Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterCarrier Air Duct Cleaning in Dallas, CA | Hollis Air Duct Cleaning
Carrier air duct cleaning in Dallas typically costs $450 to $900 for a whole-home system, and most jobs are completed in 4 to 6 hours. We’re an independent Dallas, TX-based company that’s worked on Carrier ducted and variable-speed systems for decades, and the thing that sets our approach apart here is simple: we know what Dallas attics do to Carrier systems. If your ducts are moving less air than they should, call (361) 326-5060 for a written estimate before any work starts.
Why Dallas Residents Choose Us for Carrier Service
We’ve spent years pulling flex duct out of Dallas attics that hit 140°F in August, and we know exactly what that heat does to the connections at a Carrier air handler. Roy Castellanos, our owner, came up through the mechanical trades in Los Angeles County and trained in the sheet metal and air conditioning program at Los Angeles Trade-Technical College before starting Hollis Air Duct Cleaning. That background means we approach Carrier ductwork the way a tradesperson should: find the actual problem, show you what we found, write the price down before we touch anything.
We’re not a manufacturer-authorized Carrier dealer, and we won’t pretend otherwise. What we are is honest about what an independent specialist can and cannot do. For Carrier sales & service, we’ll tell you straight whether a repair makes sense or whether you’re better off calling someone else. For duct cleaning, sealing, and flex duct repair, this is exactly what we do. Every technician who walks through your door in Dallas is background-checked and uniformed, and every job carries our 365-Day Done Right Promise in writing.
Common Carrier Air Duct Cleaning Problems We Solve in Dallas
- Crushed flex duct at Carrier air handlers in hot attics. Homes built in Frisco and Plano during the 1990s and 2000s often have Carrier systems connected to flexible duct runs that snake through unconditioned attics. When those attics hit 140°F, the duct liner softens and collapses under its own weight. That restricts airflow, makes your Carrier blower motor work harder, and shortens its life. We reroute, replace the crushed section, or seal it properly.
- Mold on Carrier evaporator coils and condensate pans. Dallas’s humid subtropical climate means your Carrier unit’s coil sees condensation almost year-round. When ducts run through unconditioned attics, that moisture doesn’t dry out the way it should. We clean evaporator coils using negative-air containment so mold doesn’t spread through the supply side while we work.
- Attic insulation fibers pulled into undersized Carrier ducts. Older East Dallas homes, especially the pre-war bungalows in Oak Cliff, often had original galvanized ductwork that was sized for a window unit or small furnace. When a Carrier system gets added later, that ductwork is too small. The pressure imbalance pulls insulation fibers, dust, and whatever else is in the attic straight into your living space.
- Leaky flex duct connections at multi-zone Carrier systems. Newer construction in Dallas frequently includes two or three HVAC zones, each with its own Carrier air handler and a spiderweb of flex duct. The connections at the plenum are the failure point. A half-inch gap at a collar can leak 20% of your conditioned air into the attic while pulling attic dust into the return side.
- Dust and debris from storms and construction. Dallas gets real wind, real storms, and a steady amount of remodeling. That debris ends up in your return ducts, then across your Carrier coil, then back into your house. Video inspection before and after shows you exactly what was in there and what it looks like when we’re done.
Carrier Service in Dallas: What Local Conditions Mean for Your Equipment
Here’s what most generic Carrier pages don’t tell you about Dallas. The post-1990s suburban construction boom that built out Frisco, Plano, and the northern suburbs put Carrier systems in homes faster than builders could properly design ductwork. We regularly see 2005-era homes with Carrier Infinity systems connected to flex duct that was installed quickly, sealed with tape that failed years ago, and run through attics that hit 140°F+ every summer. That heat doesn’t just make the attic uncomfortable; it accelerates the breakdown of the duct liner and adhesive. The result is a Carrier system that’s still mechanically fine but can’t move air the way it was designed to. Our Dallas service area covers the full range of this problem, from original galvanized ducts in Oak Cliff bungalows to failing flex runs in Frisco tract homes. We recently serviced a 2005-built home in Frisco with a carrier Infinity system where the homeowner complained of dust and high summer bills. Video inspection revealed crushed flex duct in the attic and a moldy evaporator coil. We rerouted and sealed the duct, cleaned the coil, and airflow improved dramatically.
Carrier Models & Products We Service in Dallas
We work on the full Carrier residential lineup: the Infinity series with Greenspeed variable-speed air handlers, the Performance series, the Comfort series, and older 24ANB7 and 24ACC6 air conditioners paired with Carrier gas furnaces. For controls and major components, we use OEM Carrier parts when available. For standard flex and metal duct repairs, we use high-quality aftermarket fittings that meet or exceed OEM specs and cost you less. If a Carrier unit has a failed heat exchanger or compressor, we’ll give you a repair-vs-replace analysis based on the unit’s age, its efficiency rating, and what you actually pay for electricity in Dallas. No pressure, just numbers.
Carrier Service Pricing in Dallas
Air Duct Cleaning in Dallas for whole-home Carrier systems generally runs $450 to $900 depending on the number of zones, the linear feet of ductwork, and whether we’re also cleaning the evaporator coil. Adding video inspection is $99, and it’s worth doing once so you have a baseline. Flex duct repair or replacement is priced per job after we see the attic, and the price is written down before any work begins. A free estimate includes a walkthrough of your system, an explanation of what we found, and a line-item price you can compare. Call (361) 326-5060 and we’ll give you exact numbers for your house.
Serving Dallas, GA - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Carrier Air Duct Cleaning in Dallas
Yes, and it matters more than most people realize. When ducts run through a Dallas attic that hits 140°F in summer, the flex duct liner softens and can collapse during aggressive cleaning if the technician doesn’t know what they’re doing. We use lower-pressure negative-air extraction and inspect for existing damage before we start. Call (361) 326-5060 and we’ll explain what your attic layout means for your system.
Yes. We clean Carrier evaporator coils using containment and negative-air so mold and debris don’t blow into your living space while we work. This is one of the highest-value services for Dallas humidity, because a dirty coil on a Carrier system in this climate loses efficiency fast.
Every 3 to 5 years for most Dallas homes, and closer to 3 if you have pets, remodeling dust, or a high pollen season like the one we get every spring from oak and ragweed. If you haven’t had the ducts cleaned since you moved in, call (361) 326-5060 and we’ll help you figure out where you stand.
For controls and major Carrier components, yes, we use OEM parts when available. For flex duct, fittings, and sealing, we use aftermarket materials that meet or exceed OEM specs. The ductwork isn’t usually a Carrier-branded part to begin with, and we’ll show you exactly what we’re using and why before we install it.
It adds time and cost because each zone has its own runs, dampers, and often its own air handler in the attic. Dallas homes with two or three zones need each zone cleaned separately to do the job right, and we can bundle our Dryer Vent Cleaning in Dallas into the same visit if needed. We’ll price the whole system before we start, so there’s no per-zone surprise. Call (361) 326-5060 for a written estimate.
Service Areas Near Dallas
We serve the wider Dallas market and can often schedule work in nearby areas depending on crew availability. That includes homeowners looking for Carrier service in Brooklyn and Carrier service in Cleveland. If you’re outside Dallas proper, call (361) 326-5060 and we’ll confirm whether we can get to you.
Book Your Carrier Service in Dallas Today
We answer the phone live, 24/7. Tell us what’s going on with your Carrier system, and we’ll get you scheduled for a free estimate and a written price before any work begins. Clean ducts, straight answers – that’s the whole job. Call (361) 326-5060.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Dallas since our founding as part of the Garrison Partners family.