Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Sealing Across Eastmont
We seal ducts in Eastmont homes where the real problem isn’t always the leak you can hear, it’s the crushed flex run behind the air handler that no homeowner can see. If you’re in the Silver Lake area or anywhere in Eastmont’s 1980s – 2000s housing stock, call us at (361) 326-5060 for a free estimate. Our dispatch is coordinated from the Seattle office, and our crews serve Eastmont directly, carrying the same Rotobrush and Nikro equipment we use on commercial jobs across Snohomish County.
Eastmont’s builder-grade flex duct systems are hitting end-of-life now, and the damp Puget Sound winters here make every tear and disconnection worse than it looks. We don’t quote sealing over a duct we haven’t inspected with a camera. That’s how you end up trapping mold inside a crushed run rather than fixing the airflow problem that caused it.
Why Hollis Air Duct Cleaning Is Eastmont’s Preferred Duct Sealing Company
We’ve been doing this since 2004 as part of the Garrison Partners family, and our Duct Sealing team knows Eastmont’s housing stock cold. The 1990s apartment complexes near Silver Lake, the tract homes off 112th Street SE, the older mill-era houses retrofitted with HVAC near the Snohomish River, we’ve worked on all of them. Roy Castellanos built this operation on The Garrison Standard: written price before work starts, arrive inside the window, leave the site clean.
Our technicians are background-checked and uniformed, and our phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues. When you schedule duct sealing in Eastmont, you get a written price on site before we touch anything, and every job carries our 365-Day Done Right Promise. If the seal fails or the repair doesn’t hold, we come back and make it right at no charge, including a free second visit.
We don’t compete on the lowest teaser price. We compete on the price you can trust, the one that doesn’t move when the technician walks through your door.
Duct Repair in Eastmont
Duct Repair in Eastmont almost always starts with finding damage that standard cleaning won’t touch. In this market, a typical duct repair runs $280 – $520 for reconnecting separated flex runs, replacing crushed sections, or rebuilding plenum connections, with more extensive rebuilds reaching $680 – $940 when multiple runs behind the air handler need replacement. We camera-inspect first, so you know exactly what failed and why before we quote.
Crushed Flex Behind the Air Handler
The Silver Lake-area apartments from the 1990s almost universally have this problem. The flex duct gets compressed during maintenance or just collapses from age, and Eastmont’s wet-season moisture turns that crushed section into a mold nursery. A homeowner near those apartments called about musty air in two bedrooms; our tech ran a camera inspection and found the flex run behind the air handler crushed flat, with condensation-darkened insulation and visible growth. Using negative pressure containment and agitation tools, we performed source removal on that run, then sealed and reconnected the supply and return ducts at the plenum and registers so the blower motor wasn’t pulling damp crawlspace air into the sleeping quarters.
Disconnected Joints in Original Tract Homes
The 1980s – 2000s subdivisions throughout Eastmont have flex duct that separates at joints after twenty-plus years of thermal cycling. The blower pulls harder to compensate, energy bills climb, and the disconnected end draws humid crawlspace air straight into bedrooms. We locate the separation with a camera, reconnect with mechanical fasteners and mastic sealant, then pressure-test the repair before we leave.
Air Duct Sealing in Eastmont
Air Duct Sealing in Eastmont requires knowing what you’re sealing, because sealing over a crushed or mold-contaminated run traps the problem inside. A typical sealing job here runs $340 – $580 for partial-system mastic sealing of accessible joints and registers, with full-system sealing of an average Eastmont home reaching $720 – $1,180 when we include plenum work, boot connections, and chase sealing. We only seal after camera verification, and we only seal clean duct.
Mastic Sealing for Accessible Joints
We brush on water-based duct mastic at every joint, register boot, and plenum connection we can reach. In Eastmont’s crawlspaces, that means sealing where flex meets metal, where metal meets the air handler cabinet, and anywhere the original installer used tape that’s dried and failed. Mastic stays flexible for decades; tape doesn’t.
Pressure Testing After the Seal
After sealing, we run a duct blaster or pressure test to verify the repair. In Eastmont’s older systems, we often find that sealing the obvious leaks exposes secondary leaks downstream, the ones that weren’t measurable until the primary path was closed. We mark those, quote the additional work in writing, and seal them only with your approval. No surprises at the door.
Trusted Brands We Service in Eastmont
We carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, and we stock filtration and sealing products from Honeywell, Aprilaire, and Guardsman for Eastmont customers who need fast turnaround without waiting on Seattle supply houses. The rotary brush systems handle the source removal inside flex duct; the negative-air machines keep containment tight while we work. For sealing, we use the same mastic and reinforcement tapes that commercial crews spec, not the hardware-store foil tape that peels off in a damp crawlspace after two winters. When we quote a repair in Eastmont, the parts are on the van or available next-day, because we’ve already seen what fails in this housing stock and we plan for it.
Common Duct Sealing Problems We See in Eastmont Homes
- Crushed flex duct behind air handlers in Silver Lake-area apartments. The 1990s builder-grade flex collapses under its own weight or gets crushed during filter changes, and Eastmont’s marine climate fills that restriction with condensation that breeds mold. Sealing over it traps the moisture inside.
- Disconnected flex at plenum joints in 1980s – 2000s tract homes. Thermal cycling and vibration loosen the original connections, and the blower starts pulling humid crawlspace air through gaps you can’t see from the living room. Camera inspection finds the separation every time.
- Undersized bath fans keeping indoor humidity high through damp winters. Eastmont’s wet-season humidity condenses inside duct runs, especially in homes where the bath fan was never upgraded from the original 50-CFM builder spec. Sealing alone won’t stop biological growth on the inner liner if the moisture source isn’t addressed.
- Failed tape seals at register boots in homes near the Snohomish River. The older mill-era houses with retrofitted HVAC used foil tape at metal-to-flex transitions, and that tape degrades faster in the higher humidity of the river floodplain. We remove the old tape, clean the joint, and seal with mastic that survives the damp.
Pricing for Duct Sealing in Eastmont, WA
Duct sealing in Eastmont typically runs $340 – $580 for partial-system work focused on accessible joints, register boots, and plenum connections. Full-system sealing of an average three-bedroom home with complete chase and boot work ranges $720 – $1,180. Duct repair, which we often need to perform first in Eastmont’s aging flex systems, adds $280 – $520 for reconnecting or replacing crushed runs, with extensive rebuilds behind the air handler reaching $680 – $940.
What moves the price: how much of the system is accessible without cutting drywall, whether we find crushed or disconnected duct that needs repair before sealing, and whether the job requires containment and source removal for mold-affected sections. We give you one flat price per system, agreed in writing before work starts. No per-vent pricing. No add-ons at the door. Call (361) 326-5060 for an exact quote, estimates are free, and we bring the camera so you see what we see.
We Also Serve Cities Near Eastmont
Our crews work throughout the region, and we regularly schedule Duct Sealing in Eastmont alongside jobs in Seattle, Spokane, Tacoma, and Vancouver. Dispatch is coordinated from our Seattle office, but the technician who arrives at your Eastmont home knows the local housing stock and carries the parts that fail here.
Serving Eastmont, WA - Our Local Coverage Area
We’re based in the Eastmont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Eastmont
The musty smell is almost always a crushed flex duct run behind the air handler, not dirty vents. In Eastmont’s Silver Lake-area 1990s complexes, builder-grade flex collapses directly behind the blower, and the wet-season condensation turns that crushed section into a mold site that sends spores into bedrooms. Vent cleaning doesn’t reach the restriction; camera inspection and repair do. Call (361) 326-5060 and we’ll show you exactly what’s back there.
We won’t seal duct we haven’t inspected and cleaned if needed, because sealing over mold or debris traps the problem inside. In Eastmont’s damp climate, biological growth inside crushed flex is common, and mastic over contamination just seals in the moisture source. We camera-inspect first, remove what’s contaminated, then seal the clean, intact runs. The price for both steps is written before we start.
Signs include rooms that never heat or cool evenly, rising energy bills with no thermostat change, or dust that seems to come from the vents themselves. In Eastmont’s original tract homes, flex duct separates at joints after decades of vibration and thermal cycling. We verify with a camera inspection; you’ll see the gap on screen before we quote the repair.
Sealing helps if the humidity is entering through duct leaks from crawlspace or attic, but it doesn’t fix humidity generated inside the home. In Eastmont, we often find that sealing disconnected returns stops the blower from pulling damp crawlspace air, while undersized bath fans continue adding moisture that condenses in duct runs. We identify both problems during inspection and quote what actually needs doing. Call (361) 326-5060 for an assessment.
We use water-based duct mastic applied with brushes at all joints and connections, mechanical fasteners at flex-to-metal transitions, and pressure testing or duct blaster verification after the work. Our equipment includes Rotobrush rotary systems for source removal, Nikro negative-air machines for containment, and sealing materials rated for the damp conditions in Eastmont crawlspaces. Every technician works to The Garrison Code: arrive inside the window, price in writing, complete by the book, leave the site clean.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Eastmont since 2004.