. We’re an independent Lennox service provider, not manufacturer-authorized, which means we answer to you and the work, not a corporate warranty department. Every job gets a written price before we start. Every job is covered by our 365-Day Done Right Promise.

Common Lennox Air Duct Cleaning Problems We Solve in Fresno

These are the issues we see most often when we open up Lennox systems in Fresno homes:

  • Cooked flex duct liners. Lennox flexible duct in Fresno attics, especially in the R-4 through R-8 range, gets baked by 140-160°F attic temps all summer. The mylar facing cracks and delaminates, and fiberglass particles start blowing through the registers. You’ll see fine gray dust on furniture within hours of the system running.
  • Dust-loaded blower wheels. Lennox air handlers with PSC or variable-speed blower wheels collect a dense coating of valley dust and wildfire-smoke residue on the fins. The wheel gets out of balance, airflow across the coil drops, and the system runs longer to hit the same setpoint. A cleaning often restores airflow without replacing anything.
  • Blocked evaporator coils. Top-connection Lennox evaporator coils in cased enclosures trap PM2.5 that slips past standard 1-inch filters. The coil partially blocks, which mimics a refrigerant issue and drives up head pressure when Fresno hits 105°F. Cleaning the coil fixes what looks like an expensive repair.
  • Leaky return trunks. Lennox high-efficiency furnaces with secondary heat exchangers recirculate fine dust from leaky return trunks. That dust accelerates soot buildup on the secondary coil and quietly degrades combustion efficiency. Sealing the return and cleaning the secondary fixes it.
  • Disconnected or sagging flex runs. Attic heat softens the duct supports and tape on older Lennox installs. Runs sag, kink, or separate at the takeoffs, and conditioned air dumps into the attic instead of the living space. We find this constantly in Fresno’s 1980s-2000s stucco tracts.

Lennox Service in Fresno: What Local Conditions Mean for Your Equipment

Here’s the thing about Fresno that most generic duct cleaning pages won’t tell you. This city sits in the San Joaquin Valley, which routinely fails federal PM2.5 and ozone standards. Your Lennox system is pulling that particulate into the return, pushing it across the coil, and blowing it through the supply runs for half the year. No coastal California city has that combination. And when you add a six-month cooling run to the equation, the ducts never get a break long enough for the accumulated material to settle out. It just keeps recirculating.

In a 1990s stucco subdivision near Bullard and West in north Fresno, we cleaned a Lennox SL280V furnace and matching air handler where the homeowner kept finding gray dust on the furniture within hours of the system kicking on. Video inspection showed the mylar liner on two supply flex runs had cracked and was shedding into the airstream. We replaced the damaged sections with OEM-spec R-8 flex, mastic-sealed the takeoffs, and cleaned the blower wheel. The dust complaints stopped immediately. That’s the Fresno failure mode that techs in cooler markets rarely see. our Dryer Vent Cleaning in Fresno - plus clean ducts, straight answers - that’s the whole job.

Lennox Models & Products We Service in Fresno

We work on the full Lennox residential lineup. The Merit Series, including the 14ACX and ML14XC1 air conditioners with matching indoor coils, shows up all over Fresno’s post-WWII tract homes. The Elite Series, like the EL16XC1 and XC21 variable-speed systems, sits in a lot of the 1980s-2000s stucco subdivisions north and northeast of downtown. The Dave Lennox Signature Collection, including the SL28XCV and SL280V furnaces and air handlers, is common in newer construction. We also clean and service Lennox Healthy Climate media cabinets and filtration accessories paired with these systems.

On the parts side, we use OEM-spec flexible duct, mastic, and gaskets for Lennox repairs because the factory tolerances on their cabinet fittings are tight. When an aftermarket UL-181-listed component offers better heat resistance in a Fresno attic, we’ll explain why and use it instead. We stock the common sizes locally so most Lennox jobs wrap up in one visit.

Lennox Service Pricing in Fresno

Lennox air duct cleaning in Fresno typically runs $350 to $600 for a full system, depending on the number of supply runs, the number of returns, and how much material has built up. Flex duct repair or replacement usually adds $150 to $300 per section depending on the run length and access. Evaporator coil cleaning typically runs $200 to $400 as a standalone service or less when paired with a full duct cleaning. These are whole-system prices: one flat number, written down, before we touch anything. No per-vent pricing, no surprises at the door.

The variables that move the price are the number of registers, the age and condition of the flex, and whether the blower wheel and coil need a deep clean while we’re in there. Every estimate includes a video inspection of the duct interior so you can see what we found and why we’re recommending what we’re recommending. For an exact quote on your Lennox system, call (361) 326-5060. Estimates are free.

Serving Fresno, TX - Our Local Coverage Area

We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs – Lennox Air Duct Cleaning in Fresno

Service Areas Near Fresno

Our Fresno crews serve the whole metro area and the surrounding San Joaquin Valley communities. If you’re in Clovis, Madera, Selma, Sanger, or Reedley, we can reach you on the same schedule we run for Fresno. For work in other parts of the state, see our Fresno service area page for details, or find our Lennox service in Sacramento and Lennox service in Atlanta pages for work in those metros.

Book Your Lennox Service in Fresno Today

If your Lennox system is blowing dust, short-cycling, or just not moving as much air as it used to, call Hollis Air Duct Cleaning at (361) 326-5060. We’ll schedule a visit, inspect the ducts with a camera, and hand you a written price before any work begins. Fresno attics don’t fix themselves, and neither do Lennox ducts.

Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Fresno since 2004.

Need Air Duct Cleaning help in Fresno? Licensed & insured · Price agreed before we start response · free estimates
Call (361) 326-5060
Areas We Serve

Request a Free Estimate in Fresno

Tell us what you need - Hollis Air Duct Cleaning responds fast. No obligation.

When you send us your details, you confirm you have read our Privacy Policy and consent to receive communications by phone, text, or email regarding your project, including by the service partners who may complete the work.

Call Now - 24/7 Dispatch