Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Columbus, CA | Hollis Air Duct Cleaning
Columbus Air Duct Cleaning for Trane systems costs between $285 and $520 for a whole-home system, and the work takes four to six hours. We’re an independent Trane service provider, not a manufacturer shop, and we cover every Columbus neighborhood from Clintonville to Dublin. The thing that separates our Trane work here is simple: we know what central Ohio’s humidity and aging housing stock do to Trane systems, and we price the job in writing before we touch anything. Call (361) 326-5060 for a free estimate.
Why Columbus Residents Choose Us for Trane Service
Our technicians have cleaned and repaired thousands of feet of Trane ductwork across Columbus, from older galvanized systems in Clintonville to flex-duct runs in Dublin. We understand how Trane air handlers, coils, and plenums behave under central Ohio’s humid summers and cold winters. That matters because a Trane XV20i variable-speed system reacts to dirty ductwork differently than an older XB13 builder unit, and treating them the same is how small problems become coil freeze-ups or blower motor failures. Roy Castellanos grew up in Boyle Heights and trained in mechanical trades through the sheet metal and air conditioning program at Los Angeles Trade-Technical College before starting Hollis. He built this company around a single standard: leave the system cleaner than we found it, no upsells, no guesswork. We’re an independent service provider and are not authorized, endorsed, or sponsored by Trane. That independence means we recommend what the equipment actually needs, not what a corporate program tells us to sell. For Trane sales & service questions, we’ll always point you to the straight answer.
Common Trane Air Duct Cleaning Problems We Solve in Columbus
- Rust flaking in original galvanized ducts. In Clintonville and other historic Columbus neighborhoods, Trane air handlers connected to original galvanized ducts often run with high static pressure due to interior rust flaking and debris buildup. That causes reduced airflow and coil freeze-up in summer, and the rust particles circulate through the home. Our negative-air cleaning removes the debris and we seal rusted seams with mastic.
- Kinked and sagging flex duct. In Dublin, Westerville, and Pickerington, Trane systems frequently suffer from kinked or sagging flex runs installed too tightly. The result: hot rooms, uneven temperatures, and premature blower motor wear as the Trane unit works against restricted airflow. We identify the kinks during cleaning and correct the runs where accessible.
- Biological growth on Trane cased coils. Columbus’s humid summers mean Trane cased coils are prone to biological growth when return ducts pull in unconditioned crawlspace or attic air. Homeowners notice a musty odor and diminished cooling capacity. We clean the evaporator coil and seal the return path so unconditioned air stays out.
- Dirty blower wheels on older Trane furnaces. Older Trane furnaces with PSC blower motors in city homes often have dirty blower wheels that throw off balance, creating vibration and noise that homeowners mistake for a failing motor. We clean and rebalance the blower wheel before recommending any motor replacement.
- High static pressure from decades of debris. In pre-1950 Columbus homes, ducts that have never been properly cleaned carry decades of construction debris, pet hair, and fine dust. Trane systems, especially variable-speed models like the XV18 and XV20i, are sensitive to static pressure. Cleaning returns the system to normal operating range.
Trane Service in Columbus: What Local Conditions Mean for Your Equipment
In Clintonville’s pre-1950 homes, the original galvanized ducts serving Trane systems often develop internal condensation during AC season. That condensation rusts the duct walls from the inside, and every time the blower starts, it pushes a distinct musty odor through the registers. This problem is virtually unseen in Columbus’s newer suburbs with sealed flex duct, which is why a Dublin homeowner with the same Trane unit may never experience it. What it means for Trane owners specifically: the rust particles and microbial growth inside those old ducts increase static pressure, which forces variable-speed Trane systems to work harder and shortens blower motor life. Cleaning the ducts and sealing the rusted seams with mastic restores proper airflow and eliminates the odor at the source. If you live in a historic Columbus home and notice that smell when the AC cycles on, it’s not a dirty filter. It’s the ductwork, and it’s fixable.
Trane Models & Products We Service in Columbus
We service the full Trane product line across Columbus: XR series air conditioners and heat pumps (XR13, XR14, XR16), XB series builder-grade units (XB13, XB14), XV series variable-speed systems (XV18, XV20i), and S-Series and T-Series furnaces and air handlers. For parts, we use OEM Trane components when they are available and cost-effective. For common wear items like blower wheels, capacitors, and door gaskets, we source high-quality aftermarket equivalents that meet or exceed OEM specs. We stock the common components for older Trane furnaces that are still everywhere in Columbus’s historic neighborhoods, which means faster turnaround when a capacitor fails in July. And we give an honest repair-versus-replace recommendation: if a Trane unit is over 15 years old and has a failed compressor or heat exchanger, we’ll tell you when replacement makes more sense than a costly repair.
Trane Service Pricing in Columbus
Trane air duct cleaning in Columbus runs $285 to $520 for a whole-home system, depending on the number of returns, accessibility of the duct runs, and how much debris has accumulated. A single-system home with accessible ducts sits at the lower end. A two-story home with basement and attic runs, or a system that has never been cleaned, sits at the higher end. Evaporator coil cleaning adds $150 to $225. Duct sealing with mastic runs $3 to $5 per linear foot for accessible runs. Our estimates are free, and the price we write down before work starts is the price you pay. No per-vent math, no balloon once the technician is inside. Call (361) 326-5060 for an exact quote on your Trane system.
Serving Columbus, OH - Our Local Coverage Area
We’re based in the Columbus area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Columbus
The smell comes from internal condensation rusting your original galvanized ducts from the inside, which releases rust particles and microbial growth every time the blower starts. This is specific to older Columbus homes with original ductwork, and it is not something you’ll find in newer suburban builds. We clean the system, seal the rusted seams with mastic, and the odor goes away. Call (361) 326-5060 to schedule a video inspection.
Yes. Flex duct in Dublin and Westerville is often installed with kinks and tight bends that restrict airflow to your Trane air handler. We clean the flex runs with a rotary brush system and identify kinks or sags that need correction, and we also offer Dryer Vent Cleaning - Columbus for homes in the area. The cleaning removes dust accumulation, and correcting the runs improves airflow and reduces blower motor strain.
Every four to six years for most Columbus homes. If you have a historic home with galvanized ducts in Clintonville or Olde Towne East, or if you have pets, allergies, or a recent renovation, every three to four years is smarter. Columbus’s humid summers mean your Trane system cycles heavily, pulling in pollen and mold spores that accumulate faster than in drier climates.
No. Duct cleaning does not void a Trane manufacturer warranty. We use negative-air cleaning methods that protect your Trane equipment, and we never use chemicals or sealants that could damage components. If a warranty claim ever comes up, our work documentation and before-and-after video can support it.
Yes. Variable-speed Trane systems like the XV20i are more sensitive to static pressure, so dirty ducts affect them more than older fixed-speed units. We take static pressure readings before and after cleaning on variable-speed systems, and we’re careful to clean without leaving debris that could unbalance the blower. The process is the same, but the verification step is more thorough.
Service Areas Near Columbus
We serve the entire Columbus metro area, including Clintonville, the Short North, Olde Towne East, Dublin, Westerville, and Pickerington. Our Columbus service area coverage extends to all surrounding neighborhoods. We also provide Trane service in San Francisco and Trane service in Seattle through our partner locations.
Book Your Trane Service in Columbus Today
If your Trane system is pushing musty air through old Columbus ductwork, or if certain rooms never seem to cool properly, call (361) 326-5060 for a free estimate. We answer the phone with a live person, we show up when we said we would, and the price is in writing before any work starts. Clean ducts, straight answers, that’s the whole job.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Columbus since 2004.