Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Palm Springs
Duct sealing in Palm Springs typically runs $400 – $900 for a whole-home system, with most jobs completed in a single visit after a written price is agreed on site. If you’re tired of sand blowing from your registers or rooms that never cool evenly, sealing the gaps in your ductwork stops conditioned air from escaping into your attic or crawlspace before it reaches your living space. Call Hollis Air Duct Cleaning at (361) 326-5060 for a free estimate – we’ll inspect your system, show you what we find, and lock in the price before any work starts.
We’ve been serving Palm Springs homeowners since 2004 as part of the Garrison Partners family, dispatching crews from our Inland Empire office to homes from Vista Las Palmas to Deepwell. Palm Springs isn’t a generic desert market to us. The mid-century modern homes here – flat roofs, rigid metal duct runs, decades of haboob-driven sand accumulation – present sealing challenges you won’t find in tract-home subdivisions. Our technicians arrive uniformed, background-checked, and equipped with professional-grade tools from Rotobrush and Nikro. The price is written down before we touch anything. That’s The Garrison Standard.
Why Hollis Air Duct Cleaning Is Palm Springs’s Preferred Duct Sealing Company
Hollis has built its reputation in Palm Springs on showing up when we said we would and leaving the site clean. We don’t compete on teaser coupons or per-vent pricing that balloons once the van is in your driveway. Every job gets a written price upfront and is backed by our 365-Day Done Right Promise – if the seal fails or the problem returns within a year, we come back and make it right at no charge, including a free second visit.
Our Palm Springs customers call us back because we explain what we found in plain terms. A crushed run in a 1960s flat-roof attic. A trunk fitting that popped loose during a windstorm. Sand scoured into a seam until the mastic turned to dust. We use camera inspection so you see it, not just hear about it. Then we seal it with materials rated for 110°F+ attic heat, not hardware-store tape that cracks in a season.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues. When you schedule Duct Sealing in Palm Springs, you’re talking to someone who can dispatch a crew, not a call center reading a script.
Duct Repair in Palm Springs
Duct Repair in Palm Springs means fixing the physical damage that sealing alone won’t solve: disconnected trunk fittings, crushed flexible runs, corroded metal seams, and blower compartments packed with sand. In the Coachella Valley’s older homes, we regularly find supply and return ducts that have separated at the joints after decades of thermal cycling between 110°F attic heat and 55°F conditioned air. A typical duct repair in Palm Springs runs $250 – $600 depending on accessibility and whether we’re reconnecting one fitting or replacing a damaged section.
Disconnected and Crushed Runs
Flat-roof mid-century homes in Palm Springs often have short, exposed duct runs in crawlspaces or attics that get stepped on during roofing work or sag under their own weight. We reconnect or replace the damaged section, then seal the joints with mastic rated for desert temperature swings. A disconnected return duct in a Palm Springs attic doesn’t just leak – it pulls 140°F air straight into your system, spiking your electric bill.
Blower Motor and Plenum Damage
After major wind events, we find sand packed around blower motors and inside plenum boxes until the motor overheats or the wheel goes out of balance. Cleaning without repair is temporary. We remove the blower assembly, clean it under negative pressure with HEPA filtration, and reseal the plenum to the air handler so sand stops entering at the source.
Air Duct Sealing in Palm Springs
Our Duct Sealing in Palm Springs closes the gaps, seams, and joints where conditioned air escapes and unfiltered desert air enters your duct system. Most Palm Springs homes lose 20 – 30% of their conditioned air through leaks before it reaches the rooms. In a climate where your AC runs eight months a year, that’s hundreds of dollars in wasted electricity. A typical whole-home air duct sealing in Palm Springs costs $400 – $900, with larger homes or systems requiring extensive mastic work at the higher end.
Mastic Sealing for Metal Ductwork
The rigid metal ducts in Palm Springs’s mid-century homes need water-based duct mastic applied with a brush or spray at every seam, joint, and fitting. We use Abatement Technologies filtration and Nikro negative-air machines to maintain pressure while we work, so no sand gets pushed into your living space during the process. Tape alone won’t survive here. The thermal cycling cracks adhesive-backed products within months.
Register and Boot Sealing
Supply registers in Palm Springs homes often show “dust dunes” where air leaks around the boot behind the wall. We seal the boot-to-drywall joint and the duct-to-boot connection, then verify with a smoke pencil or pressure test. It’s a small detail that stops both air loss and the fine grit that slips through gaps too narrow to see.
Trusted Brands We Service in Palm Springs
Hollis stocks parts and sealing materials from Rotobrush, Nikro, and Abatement Technologies – the same equipment commercial crews use in hospitals and schools, not hardware-store consumables that degrade in desert heat. For filtration and air quality upgrades after sealing, we carry Honeywell, Aprilaire, and Guardsman products. Our Inland Empire warehouse keeps common fittings, mastic compounds, and metal repair sleeves in stock, so most Palm Springs jobs don’t wait on parts. When we find a crushed 10-inch rigid trunk in a Movie Colony attic, we replace it with matching gauge metal and seal it same-day.
Common Duct Sealing Problems We See in Palm Springs Homes
- Sand-scoured seams in original metal trunks. Decades of haboob-driven grit flowing through rigid ductwork erodes the factory mastic at joints and fittings. Sealing only the registers leaves these trunk leaks wide open, so fine dust keeps entering the supply stream.
- Thermal cycling damage from extreme attic heat. Palm Springs attics hit 140°F in summer. Ducts cool to 55°F when the AC runs. That daily expansion and contraction pops sealed joints within a season if the wrong materials or methods were used.
- Disconnected runs discovered during cleaning. We often find supply or return ducts that have separated entirely in older homes, with the homeowner unaware because conditioned air is simply dumping into the crawlspace. Sealing around a broken fitting traps sand inside and wastes energy.
- Flat-roof penetrations and compromised insulation. Mid-century flat roofs in Vista Las Palmas create unique access points where ducts penetrate the roof structure. Wind-driven sand enters at these points, and the original flashing or sealant has often hardened and cracked after sixty years.
Pricing for Duct Sealing in Palm Springs, CA
A typical duct sealing job in Palm Springs runs $400 – $900 for a whole-home system. Single repairs or partial sealing of accessible trunk lines start around $250. What moves the price: the linear feet of ductwork, whether we need to access a flat-roof attic or tight crawlspace, the condition of existing joints (sand-scoured metal requires more prep than intact seams), and whether we discover disconnected or crushed runs that need repair before sealing.
We don’t quote per-vent or over the phone. Every Palm Springs home is different, especially the mid-century stock with original metalwork. Our technician inspects your system, shows you camera footage of what we found, and writes the price on the estimate form before any work begins. That number doesn’t change at the door. Estimates are free. Call (361) 326-5060 to schedule.
We Also Serve Cities Near Palm Springs
Hollis crews work throughout the Coachella Valley, including Palm Springs, Cathedral City, Desert Hot Springs, Rancho Mirage, and Thousand Palms. The same written pricing, background-checked technicians, and 365-Day Done Right Promise apply in every community we serve.
Serving Palm Springs, CA - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Palm Springs
Cleaning removes the sand and dust that’s already inside; sealing stops new contamination from entering through gaps and disconnected joints. For ongoing protection, consider our Dryer Vent Cleaning in Palm Springs as part of your maintenance routine. In Palm Springs’s older homes, we’ve cleaned ducts that were packed with sand again within two seasons because the trunk seams were never sealed – the haboobs just kept delivering fresh material through the leaks.
Yes, if the sand is entering through leaks in your duct system rather than through your return air filter. After a major wind event, we often find sand piled in returns and coating blower motors because the ductwork pulls unfiltered attic or crawlspace air through gaps. Sealing those entry points, combined with proper filtration, stops the register dust. Call (361) 326-5060 and we’ll trace the source.
Usually, yes. Rigid metal ductwork from the 1950s is often thicker-gauge and better-constructed than modern flex-duct alternatives. We clean the interior under negative pressure, inspect with a camera for corrosion or structural damage, then seal all joints with mastic rated for desert thermal cycling. Replacement becomes necessary only when metal is rusted through or crushed beyond repair – and we’ll show you that footage before recommending it.
Low humidity makes dust particles finer and more easily suspended, so leaks pull more airborne material into your system. More critically, the extreme temperature swings between 110°F+ attic heat and cool supply air cause sealant materials to expand and contract aggressively. We use mastic compounds specifically rated for these conditions, not standard tapes that crack and fail within a season in Palm Springs homes.
We seal and repair dryer vents as a separate service. Dryer vent sealing in Palm Springs addresses disconnected runs, improper terminations, and gaps where the vent passes through walls or roofs – critical in a climate where lint buildup combined with 110°F heat creates genuine fire risk. Our Duct Sealing team can inspect both systems during the same visit and quote each separately.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Palm Springs since 2004.




Before
After
Before
After
Before
After