Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Ruskin
Air duct cleaning in Ruskin typically runs $350 – $650 for a full residential system, with most jobs completed in a single morning or afternoon. We’re the Air Duct Cleaning in Ruskin crew local homeowners call when filters clog within months of closing, airflow drops at the far end of the house, or a new build still smells like drywall dust six months in. Our dispatch team operates from our South Florida office, with technicians routed to Ruskin homes across Waterset, MiraBay, Southshore Bay, and the older pockets near U.S. 41. Call (361) 326-5060 and you’ll reach a live person who can book your free estimate and explain what your specific system needs before anyone steps through your door.
Why Hollis Air Duct Cleaning Is Ruskin’s Preferred Air Duct Cleaning Company
We’ve been doing this since 2004 as part of the Garrison Partners family, and the Ruskin market is unlike anywhere else we serve in Florida. Most of your neighbors’ homes went up after 2010. That means we’re not pulling out decades of layered grime like we do in older Tampa neighborhoods. We’re removing construction debris that never should have been left behind, and we’re finding the installation errors that builders missed.
Our technicians are background-checked, uniformed, and expected to perform by The Garrison Code: arrive inside the quoted window, price the job in writing before touching equipment, complete the work by the book, and leave the site clean. Every job carries our 365-Day Done Right Promise. If the work fails within a year, we come back and make it right at no charge, including a free second visit. That promise is backed in writing on every invoice, not offered verbally and forgotten.
Phones are answered by a live person 24 hours a day, seven days a week. No callback queues. No voicemail loops. No waiting until Monday to schedule.
Ductwork Cleaning in Ruskin
Ductwork Cleaning in Ruskin is almost always a post-construction job. The master-planned communities that define this market, Waterset, MiraBay, and Southshore Bay, were built fast during the 2010s and 2020s boom. Drywall dust, insulation fragments, and wood debris get left in the ducts. Then Florida’s humidity turns that fine dust tacky. It sticks to the flexible duct liner in your attic instead of traveling to the filter. Six months after closing, your filter is loaded solid and your master bedroom vent is barely moving air.
Our Air Duct Cleaning team uses source removal methods designed for exactly this problem. We seal the system, apply negative pressure with a Nikro negative-air machine, and agitate the debris with a Rotobrush rotary brush system so it releases from the duct walls and gets captured in HEPA filtration. Vacuum-only cleaning doesn’t cut it here. The dust is too sticky.
What Source Removal Actually Means
Source removal is the industry term for getting the contamination out of the duct instead of pushing it around. We attach a powerful vacuum to your air handler, seal every register, then use mechanical agitation to knock debris loose. The negative-air machine maintains constant suction so nothing escapes into your living space. For a typical Ruskin single-story, this process takes three to four hours.
When Sealing Matters More Than Cleaning
Sometimes we open a system and find the real problem isn’t debris, it’s a crushed flex run pinched behind a platform or disconnected at a junction box. Cleaning around that is pointless. We cut out the damaged section, re-seal with Duct Sealing in Ruskin mastic, and test airflow before we leave. Roy Castellanos trains our crews to flag this on every job, because in Ruskin’s new builds, it’s more common than you’d expect.
Air Duct Inspection in Ruskin
Air Duct Inspection in Ruskin should happen before you sign off on a new build, and again at the two-year mark when construction debris has had time to migrate. We run a video camera through your supply and return lines from the air handler to every major junction. You see what we see: crushed flex, gaps at connections, debris piles, and moisture staining that signals a humidity problem developing.
An inspection runs $150 – $250 in the Ruskin market. If you proceed with cleaning, we apply that toward the full job. The inspection itself takes about an hour. You get a written report with photo documentation and a clear recommendation on whether cleaning, sealing, or both are warranted.
What the Camera Reveals in New Builds
In Waterset and MiraBay, we regularly find second-floor flex runs compressed to half their diameter behind the air handler platform. Builders sometimes frame right over the duct. The camera catches it every time. We mark the location, explain the repair, and quote it in writing before cutting anything open.
Post-Inspection Documentation
Your report includes still images from the camera, airflow readings at each register, and a written price for any recommended work. No verbal estimates. No numbers that shift when the technician arrives. This is how The Garrison Standard works in practice.
Trusted Brands We Service in Ruskin
We stock parts and filtration products from Honeywell, Aprilaire, and Guardsman for Ruskin customers, with same-week availability on most items. Our equipment roster includes Rotobrush rotary brush systems and Nikro negative-air machines, the same tools commercial crews use in hospitals and schools. When we recommend a filtration upgrade after cleaning your Ruskin system, we’re not ordering special parts from out of state. We carry them. That means faster turnaround and no return visits because the right component wasn’t on the van.
Common Air Duct Cleaning Problems We See in Ruskin Homes
- Crushed flex runs behind finished walls. Builders in Ruskin’s newer subdivisions often leave flexible ductwork pinched or disconnected where it passes through framing. A standard clean restores airflow only until the next season of year-round HVAC use pushes fine drywall dust back into the kink. The real fix is cutting, re-routing, and sealing.
- Humidity-bound construction dust. Ruskin’s humid subtropical climate keeps attic ductwork damp enough that drywall dust binds to the interior liner instead of releasing to the filter. Vacuum-only cleaning leaves most of it behind. Mechanical agitation under negative pressure is required.
- Filter clogging within months of closing. Homeowners in MiraBay and Southshore Bay replace filters monthly and still see restricted airflow. The restriction is usually in the supply and return runs and at the air handler, where debris never reaches the filter slot. Changing filters faster doesn’t solve it.
- Oversized systems short-cycling into the ductwork. Ruskin’s rapid build pace sometimes meant HVAC sizing was rushed. An oversized unit cools too fast, doesn’t run long enough to dehumidify, and leaves moisture in the ducts that feeds mildew growth on construction dust already inside.
Pricing for Air Duct Cleaning in Ruskin, FL
A typical residential duct cleaning in Ruskin runs $350 – $650 for a full system, depending on the home’s size, the number of supply and return registers, and whether we find damaged ductwork that needs sealing. Commercial systems start around $800 and scale with square footage and accessibility. Video inspection is $150 – $250, applied to the cleaning price if you move forward.
What moves the number: homes with more than one air handler, ductwork in a sealed attic that requires extra setup time, and repairs to crushed or disconnected runs that we discover during the job. We price those in writing before starting the work, not after. One flat price per system, agreed before we touch it. No per-vent pricing that balloons at the door. No teaser coupon that doesn’t match the final invoice.
Call (361) 326-5060 for a free estimate. We’ll ask about your home’s age, square footage, and any airflow issues you’re seeing, then give you a realistic range before scheduling.
We Also Serve Cities Near Ruskin
Our crews work throughout southern Hillsborough County, including Ruskin, Sun City Center, Apollo Beach, Wimauma, and Gibsonton. If you’re in a surrounding community and seeing the same post-construction debris issues, the same humidity-related binding, or the same builder-grade installation problems, we cover your area with the same written pricing and 365-Day Done Right Promise.
Serving Ruskin, FL - Our Local Coverage Area
We’re based in the Ruskin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Ruskin
Yes, if the builder didn’t cap the registers during construction and perform a post-build blowout. In Waterset and MiraBay, we find drywall dust, insulation fragments, and wood debris in ducts of homes that passed final inspection. A pre-move-in clean removes that load before you start breathing it, and a camera inspection catches the crushed runs and disconnects that builders often miss. Call (361) 326-5060 to schedule before your move-in date.
Weak airflow in a new Ruskin home usually means debris is restricting the duct, or a flex run is crushed or disconnected behind a wall. The debris is typically construction dust that humid attic air has glued to the duct liner. The crushed run is an installation error. Either way, the filter change won’t fix it. We diagnose with a camera inspection and restore airflow with source removal and sealing as needed. Call (361) 326-5060 for a free estimate.
Yes. Ruskin’s humid subtropical climate means HVAC systems run year-round and attic ductwork stays damp enough to bind dust to the liner. Where a drier climate might see five to seven years between cleanings, Ruskin’s new builds often need their first thorough cleaning within the first two years, and every three to four years after that if the system is properly sealed. Homes with oversized units that short-cycle may need more frequent attention.
We arrive in the quoted window, inspect the system with a video camera, and give you a written price before starting. We then seal the registers, attach a Nikro negative-air machine to your air handler, and use a Rotobrush rotary brush system to agitate debris loose from every supply and return line. HEPA filtration captures what we remove. We repair any crushed or disconnected flex runs with duct sealing mastic, test airflow at each register, and leave the site clean. The whole process takes three to five hours for a typical Ruskin home. Call (361) 326-5060 to book.
It can, if the allergen load is coming from the ductwork itself. Construction dust, mold spores on damp duct liner, and pollen that entered during the build are all removable. But duct cleaning is not a cure for allergies caused by outdoor pollen, pet dander, or other sources inside the home. We assess whether your ducts are likely contributors during the inspection, and we won’t sell you a clean if the problem is elsewhere. Call (361) 326-5060 and we’ll give you a straight answer.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Ruskin since 2004.