Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Monroe
We seal ducts in Monroe homes where winter dampness and summer humidity push unconditioned attics and crawlspaces past dew point most of the year. If your registers blow musty air or your back bedrooms never warm up, the problem is usually gaps, crushed runs, or rodent debris in the duct system itself – not your HVAC unit. Our Duct Sealing team dispatches from our Atlanta office and serves Monroe homeowners with the same written pricing and 365-Day Done Right Promise we honor everywhere in Walton County. Call (361) 326-5060 for a free estimate.
Why Hollis Air Duct Cleaning Is Monroe’s Preferred Duct Sealing Company
We’ve worked in Monroe long enough to know the difference between a 1978 ranch near the fairgrounds with original rigid duct and a 2005 Fryelands build with sagging flex runs that collect condensation every January. That local knowledge matters because sealing the wrong problem – or sealing over wet, mold-laden flex – makes the musty smell worse, not better.
Our technicians are background-checked, uniformed, and trained to The Garrison Code: arrive inside the quoted window, price the job in writing before touching anything, and leave the site clean. Every repair carries our 365-Day Done Right Promise in writing. If the seal fails or the odor returns within a year, we come back at no charge, including a free second visit.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues.
Air Duct Sealing in Monroe
Air Duct Sealing in Monroe means closing the gaps, reconnecting separated joints, and replacing crushed or rodent-damaged flex duct in a climate where 40 inches of annual rain keeps attic humidity high year-round. The job is not a surface spray. We use mastic sealant and mechanical fasteners on accessible joints, replace damaged flex with properly supported runs, and verify airflow balance at the registers before we leave. A typical whole-system sealing job in Monroe runs $850 – $1,800 depending on accessibility, the amount of damaged flex to replace, and whether we need to clean debris from the return-air plenum first.
What We Seal and What We Replace
We seal metal duct joints and plenum connections with mastic, not duct tape, because tape dries and peels in hot attics. When we find flex duct crushed under insulation or chewed by rodents, we cut it out and run new supported flex with proper sag limits. Sealing over damaged material traps moisture and guarantees a callback.
Camera Inspection Before We Quote
We run a camera through the return and supply trunks so you see what we see – crushed runs, gaps at the air handler, rodent debris, or standing condensation. The camera footage becomes part of your written quote. No surprises at the door.
Duct Sealing Services in Monroe
Duct Sealing Services in Monroe address the specific failure modes this valley climate creates: condensation in unconditioned attics, mold-spore-laden flex that should not be sealed until it is cleaned or replaced, and rodent nests in return plenums that recontaminate the whole system. Our process starts with inspection, moves to source removal of debris and microbial growth, then seals and replaces only what the system actually needs. Most Monroe homeowners pay between $850 and $1,800 for a complete sealing job, with smaller partial repairs starting around $400.
Negative-Air Cleaning With HEPA Filtration
Before we seal any duct that has held moisture or debris, we agitate and extract under negative air pressure using Nikro equipment with HEPA filtration. This pulls particulate out of the system rather than pushing it into your living space. We explain the process while we work.

Written Price, Written Guarantee
The price is written down before any work starts. It does not move. The 365-Day Done Right Promise covers every seal, every connection, every replaced run for a full year. If it fails, we return and make it right at no charge.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Monroe
We stock parts and filtration products from Honeywell, Aprilaire, and Abatement Technologies so Monroe homeowners are not waiting on shipping for common repairs. Our equipment roster includes Nikro negative-air machines and Rotobrush rotary systems – the same tools commercial crews use, maintained to manufacturer spec. When we seal a system, we use mastic and mechanical fasteners rated for the temperature swings your attic sees in July and January. Fast turnaround on parts means most Monroe jobs finish in one visit.
Common Duct Sealing Problems We See in Monroe Homes
- Condensation-soaked flex in unconditioned attics. Monroe’s wet marine climate keeps attic humidity above 70 percent through winter. Flex duct that touches roof decking or lies in insulation condenses on the outside, then wicks mold spores inside. Sealing over this without drying and source-removal traps the moisture and the musty smell returns by March.
- Crushed supply runs under blown-in insulation. In 1970s – 90s valley-floor homes near downtown and the fairgrounds, installers often buried flex duct in attic insulation. Over decades the weight flattens the run. Airflow drops. Back bedrooms go cold. A fogging “sanitiser” never fixes this.
- Sagging flex in Fryelands and Ridge-area builds. Newer Monroe subdivisions used longer flex runs with inadequate support straps. Low points collect dust and condensation. We replace these with properly supported runs pitched for drainage.
- Rodent nests in return-air plenums. After fall leaf drop, field mice move off the Snoqualmie River corridor into 1980s valley-floor homes. We find nests and insulation debris in return plenums that recontaminate sealed ducts within weeks if not removed.
Pricing for Duct Sealing in Monroe, GA
A typical whole-system duct sealing job in Monroe runs $850 – $1,800. Partial repairs – sealing accessible joints at the air handler and replacing one or two crushed flex runs – start around $400. What moves the price: how much of the ductwork we can reach without cutting drywall, how many rodent-damaged runs need replacement, whether the return plenum needs debris removal first, and if the flex duct is wet or mold-laden and requires pre-cleaning.
We do not quote per-vent pricing. We price per system, agreed in writing before work starts. Every quote includes a camera inspection so you see the condition of your ducts before deciding. Estimates are free. Call (361) 326-5060 to schedule.
We Also Serve Cities Near Monroe
Our crews work throughout Walton County and into neighboring communities. We regularly seal ducts in Monroe plus Social Circle, Loganville, Grayson, and Dacula. Scheduling is coordinated from our Atlanta office, and we route technicians to minimize drive time to your job.
Serving Monroe, GA - Our Local Coverage Area
We’re based in the Monroe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Monroe
Monroe averages roughly 40 inches of rain annually and sits in the Skykomish/Snoqualmie river valley, so ducts in unconditioned attics and crawlspaces hit dew point constantly in winter. Condensation on flex duct wicks mold spores and organic material into the airstream. Dry-climate cities rarely see this sustained humidity. Call (361) 326-5060 if you smell musty air at your registers – we will camera-inspect and quote free.
No. A fogging treatment coats the interior surface but does not remove the source material, does not dry wet flex duct, and does not seal the gaps that let humid attic air in. In Monroe’s climate, the moisture returns and the mold grows back. We remove debris and moisture first, then seal. Call (361) 326-5060 for an inspection that shows what is actually in your ducts.
Crushed flex creates low points where dust and condensation collect, and no amount of sealant at the joints fixes a flattened run. In Fryelands and Ridge builds, we often find 25-foot flex spans with inadequate support straps that have sagged over time. We cut out the damaged section and run new, properly supported flex before sealing the connections. Call (361) 326-5060 for a camera inspection.
Field mice move inland from the Snoqualmie River corridor after fall leaf drop, and the return-air plenum of a 1980s Monroe home is often the warmest, most sheltered entry point. These plenums are rarely inspected during routine HVAC service. We check them on every sealing job and remove nests and debris with agitation tools under negative-air HEPA filtration before sealing. Call (361) 326-5060 to schedule.
Worth paying for: camera inspection, source removal of debris and moisture, mastic sealing of metal joints, replacement of crushed or damaged flex with properly supported runs, and a written one-year guarantee. Not worth paying for: fogging “sanitiser” that does not remove source material, per-vent pricing that balloons at the door, or sealing over wet duct without drying it first. We quote one flat price per system, in writing, before work starts. Call (361) 326-5060 for a free estimate.
Ready to stop the musty air and cold back bedrooms? Call Hollis Air Duct Cleaning at (361) 326-5060 for a free duct sealing estimate in Monroe. We will camera-inspect your system, show you what we find, and give you a written price that does not change. Every job is backed by our 365-Day Done Right Promise – if the seal fails or the odor returns, we come back and make it right at no charge.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Monroe since 2004.




Before
After
Before
After
Before
After