Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Temescal Valley
Duct sealing in Temescal Valley typically runs $450 – $1,200 for a whole-home system, and most jobs are completed in a single scheduled visit. We’re the Duct Sealing team at Hollis Air Duct Cleaning, and we’ve been working in Temescal Valley’s master-planned communities long enough to know what builder-installed flex duct looks like after a few summers in a 140°F attic. If you’re seeing white dust on your registers or rooms that never cool evenly, the problem usually starts with ductwork that was never properly sealed at construction. Call us at (361) 326-5060 for a free estimate. Scheduling is coordinated from our Los Angeles office, and our crews serve Temescal Valley locally.
Why Hollis Air Duct Cleaning Is Temescal Valley’s Preferred Duct Sealing Company
We’ve been in business since 2004 as part of the Garrison Partners family, and our Temescal Valley customers know we show up inside the quoted window, price the job in writing before we touch anything, and leave the site clean. That’s The Garrison Standard, and it’s how every Hollis location operates, independently owned and operated.
Our technicians are background-checked and uniformed. You know who’s walking into your home before they arrive. The price we write down is the price you pay. No estimates that balloon once we’re inside.
Every repair we make carries our 365-Day Done Right Promise. If the work fails within a year, we come back and make it right at no charge, including a free second visit. That’s not a satisfaction guarantee; it’s a written commitment on every job.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues, no waiting until Monday.
Duct Sealing Services in Temescal Valley
Duct Sealing Services in Temescal Valley address a problem most homeowners don’t expect in a newer house: builder-installed flexible ductwork that was never properly sealed at the joints, boots, and trunk connections, leaving conditioned air leaking into 140°F attics while drawing construction dust back into the living space. Because Temescal Valley’s tract homes are less than 25 years old and have never been through a major remodel, duct sealing here is almost always a first-time service on builder-installed flexible duct – meaning we’re sealing gypsum and silica construction dust into a system that was never properly cleaned at handover, rather than replacing a deteriorated legacy system. A typical whole-home duct sealing job in Temescal Valley runs $450 – $1,200 depending on system size and accessibility.
Boot-to-Floor and Trunk Joint Sealing
The metal collar where your duct boot meets the floor or ceiling is a common leak point in Temescal Valley homes. We apply mastic sealant and reinforced foil tape at these junctions, then pressure-test to verify the seal holds. This stops the conditioned air you’re paying for from bleeding into the attic.
Flex Duct Repair and Replacement
In Terramor and The Retreat, we’ve found builder-installed flex duct sagging between rafters, its inner liner torn from years of heat cycling. Sealing over damaged flex is a waste of money. We inspect with a camera first, replace torn sections with new insulated flex, then seal the connections properly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Duct Insulation in Temescal Valley
Duct Insulation in Temescal Valley is often the missing piece in homes where the builder met code minimums but nothing more. Flexible duct in 140°F attics loses capacity fast when its insulation jacket is compressed, damaged, or inadequate from the start. We install fresh insulation wraps or replace under-insulated flex runs entirely, typically adding $200 – $500 to a sealing job when needed. Most Temescal Valley homeowners call us about hot rooms or high summer electric bills; the duct is delivering air, but it’s heating up before it reaches the register.
Attic Duct Insulation Upgrades
We use insulation products from Guardsman and Abatement Technologies rated for the temperature swings Temescal Valley attics see. The work takes a few hours, and we photograph before and after so you can see what was covered.
Return Plenum Sealing and Wrapping
The return plenum at your air handler is a critical leak point. In Temescal Valley’s newer homes, we’ve found gaps at the plenum floor where the builder’s crew rushed the connection. We seal with mastic, then wrap with fresh insulation to prevent heat gain on the suction side.
Trusted Brands We Service in Temescal Valley
Our equipment roster includes Rotobrush rotary brush systems and Nikro negative-air machines for source removal, plus sealing and insulation products from Abatement Technologies and Guardsman. We stock common flex duct sizes, mastic, and foil tape so Temescal Valley jobs don’t wait on parts. For filtration upgrades after sealing, we carry Honeywell and Aprilaire products. These are the same tools commercial crews use, and we’ll explain what each one does while we’re working.
Common Duct Sealing Problems We See in Temescal Valley Homes
- Sealing over construction dust before source removal. Some crews skip the cleaning step and seal joints full of gypsum and silica dust. The sealant cures, but the dust keeps shedding onto your registers for years. We remove the debris first under negative pressure with HEPA filtration, then seal.
- Mastic applied to heat-degraded flex duct. In Temescal Valley’s 140°F attics, the inner liner of builder-grade flex duct tears and degrades. Sealing over it hides the damage for a season, then the seal fails when the liner keeps shedding. We camera-inspect every run and replace torn sections before sealing.
- Missing hidden leaks at the air handler plenum. The boot gaps at the return plenum and the leaks on the suction side pull attic dust directly through your blower motor. These aren’t visible from the living space. We inspect with a camera and seal what others miss.
- Santa Ana wind infiltration through unsealed returns. When Santa Ana winds drive dust through Temescal Valley, leaky return ducts in the attic pull that particulate straight into your system. Sealing the return side is as important as sealing the supply side, and many crews skip it.
Pricing for Duct Sealing in Temescal Valley, CA
A typical whole-home duct sealing in Temescal Valley runs $450 – $1,200. Smaller single-story homes near the Terramor entrance tend toward the lower end. Two-story homes in The Retreat with longer duct runs and more attic access complexity run higher. Duct insulation upgrades add $200 – $500. We give you one flat price per system, agreed in writing before any work starts. No per-vent pricing, no add-ons at the door. What we write down is what you pay. Call (361) 326-5060 for an exact quote on your home. Estimates are free, and we bring a camera so you see what we see.
We Also Serve Cities Near Temescal Valley
Hollis Air Duct Cleaning provides Duct Sealing in Temescal Valley and surrounding areas. We also schedule work in Los Angeles, San Diego, San Jose, and San Francisco. Each location operates independently under The Garrison Standard.
Serving Temescal Valley, CA - Our Local Coverage Area
We’re based in the Temescal Valley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Temescal Valley
Yes. Most Temescal Valley homes built during the 2000s – 2010s boom were handed over with construction debris in the ducts and joints that were never properly sealed. The age of the house doesn’t matter if the builder skipped the step. Call (361) 326-5060 and we’ll camera-inspect to show you what’s actually in there.
The white dust is gypsum and silica construction debris left by builders, now circulating through your system because the ducts were never cleaned and sealed properly at handover. In Temescal Valley’s climate, Santa Ana winds pull additional dust into leaky returns, and the 140°F attic heat degrades flex duct liners that then shed particles. We remove the source, then seal the leaks so it stops.
It helps significantly. Sealing the return side of your duct system prevents the negative pressure in your attic from pulling windborne dust directly into your blower motor path. In Temescal Valley, where Santa Ana events are regular and severe, this is often the single most effective step after source removal. Call (361) 326-5060 for a free estimate.
Yes, and we use materials rated for those temperatures. The real issue in Temescal Valley attics isn’t the sealing itself; it’s that the extreme heat has already degraded builder-grade flex duct inner liners. We replace torn sections with new insulated flex rated for the environment, then seal the connections with mastic and reinforced tape that holds up to the thermal cycling.
Duct cleaning removes the construction debris and dust. Duct sealing closes the gaps and leaks so that debris stops circulating and conditioned air stops escaping into the attic. In a typical Temescal Valley tract home, you need both: cleaning first, then sealing. Sealing over dirty ducts traps the problem inside; cleaning without sealing leaves the leaks that let new dust in and drive up your electric bill. Call (361) 326-5060 and we’ll price both steps together with one flat written quote.
In Terramor, a homeowner called us after noticing a fine white dust settling on every register in a 2017-built home – the giveaway was the chalky residue on the air handler’s filter frame. We ran camera inspection on the supply and return ducts, found the builder had left flex runs sagging in the 140°F attic with torn inner liners shedding particles, and after source removal under negative pressure with HEPA filtration, we sealed the boot-to-floor and trunk joints that were leaking conditioned air into the attic. The dust on the registers stopped within days, and the homeowner finally stopped asking whether the builder was going to come back and fix it.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Temescal Valley since 2004.