Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Hicksville
Duct sealing in Hicksville typically runs $800 – $2,400 for a whole-home job, depending on whether we’re sealing accessible trunk lines or chasing down disconnected branch runs behind finished basement walls. Most Hicksville homes we work on are 1950s – 60s Levitt ranches and Cape Cods with original sheet-metal ductwork, and the sealing work usually takes one day with the crew arriving inside the quoted window.
We’re familiar with Hicksville’s housing stock from the Levittown border down to the Broadway corridor and the neighborhoods near the Hicksville LIRR station. Our dispatch is coordinated from our New York City office, but the crew that shows up at your door knows these houses: the single forced-air trunk lines, the basements that have been finished over original duct runs, the second-floor additions on Cape Cods that never got adequate airflow. When you call (361) 326-5060, a live person answers, and we’ll give you a written price before any work starts.
Why Hollis Air Duct Cleaning Is Hicksville’s Preferred Duct Sealing Company
Hollis Air Duct Cleaning has been part of the Garrison Partners family since 2004, and our Duct Sealing team has built a reputation in Hicksville by doing what we say we’ll do. The Garrison Standard means arriving inside the window, pricing in writing, completing the job by the book, and leaving the site clean. No estimates that balloon once the technician is inside.
Our technicians are background-checked and uniformed, and every job carries the 365-Day Done Right Promise in writing. If the sealing fails within a year, we come back and make it right at no charge, including a free second visit. That promise matters in Hicksville, where the real problem is often hidden behind a finished basement wall or above a dropped ceiling, and the first fix doesn’t always expose every leak.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues, no waiting until Monday to schedule.
Duct Sealing Services in Hicksville
Duct Sealing Services in Hicksville address a specific problem: the forced-air systems in most local homes were designed for oil furnaces, and when those systems are converted to natural gas or replaced with high-efficiency units, the existing trunk and branch ducts are often undersized for the new airflow pattern. Sealing isn’t just about closing leaks. It’s about re-balancing a system so heated and cooled air reaches every room it was meant to serve.
A typical whole-home duct sealing job in Hicksville runs $800 – $2,400. Smaller jobs focused on accessible trunk lines in an unfinished basement start around $400 – $700. We use professional-grade mastic and foil tape, applied after source removal and negative pressure cleaning with our Nikro equipment, so we’re sealing clean metal, not trapping decades of dust and renovation debris inside.
Leak Detection and Pressure Testing
We pressurize the duct system and measure total airflow loss before touching anything. This gives us a baseline and shows whether the problem is at accessible joints or hidden behind finished walls. In Hicksville’s older capes, we often find 25 – 40% airflow loss from disconnected branch runs alone.
Mastic Sealing of Sheet-Metal Joints
Original 1950s sheet-metal ducts in Hicksville homes were assembled with snap-lock seams and minimal sealing. We brush on water-based mastic, a thick sealant that remains flexible and won’t dry out like tape. On oil-era trunk lines, this is often the difference between heat that reaches the register and heat that leaks into the basement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Duct Insulation in Hicksville
Duct Insulation in Hicksville matters because Long Island’s humid summers and cold winters force HVAC systems to run hard, and uninsulated ducts in basements and crawl spaces lose temperature fast. In Hicksville’s mid-century homes, the original sheet-metal trunk line often runs through an unconditioned basement with no insulation at all, so you’re paying to heat or cool air that warms or cools again before it reaches your living space.
Duct insulation in Hicksville typically costs $600 – $1,800 for a whole-home job, depending on linear footage and accessibility. We use foil-faced fiberglass wrap or closed-cell foam where space is tight, installed after sealing is complete so insulation doesn’t trap air leaks inside. The combination of sealing plus insulation can reduce HVAC runtime by 15 – 25% in these older homes.
Basement Trunk Line Wrapping
The single trunk line in a Hicksville Levitt ranch often runs the full length of an unfinished basement. We wrap this with R-6 or R-8 insulation, sealed at all seams, so conditioned air maintains temperature from the air handler to the farthest register. This is especially effective for homes that have converted from oil to gas and now run longer cycles at lower temperature.
Crawl Space and Chase Insulation
Some Hicksville capes have duct runs through exterior wall chases or shallow crawl spaces. These are the hardest to access and the most prone to condensation and mold in humid weather. We use closed-cell foam in tight chases where fiberglass won’t stay in place, and we always check for existing leaks before insulating, since trapped moisture is worse than no insulation at all.
Trusted Brands We Service in Hicksville
Our equipment comes from Nikro, Honeywell, and Aprilaire, the same brands commercial crews use on larger buildings. We stock sealing mastic, foil tape, and insulation materials sized for residential ductwork, so most Hicksville jobs don’t wait on parts. Our Nikro negative-air machines pull 2,000 CFM, enough to maintain proper containment during cleaning and sealing in a full-sized home. For filtration upgrades after sealing, we carry Honeywell and Aprilaire media filters that fit standard return grilles in Levitt-era construction without modification.
Common Duct Sealing Problems We See in Hicksville Homes
- Crushed branch runs behind finished basement walls. On a Cape Cod off the Broadway corridor near the Hicksville LIRR station, a homeowner complained that the second-floor bedrooms never got warm. Our tech ran a camera inspection through the supply and return ducts and found a crushed branch run behind a finished basement wall, plus disconnected joints at the original sheet-metal trunk. After sealing the leaks and reconnecting the run, airflow at the upstairs registers evened out and the blower motor stopped short-cycling.
- Sealing without cleaning first. Using mastic or tape on original 1950s sheet-metal ducts without first performing source removal and negative pressure cleaning traps dust and renovation debris inside. The seal fails within a season when the mastic can’t adhere to greasy or particulate-coated metal.
- Ignoring total static pressure when sealing. A system resized for oil heat but now on gas can be starved for return air. Sealing supply leaks without checking whether the blower motor can handle the new resistance profile actually makes uneven distribution worse in some Hicksville homes we’ve diagnosed.
- Skipping the air handler cabinet and plenum. The sheet-metal box that connects your furnace to the trunk line often has the largest leaks in the system, especially where filter racks have been modified or bypass doors installed. We seal these with the same mastic we use on duct joints, not hardware-store tape that dries and falls off.
Pricing for Duct Sealing in Hicksville, NY
Whole-home duct sealing in Hicksville runs $800 – $2,400. Partial sealing of accessible basement trunk lines starts at $400 – $700. Duct insulation adds $600 – $1,800 depending on linear footage. These are whole-system prices, not per-vent teaser rates that balloon once the van is in your driveway.
What moves the price: accessibility (finished basements take longer), the extent of disconnected or crushed runs we find, and whether we need to cut access panels to reach hidden joints. We give you a written price before any work starts, and that price does not move at the door. Every job includes before-and-after photos of your own ducts, so you see what was sealed and why.
Call (361) 326-5060 for a free estimate. We’ll inspect the system, pressurize it for leakage, and give you a written quote you can compare without pressure.
We Also Serve Cities Near Hicksville
Our crews work throughout central Nassau County, including Hicksville and the surrounding communities of Levittown, Hempstead, Freeport, and Long Beach. The same Garrison Standard applies in every town: written price, written guarantee, background-checked uniformed technicians, and the 365-Day Done Right Promise backed in writing.
Serving Hicksville, NY - Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Hicksville
Original sheet-metal ducts in Hicksville ranches can almost always be sealed successfully if the metal itself is intact and not rusted through. We clean them first with our Nikro negative-air system, then seal joints with mastic and reinforce with foil tape. Replacement is only necessary when sections are crushed, disconnected beyond repair, or corroded. Call (361) 326-5060 and we’ll camera-inspect to give you a straight answer on condition.
The second-floor ducts in Hicksville Cape Cods were often added later without resizing the trunk line or blower motor for the additional airflow demand. Cleaning removes debris, but if the branch run is crushed behind a finished basement wall or disconnected at the trunk, no amount of vacuuming fixes the airflow. We pressure-test the system to find the real restriction, then seal and reconnect as needed. The fix is usually sealing and balancing, not more cleaning.
Basement conversions in the LIRR corridor often disturb original duct runs that weren’t designed to be enclosed in finished walls. Construction dust enters the system through temporary openings, and sheet-metal joints that were accessible for decades are now buried behind drywall. We recommend source removal cleaning first, then camera inspection to verify no ducts were crushed during framing, then sealing all accessible joints before they get covered. Doing this in the right order prevents sealing debris inside permanently.
Yes, and in some ways it matters more. Oil furnaces run at higher stack temperatures and move less air volume than gas conversions, so every cubic foot of heated air that leaks into the basement is air that never reached your living space. Sealing trunk lines and plenum joints can improve delivery temperature at registers by 10 – 15 degrees in these systems. When you do convert to gas later, the sealed ductwork performs better with the new equipment’s airflow profile.
Cleaning fixes contamination: dust, debris, mold, construction residue. Sealing fixes distribution: rooms that never reach temperature, short-cycling blowers, high utility bills despite reasonable equipment. We check both on every visit. If your registers show good airflow but blow dirty air, you need cleaning. If they’re clean but weak, or strong in some rooms and absent in others, you need sealing and possibly rebalancing. Our pressure test shows the difference in about ten minutes. Call (361) 326-5060 to schedule.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Hicksville since 2004.