Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterCarrier Air Duct Cleaning in Austin, CA | Hollis Air Duct Cleaning
Carrier air duct cleaning in Austin typically runs $425 – $875 for a full system, and we’re the independent crew that shows up with a written price before we touch anything. We’ve worked on Carrier systems across Austin for years, from 1990s tract homes in Round Rock to pier-and-beam bungalows in Hyde Park, so we know how Carrier ductwork behaves when cedar pollen and caliche dust get involved. Call (361) 326-5060 for a free estimate.
Why Austin Residents Choose Us for Carrier Service
We’re an independent Carrier service provider, not manufacturer-affiliated or authorized, and that’s the point. We solve the problem in front of us instead of defaulting to a factory script. Roy Castellanos grew up in Boyle Heights and spent years in the mechanical trades across Los Angeles County, learning HVAC fundamentals through the sheet metal and air conditioning program at Los Angeles Trade-Technical College before starting Carrier sales & service work that eventually became Hollis Air Duct Cleaning. What that means for you: when we open your Carrier air handler, we’re looking at it the way a tradesperson looks at a system, not the way a call center reads a trouble ticket.
We stock quality aftermarket flex duct, mastic, and filter grilles that meet or exceed Carrier specs. When a genuine replacement is the right call, we source OEM Carrier coil panels, blower wheels, and control boards. Every job gets a written price before work starts, and every job is covered by the 365-Day Done Right Promise. If the work fails within a year, we come back and make it right at no charge.
Common Carrier Air Duct Cleaning Problems We Solve in Austin
- Caked evaporator coils on humid summer days. Carrier cased coils in Austin’s long, humid summers develop microbial growth on the upstream face when return ducts run under-insulated through unconditioned attics. The coil stays wet and pulls caliche dust off the air, which cakes into a mat. We clean the coil, seal the return, and the system breathes again.
- Collapsed flex duct in west Austin attics. Builder-grade Carrier air handlers paired with undersized flex-duct runs in Westlake and Bee Cave attics cause high static pressure. The blower wheel loads unevenly, and the flex duct inner liner collapses and traps cedar and oak pollen. We reroute and resize the run, clean the blower wheel, and static pressure drops.
- Dried-out mastic on older central Austin bungalows. Carrier metal trunk lines in Hyde Park, Travis Heights, and Rosedale were often sealed with failing duct tape or mastic that has dried out. Return-side leaks pull caliche dust straight into the coil cabinet. We strip the old sealant and apply fresh mastic that actually holds.
- Infinity control faults that aren’t the equipment. Carrier communicating systems can throw a static pressure or airflow fault that looks like an equipment failure but is really a duct and filtration problem. A dirty return-side static pressure sensor or a pollen-clogged filter grille triggers the code. We diagnose the duct system before recommending any board replacement.
- Construction debris in new-build Carrier systems. Austin’s explosive growth has stacked brand-new high-density construction directly beside 1950s bungalows. New-build ducts are packed with drywall and construction debris, and Carrier air handlers in those homes circulate that dust through the coil from day one. We pull it out before it becomes a permanent coat on the blower.
Carrier Service in Austin: What Local Conditions Mean for Your Equipment
Here’s the thing about Austin that most duct-cleaning pages never connect: there’s no real off-season here. In colder markets, duct systems get a dormant stretch where dust settles and you can schedule cleaning around heating season. Austin doesn’t work that way. Carrier systems here run nearly continuously from the June-September heat straight into cedar-fever season, so pollen and caliche dust never get a dormant period to settle out. That’s why Air Duct Cleaning - Austin homeowners schedule matters. They bake onto the coil and blower instead.
Take the limestone-and-caliche hills west of town. In Westlake and Bee Cave, new homes often have long, undersized flex-duct runs in unconditioned attics. When summer attic temps hit 130 – 140°F, that flex duct sweats, degrades, and pulls caliche dust into the supply. You won’t see that failure pattern in Houston’s flat, humid, different-soil market. It’s an Austin-specific problem, and it means Carrier owners in this city need duct cleaning and sealing that’s scheduled around runtime, not around a calendar. We also recommend Austin Dryer Vent Cleaning as part of a complete home maintenance plan. We pulled a Carrier Performance air handler out of a 1950s Travis Heights pier-and-beam bungalow where the return had been pulling cedar and oak pollen through a dried-out mastic joint for years. The blower wheel was so caked we had to scrape it before balancing. After sealing the return with fresh mastic, cleaning the evaporator coil, and rerouting a collapsed flex run in the attic, static pressure dropped and the homeowner finally got airflow back in the back bedrooms.
Carrier Models & Products We Service in Austin
We service the full Carrier lineup across Austin: the Infinity series with variable-speed air handlers and communicating controls, the Performance series with single- and two-stage systems that show up in tract homes all over Round Rock and Cedar Park, and the Comfort series builder-grade units common in Pflugerville and Kyle. We also handle 24ANB and 24ACC condenser pairings with matching cased coils and plenums.
Our parts approach is straightforward. We stock quality aftermarket flex duct, mastic, and filter grilles that meet or exceed Carrier specs, and we source OEM Carrier coil panels, blower wheels, and control boards when a genuine replacement is the right call. On older Carrier air handlers, we’ll tell you honestly when duct sealing and coil cleaning will restore performance versus when the cabinet and coil are past the point where repair makes financial sense. No guesswork, no upsell.
Carrier Service Pricing in Austin
Full system cleaning in Austin typically lands between $425 and $875. Evaporator coil cleaning runs $180 – $340 when done as part of a full service. Duct sealing starts around $300 for basic return-side work and goes up from there depending on how many runs need attention.
What drives the cost here: older central Austin bungalows with pier-and-beam foundations often have harder-to-access trunk lines, and west Austin attics with collapsed flex runs take more labor than a simple clean. The free estimate covers all of it. We look at the system, we write down a number, and that number doesn’t move at the door. Call (361) 326-5060 for an exact quote.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Carrier Air Duct Cleaning in Austin
My Carrier Infinity control is showing a static pressure or airflow fault – does that mean the equipment is failing?
Not usually. In Austin, that fault is often a dirty return-side static pressure sensor or a pollen-clogged filter grille, not a failing board. We test the duct system before recommending any equipment replacement. Call (361) 326-5060 and we’ll walk you through what to check.
How often should Carrier ductwork in Austin be cleaned given cedar season and near year-round AC use?
Every 3 to 5 years for most Austin homes, but 2 to 3 years if you have pets, live near active construction, or notice dust collecting on vents within days of cleaning. The year-round runtime means your system never gets a break, so the load accumulates faster than in colder markets.
Can you seal leaking Carrier flex duct in a Westlake or Bee Cave attic without replacing the whole run?
Yes. If the inner liner is intact, we seal the connections with mastic and re-support the run so it doesn’t sag and trap debris. If the liner has collapsed, the run gets replaced. We’ll show you what we found before we quote the work.
Will cleaning my Carrier evaporator coil actually improve cooling in an Austin summer?
Yes. A caked coil restricts airflow and reduces heat transfer, which means your system runs longer to hit the same temperature. In Austin’s August heat, that’s the difference between a system that keeps up and one that doesn’t. Call (361) 326-5060 for a free estimate.
Do you work on Carrier systems in both older central Austin bungalows and newer suburban builds?
Yes. We’re in Hyde Park, Travis Heights, and Rosedale pier-and-beam bungalows one day, and Round Rock, Cedar Park, Pflugerville, and Kyle tract homes the next. The problems are different, and so is the fix. We’ve seen both enough to know the difference.
Service Areas Near Austin
We serve the Austin service area and surrounding markets. If you’re in a neighboring city, we also offer Carrier service in San Jose and Carrier service in Columbus for those who need the same standard elsewhere. The work stays the same: written prices, no upsell, ducts cleaned by the book.
Book Your Carrier Service in Austin Today
Call (361) 326-5060 and we’ll set up a free estimate. Clean ducts, straight answers – that’s the whole job.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Austin since 2004.