Duct Sealing in Cleburne - Tested First, Written Price Second

Fast, Reliable Duct Sealing Across Cleburne

We serve Cleburne from our Dallas-Fort Worth dispatch office, and our crews know the difference between a 1960s ranch off West Henderson and a 2005 build on the south side near Chisholm Trail Parkway. That local knowledge matters because duct sealing in Cleburne isn’t a generic job. The bentonite drilling dust that settles into every attic here, the original galvanized runs buried in decades of blown-in insulation, and the high water-table moisture near the Nolan River bottom all create failure modes you won’t find in a Fort Worth manual. When you call (361) 326-5060, you’ll reach a live person who can schedule a free estimate and explain what our technicians will actually look for in your specific house.

Call (361) 326-5060

Why Hollis Air Duct Cleaning Is Cleburne’s Preferred Duct Sealing Company

We’ve been part of the Garrison Partners family since 2004, and our Cleburne customers come back because we write the price down before we touch anything and we leave the site clean. The 365-Day Done Right Promise covers every duct sealing job in writing: if the seal fails or the airflow drops within a year, we return and make it right at no charge, including a free second visit.

Our technicians are background-checked and uniformed, and they arrive inside the quoted window. They carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, not hardware-store patch kits. When we seal ducts in Cleburne, we explain what we found, show you camera footage if you want to see it, and price the repair before we open a single can of mastic.

Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues, no waiting until Monday to get on the schedule.

Air Duct Sealing in Cleburne

Air Duct Sealing in Cleburne means finding where conditioned air is escaping your supply ducts or where unconditioned attic air is being pulled into your returns, then closing those gaps with mastic, mesh, and mechanical fasteners that last. Most Cleburne homes we work on lose 20 to 30 percent of their heated or cooled air through leaks before it ever reaches the registers. In a town where AC runs hard from May through September, that’s money bleeding into your attic every hour the compressor kicks on.

Our typical Air Duct Sealing job in Cleburne runs $450 to $950 for a whole-system seal on a single-family home. Smaller partial repairs on one or two disconnected branch runs start around $280. We price by the system, not by the vent, and we write it down before we start.

What We Find in Older Cleburne Homes

The post-war ranches and bungalows built from the 1950s through the 1970s dominate Cleburne’s core neighborhoods. Their original galvanized steel trunk lines were never designed for today’s continuous cooling loads, and decades of expansion and contraction have opened seams you can’t see from the register. We pull these runs out of the blown-in insulation, inspect with a camera, seal the joints, and reinstall them properly. No ceiling demolition required.

When Sealing Becomes a Repair

Sometimes we open an attic and find a branch run completely disconnected, crushed by a homeowner who stepped on it years ago, or rusted through at the seam. Sealing alone won’t fix that. We’ll show you the damage, quote the repair separately, and only proceed with your go-ahead. The written price covers everything we agreed to, nothing more.

Duct Sealing Services in Cleburne

Duct Sealing Services in Cleburne cover the full range of what it takes to make your ductwork hold pressure: inspection with remote camera, leak detection, mechanical reconnection of separated runs, mastic sealing of joints and seams, reinforcement with fiberglass mesh at high-stress points, and post-repair airflow verification. We don’t spray a sealant fog and call it done. Our Duct Sealing team works by hand, joint by joint, because that’s the only way to guarantee the seal lasts through a Cleburne summer.

Our Duct Sealing Services in Cleburne typically range from $450 to $950 for a complete system, with smaller targeted repairs starting at $280. Whole-system replacement of deteriorated flex duct runs in newer homes can run $1,200 to $2,400 depending on linear footage and attic access.

The Bentonite Dust Problem

Cleburne sits over the Barnett Shale, and the fine pale bentonite drilling dust that coats everything in town doesn’t stay outside. It filters into attics, settles on duct surfaces, and works its way into joints and seams. That dust is abrasive and hygroscopic, meaning it attracts moisture. In the humid Cleburne attic environment, it accelerates corrosion and prevents standard tape adhesives from bonding properly. We clean the joint surfaces before we seal them, and we use mastic rated for contaminated substrates.

Flex Duct in South and East Side Subdivisions

The 1990s and 2000s builds on Cleburne’s south and east sides used flex duct systems strung through hot attics. Over time the inner liner kinks at the air handler connection, the insulation sleeve slides, and the plastic collar separates from the register boot. Sealing these requires more than caulk. We often need to rebuild the connection with a proper metal start collar, secure the flex with nylon draw bands, then seal the assembly. Our technicians carry the fittings and tools to do it in one visit.

Trusted Brands We Service in Cleburne

We stock sealing and repair materials from Abatement Technologies, Guardsman, and Aprilaire so we don’t waste your time ordering parts. Abatement Technologies supplies the negative-air equipment we use to test system pressure before and after sealing. Guardsman and Aprilaire provide the filtration products we recommend when a sealed duct system still needs better air cleaning at the return. Our Rotobrush rotary brush systems clean joint surfaces before mastic application, which is critical in Cleburne where bentonite contamination would otherwise cause premature seal failure. Because we carry this inventory on our Cleburne service vans, most jobs finish same-day without a return trip.

Common Duct Sealing Problems We See in Cleburne Homes

• Original galvanized runs buried in blown-in insulation. These 1950s – 1970s steel trunk lines have rusted-through seams and disconnected branch runs that only show up when you pull the duct out for inspection. The insulation hides the damage and traps moisture against the metal.
• Bentonite dust plus attic humidity forming mud-like films. Along the Nolan River bottom and near the old Santa Fe depot, condensation in duct lines mixes with drilling dust to create a coating that pushes flex-duct joints apart and reopens sealed seams within a season if the surface isn’t properly prepared.
• Crushed or kinked flex duct at the air handler. In the newer south Cleburne subdivisions, the original installer often left too little slack at the plenum connection. Years of vibration and thermal cycling kink the inner liner, restricting airflow so severely that sealing alone cannot restore performance.
• Disconnected register boots in ceiling cavities. The drywall contractors in the 1990s builds sometimes pushed boots out of alignment during installation. The flex duct appears connected but has pulled free inside the ceiling, dumping conditioned air into the wall or attic space.

Pricing for Duct Sealing in Cleburne, TX

We Also Serve Cities Near Cleburne

Our crews run regular routes to Cleburne and the surrounding communities, including Keene, Joshua, Alvarado, and Burleson. The same written pricing, the same 365-Day Done Right Promise, and the same background-checked, uniformed technicians apply in every town we serve.

FAQs About Duct Sealing in Cleburne