Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Desert Hot Springs
We’re the crew Hollis Air Duct Cleaning dispatches from our Inland Empire office when Desert Hot Springs homeowners call about sand pouring out of their vents, rooms that never cool evenly, or AC bills that climb every summer despite a new unit. Our technicians know the difference between ordinary dust and the fine desert silt that blows through the San Gorgonio Pass, and we seal duct systems to stop it. Most Desert Hot Springs appointments are scheduled within a few days, and you’ll get a written price before we touch anything. Call (361) 326-5060 to book a free estimate.
Why Hollis Air Duct Cleaning Is Desert Hot Springs’s Preferred Duct Sealing Company
We’ve been part of the Garrison Partners family since 2004, and our Desert Hot Springs customers know we show up inside the quoted window, in uniform, with background-checked techs who explain what they’re doing before they start. Our 365-Day Done Right Promise covers every sealing job in writing: if a joint we sealed fails within a year, we come back and make it right at no charge, including a free second visit. Phones are answered by a live person 24 hours a day, 7 days a week, so you’re not waiting through voicemail loops when your AC is running nonstop in August.
Desert Hot Springs homeowners specifically tell us they chose Hollis because we price in writing before work starts and don’t change the number at the door. That matters here, where many residents are retired and on fixed budgets, and where the summer heat means you can’t afford to have a crew walk away with the job half-done. We coordinate scheduling around your routine, not ours, because we know many of our customers are home all day and need low-disruption work.
Air Duct Sealing in Desert Hot Springs
Air Duct Sealing in Desert Hot Springs is fundamentally a sand-management service. The San Gorgonio Pass wind corridor drives fine desert silt into duct systems year-round, and because geothermal aquifer water keeps AC systems cycling in almost every home here, that sandy air moves through your ducts 365 days a year. Sealing stops the infiltration at every joint, plenum connection, and grille penetration. A typical whole-system sealing job in Desert Hot Springs runs $1,200 – $2,800 depending on accessibility, duct material, and how much of the system needs attention. We inspect first, write the price down, and only start once you approve it.
What We Seal and Why
We seal supply and return trunk lines, flex-duct connections at plenums, register boots, and any penetrations where sand enters the airstream. In Desert Hot Springs, the return plenum and coil cabinet are usually the worst leak points because they’re under negative pressure, actively drawing wind-blown sand through every gap. Our Duct Sealing team uses mastic and foil tape rated for 150°F+ attic temperatures, not standard duct tape that dries out and fails within one summer.
When Sealing Beats Replacement
Many Desert Hot Springs homes built from the 1950s through the 2000s have flex-duct runs in 150°F attics that are still structurally sound but leaking at the joints. If your ducts aren’t crushed, rodent-damaged, or asbestos-containing, sealing restores performance at roughly one-third the cost of full replacement. We’ll tell you honestly which category you’re in after camera inspection.
Duct Sealing Services in Desert Hot Springs
Duct Sealing Services in Desert Hot Springs cover everything from spot-repair of disconnected runs to full-system sealing with post-work pressure testing. We serve full-time residents, snowbirds with winter homes, and short-term rental owners whose properties sit sealed in summer heat. A targeted sealing of 3 – 5 problem joints starts around $450 – $750; comprehensive sealing of an entire system with attic access typically falls in the $1,200 – $2,800 range. Every job gets a written price before work begins and is backed by our 365-Day Done Right Promise.
Negative-Air Containment During Sealing
We run Nikro negative-air machines with HEPA filtration while we work, so the sand we disturb doesn’t resettle in your home. This matters in Desert Hot Springs, where accumulated silt can be inches deep in return plenums. The containment also protects residents who are home all day, particularly in 55+ communities where occupants may have respiratory sensitivity.

Post-Sealing Verification
After sealing, we pressure-test the system to confirm leakage reduction and show you before-and-after photos of the sealed joints. In Desert Hot Springs, we also check the coil cabinet and return grille seal, because sand entry at those points undoes the rest of the work. No job is complete until we’ve addressed the full sand path from outside to blower.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Desert Hot Springs
Hollis Air Duct Cleaning carries sealing materials and filtration components from Guardsman and Abatement Technologies, brands that spec products for commercial and residential HVAC contractors in extreme-climate zones like the Coachella Valley. We don’t make you wait for parts to ship from Los Angeles. Our trucks stock mastic rated for sustained 180°F exposure, foil tape with acrylic adhesive that won’t cook off in your attic, and replacement register boots for the common sizes found in Desert Hot Springs tract construction. If your system needs a filtration upgrade after sealing, we install Honeywell and Aprilaire media cabinets that capture the fine particulate standard fiberglass filters miss.
Common Duct Sealing Problems We See in Desert Hot Springs Homes
- Baked-off duct tape in 150°F attics. Homeowners or prior handymen sealed joints with standard cloth duct tape that dries to dust within one Desert Hot Springs summer. We remove the residue and reseal with mastic and foil tape rated for the actual temperature your attic reaches.
- Sand-choked return plenums ignored. The return side pulls air actively, so it’s the primary sand entry point. Sealing only supply runs while ignoring the plenum and coil cabinet leaves the main leak path wide open. We always inspect and seal both sides.
- Flex-duct pulled loose from boots in slab-foundation homes. Desert Hot Springs’s single-story stucco tract houses often have attic flex-duct that sags, kinks, or separates at the register boot after years of thermal cycling. We resecure and seal these connections with mechanical supports, not just tape.
- Sealed summer homes that cook dust into duct walls. Snowbird properties sit unused with no air circulation for months, baking accumulated sand onto flex-duct interiors. Sealing alone won’t remove baked-on residue; we coordinate source removal with our rotary brush systems before sealing the joints that let new sand in.
Pricing for Duct Sealing in Desert Hot Springs, CA
Most Desert Hot Springs homeowners pay between $1,200 and $2,800 for whole-system duct sealing, with smaller spot-repair jobs running $450 – $750. What moves you within that range: how much of the system is accessible (crawled attics vs. walkable ones), whether we need to remove baked-on sand before sealing, and if the job requires replacement of damaged flex-duct sections or register boots. We don’t price per vent or hit you with add-ons once the van is in your driveway. The price is written down before any work starts, and it does not move. Free estimates include camera inspection of your trunk lines and plenums. Call (361) 326-5060 to schedule yours.
We Also Serve Cities Near Desert Hot Springs
Our crews cover the full Coachella Valley from our Inland Empire dispatch office, including Duct Sealing in Desert Hot Springs and neighboring Palm Springs, Cathedral City, Thousand Palms, and Rancho Mirage. The same written pricing, background-checked technicians, and 365-Day Done Right Promise apply in every city we serve.
Serving Desert Hot Springs, CA - Our Local Coverage Area
We’re based in the Desert Hot Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Desert Hot Springs
Yes, sealing is the most effective way to stop San Gorgonio Pass sand from entering your duct system, because the sand doesn’t magically appear inside your vents; it’s pulled in through leaks in the return side, plenum connections, and gaps around register grilles. After a March wind event, we were called to a home in the Highland Palms 55+ community where the homeowner had been coughing every morning for weeks. Camera inspection showed sand piled in the return plenum and cooked onto the flex-duct walls near the air handler. We performed source removal under negative pressure with HEPA filtration and agitation tools, then sealed every accessible joint in the supply and return ducts with mastic and foil tape rated for the 150°F+ attic temperatures. The morning cough stopped within a week, and the homeowner said the house finally smelled clean again. Call (361) 326-5060 if you’re seeing similar symptoms.
Most sealing work is low-disruption: our technicians work in your attic or at register locations, not in your living space, and we schedule around your routine rather than arriving at peak afternoon heat when you’re resting. We use HEPA-contained negative-air equipment so there’s no dust migration, and we leave the site clean. Many of our Desert Hot Springs customers in 55+ communities are present during the entire job. Call (361) 326-5060 to discuss timing that works for you.
Sealing significantly reduces the cooked-dust smell by stopping new sand and outdoor particulate from entering your ducts while the system sits idle, but if there’s already baked-on residue inside your flex-duct from prior summers, sealing alone won’t remove it. We typically recommend source removal with our Rotobrush rotary brush system before sealing, so you’re not trapping old contaminants inside a newly tight system. Call (361) 326-5060 and we’ll inspect to tell you which approach your home needs.
If you’re seeing sand accumulation around vents, uneven cooling between rooms, or your AC runs constantly without reaching set temperature, you likely have leaks that cleaning alone won’t fix. We use camera inspection and pressure testing to distinguish between contaminated ducts that need source removal and leaky ducts that need sealing; many Desert Hot Springs homes need both. The inspection is free, and we’ll show you exactly what we found before recommending any work. Call (361) 326-5060 to book.
Yes, sealing typically reduces cooling costs 15 – 30% in Desert Hot Springs homes, because leaky ducts force your AC to work harder to compensate for air lost into the attic or unconditioned spaces. In a climate where systems run almost continuously from May through October, that savings adds up fast. The bigger immediate benefit for most of our customers is stopping the sand infiltration that degrades air quality and equipment life. Call (361) 326-5060 for a free estimate with written pricing.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Desert Hot Springs since 2004 as part of the Garrison Partners family.




Before
After
Before
After
Before
After