Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Tacoma
Dryer vent cleaning in Tacoma typically runs $180 – $340 for a standard residential system, and most jobs take 60 to 90 minutes from arrival to cleanup. We’re the Tacoma crew for Hollis Air Duct Cleaning, dispatching from our Seattle office with technicians who serve this market daily. We know the difference between a Point Ruston condo vent and a rural run off 112th Street East, and we price them both in writing before we touch a tool. Call (361) 326-5060 for a free estimate.
Tacoma’s marine climate changes the game for dryer vent maintenance. Where drier cities deal with fluffy lint, we deal with damp lint that mats, mildews, and hardens into something closer to felt than fabric. Our Dryer Vent Cleaning team carries agitation tools and inspection cameras because a visual check from the outside won’t tell you what the inside of a Tacoma vent actually looks like.
Why Hollis Air Duct Cleaning Is Tacoma’s Preferred Dryer Vent Cleaning Company
We’ve been doing this since 2004. The Garrison Standard means we arrive inside the quoted window, price in writing before work starts, and leave the site clean. No exceptions. In Tacoma, that standard matters more because the conditions are harder. A crew that cuts corners in this climate leaves you with a vent that looks clean and still grows mold behind the cap.
Our technicians are background-checked and uniformed. You know who’s walking into your home before they arrive. We use Rotobrush rotary systems and Nikro negative-air machines, the same tools commercial crews run, and we explain what they’re doing in plain terms while they work. The 365-Day Done Right Promise covers every job in writing. If the work fails within a year, we come back and make it right at no charge, including a free second visit.
Phones are answered by a live person 24 hours a day, seven days a week. No voicemail loops, no callback queues, no waiting until Monday to schedule.
Dryer Vent Inspection in Tacoma
Dryer Vent Inspection in Tacoma starts with a camera run through the full vent pathway, from the dryer’s transition duct to the exterior termination. We look for lint accumulation density, moisture staining, disconnected joints, improper slope, and signs of mildew or mold colonization on the duct interior. In Tacoma’s climate, we also check whether the vent cap seals properly when the dryer is off, since damp outside air wicks backward into the system for months of the year. A standalone inspection runs $120 – $180, or it’s included at no extra charge when bundled with a full cleaning.
Camera Documentation
We record the full inspection and show you the footage. You’ll see exactly what we’re seeing: the lint mat, the sag, the moisture stain, or the clear run. No guesswork, no trust-me language. The camera doesn’t lie, and in Tacoma’s humidity, it often reveals problems that a flashlight and mirror would miss entirely.
Written Findings and Quote
After the camera run, we hand you a written report with photos and a fixed-price quote for any recommended work. The price on that paper is the price at the door. It does not move. That’s The Garrison Standard, and it’s how we’ve operated since 2004.
Commercial Dryer Vent Cleaning in Tacoma
Commercial Dryer Vent Cleaning in Tacoma covers multi-unit housing, laundromats, assisted-living facilities, and any business running commercial or high-volume residential dryers. These systems use larger-diameter ductwork, often with longer horizontal runs and booster fans, and they accumulate lint faster than single-family vents because of cycle volume. We inspect with remote cameras, clean with rotary agitation tools and Nikro negative-air extraction, and test airflow before and after to document improvement. Commercial jobs in Tacoma typically range from $350 – $800 depending on run length, access difficulty, and whether the system has been maintained on schedule or neglected.
Multi-Unit and HOA Properties
Apartment complexes in Tacoma’s Stadium District and newer developments near Point Ruston often share common vent chases that run vertically through multiple floors. One blocked unit can backpressure neighbors. We map the full system, clean each branch, and verify termination caps are intact and properly screened against bird intrusion.
Restaurant and Hospitality Laundry
Hotels and care facilities near I-5 and the Tacoma Mall corridor run dryers near continuously. Lint buildup in these commercial runs is dense and often compacted by heat. We schedule after-hours to avoid disrupting operations, and we provide before-and-after airflow readings for your maintenance logs.
Trusted Brands We Service in Tacoma
We carry parts and service knowledge for dryer systems from major manufacturers, and we stock replacement vent caps, bird guards, and transition hoses for same-day installation on most Tacoma jobs. Our equipment roster includes Rotobrush rotary brush systems for mechanical agitation, Nikro negative-air machines for controlled debris extraction, and Honeywell and Aprilaire filtration products when we’re integrating dryer vent work with Air Duct Cleaning in Tacoma and broader HVAC maintenance. We don’t show up hoping we have what you need. We confirm the parts before we dispatch.
Common Dryer Vent Cleaning Problems We See in Tacoma Homes
- Damp lint matting in low-slope flex runs. Tacoma’s humidity keeps lint from drying out as it travels. In homes in the Northeast Tacoma hills and along rural gravel roads, we find flex duct sagging between joists where rainwater and condensation collect, turning lint into a dense felt plug that chokes airflow and forces the dryer to run twice as long.
- Silica dust binding with lint in rural properties. Unpaved roads around Tacoma load the laundry room with fine dust that mixes with lint and wood-heat ash into a hard, gritty compound. A standard brush won’t break it up. We use camera-guided agitation tools to fracture the plug and negative-air extraction to pull it out intact.
- Mold and mildew colonizing the vent interior. Because Tacoma’s relative humidity stays above 60% for months, mold spores germinate on the damp lint layer inside the duct. The vent looks clear from the outside, but the interior wall is coated with biological growth that releases spores into the laundry room every time the dryer runs.
- Outbuilding and detached-garage vents neglected for years. Longer service drives mean these runs often get skipped. By the time we see them, they’ve been extended with extra flex duct that’s crushed behind storage, disconnected at a coupling, or terminating under a deck instead of to code. We reroute to proper exterior termination and install bird guards where missing.
Pricing for Dryer Vent Cleaning in Tacoma, WA
A standard residential dryer vent cleaning in Tacoma runs $180 – $280 for a single-story home with accessible exterior termination and a straight run under 15 feet. Two-story homes, roof terminations, or runs with multiple bends run $260 – $340 because they require more time and specialized equipment. Commercial systems start at $350 and scale with duct diameter, run length, and access difficulty.
What moves the price: roof access requiring ladder work, bird guard or vent cap replacement, rerouting damaged flex duct to rigid metal, and detached-garage or outbuilding runs that need extension or correction. We give you the full price in writing before we start. No per-foot add-ons, no surprise charges once the van is in your driveway. Estimates are free. Call (361) 326-5060.
We Also Serve Cities Near Tacoma
Our crews cover the full South Sound area including Dryer Vent Cleaning in Tacoma proper plus Milton, University Place, Puyallup, and Federal Way. Same equipment, same written pricing, same 365-Day Done Right Promise. If you’re on the edge of our service radius, call and we’ll confirm drive time. We don’t book jobs we can’t show up for on time.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Tacoma
Twice a year, minimum. The combination of unpaved-road dust, wood-heat ash, and Tacoma’s persistent humidity creates a lint compound that builds faster and harder than in city conditions. Spring and fall cleanings keep airflow optimal and catch moisture problems before mold establishes. Call (361) 326-5060 to schedule both visits at once.
Tacoma sits lower in the Puget Sound basin with less wind dispersion and higher average humidity than Seattle, plus industrial particulate from the Tideflats that provides additional nucleation surfaces for mold spores. The “Tacoma Aroma” isn’t just a smell; it’s a marker of the particulate load your vent is processing. Seattle’s drier west-side neighborhoods and better air circulation don’t see the same biological growth rates.
Yes. These runs are often longer, improperly sloped, and terminated under cover instead of to open air, which traps moisture. We inspect with cameras, correct slope and termination to code, and install proper vent caps with bird screening. The price reflects the additional duct length and correction work, and we quote it in writing before starting.
Yes. Lint is highly flammable, and when it’s damp it compacts into dense layers that hold heat. The dryer’s high-limit thermostat is designed to trip before ignition, but a badly plugged vent can override that protection or cause the element to cycle erratically. We check thermostat function during inspection and document airflow improvement after cleaning. For safety, don’t run a dryer you suspect is badly vented. Call (361) 326-5060.
No. We remove lint, but we also extract silica dust, wood ash, mold colonies, and the hardened composite material these form in damp conditions. The process: camera inspection, rotary agitation to fracture compacted buildup, negative-air extraction to pull debris without contaminating your home, and airflow testing to confirm the dryer’s backpressure is within manufacturer spec. We show you before-and-after footage. Call (361) 326-5060 for a free estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Tacoma since 2004.