Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Spring
Dryer vent cleaning in Spring typically costs $150 – $350 for a standard single-story home, and most jobs take 60 – 90 minutes from arrival to final airflow test. If your dryer needs two cycles to finish a load or your laundry room wall gets hot during operation, the vent run is likely clogged beyond what the lint trap catches.
We serve Spring from our Houston dispatch office, with crews running daily routes through the Klein ISD corridor, Louetta corridor, and Spring Woods neighborhoods. We’ve worked in the same 1970s – 1990s slab-on-grade subdivisions that make up most of Spring’s housing stock, and we know the specific failure patterns these homes develop. Our Dryer Vent Cleaning team carries rigid metal replacement pipe, bird guards, and vent caps on every truck because Spring’s original attic-routed flex runs usually need more than just a vacuuming.
Call (361) 326-5060 for a free estimate. We’ll give you a written price before any work starts, and every job is covered by our 365-Day Done Right Promise.
Why Hollis Air Duct Cleaning Is Spring’s Preferred Dryer Vent Cleaning Company
Hollis Air Duct Cleaning, founded in 2004 as part of the Garrison Partners family, has built its reputation on The Garrison Standard: arrive inside the quoted window, price in writing before touching anything, complete the job by the book, and leave the site clean. Spring homeowners know what to expect because we say it plainly and put it in writing.
Our technicians are background-checked and uniformed. You get a name and photo before anyone arrives at your door. Phones are answered by a live person 24 hours a day, 7 days a week, no voicemail loops or callback queues.
Spring’s market has plenty of coupon-driven operators who quote $49 over the phone and present a $400 invoice once the van is in your driveway. Hollis doesn’t work that way. The price is written down before any work starts, and it does not move at the door. If the repair fails within a year, we return and make it right at no charge, including a free second visit. That’s the 365-Day Done Right Promise, backed in writing on every job.
Dryer Vent Repair in Spring
Dryer Vent Repair in Spring almost always involves replacing original foil or flexible plastic vent runs that were routed through 130°F+ attics in the 1970s through 1990s and have since sagged, crushed, or disconnected entirely. The typical repair runs $200 – $450 depending on run length, attic access difficulty, and whether we need to reroute to an exterior wall cap.
Spring’s slab-on-grade homes have no basement to hide a short straight run. Instead, the dryer sits against an interior wall and the vent travels 15 – 25 feet through the attic before reaching a soffit or gable-end termination. That distance, combined with foil flex that softens and sags in summer heat, creates low spots where lint packs solid. Homeowners notice the problem when loads take two cycles or the exterior vent flap stops moving entirely.
Crushed or Disconnected Flex Runs
We find these behind attic insulation in vaulted-ceiling homes where the original installer laid the flex directly on the ceiling drywall. Over decades, insulation weight, heat cycling, and rodent traffic compress the pipe. We remove the damaged section, install rigid metal pipe with proper slope and support straps, and seal joints with high-temperature mastic. The new run won’t sag again.
Improper Terminations
Some Spring homes terminate dryer vents into the attic, crawl space, or soffit instead of outside. This violates code and dumps moisture and lint into structural spaces. We reroute to a proper exterior cap with a functioning backdraft damper, installed at the correct height and clearance from HVAC intakes.
Dryer Vent Cleaning Company in Spring
Dryer Vent Cleaning Company services in Spring need to account for more than just the lint trap and the exterior cap. In this market, the real buildup happens along 20-foot attic runs of aging flex duct where airflow velocity drops at every sag and bend. A typical full cleaning runs $150 – $350 for standard residential systems, with multi-run or second-story configurations at the higher end.
Our process starts with airflow measurement at the exterior cap to establish baseline restriction. We then use a rotary brush system, powered by equipment from Nikro and Rotobrush, to mechanically agitate lint off the pipe walls while negative-air collection pulls it out of your home entirely. For Spring’s longer attic runs, we often run a camera after cleaning to verify the line is clear end-to-end. You’ll see the before-and-after images yourself.
Source Removal vs. Surface Cleaning
Some operators blow compressed air from the outside and call it done. That approach leaves packed lint in low spots. We perform source removal: mechanical agitation plus vacuum extraction at the point of disturbance. In Spring’s sagging flex runs, this is the only method that reliably clears the entire line.
Bird Guard and Cap Replacement
Spring’s mature oak and pine canopy attracts nesting birds and squirrels to warm vent terminations. We install metal mesh bird guards and replace cracked or missing dampers that let pests and weather into the line. A proper cap with functioning flapper also prevents backdraft that pushes humid attic air into your laundry room.
Trusted Brands We Service in Spring
We carry replacement parts and accessories from Honeywell, Aprilaire, and Abatement Technologies on every Spring route, along with rigid metal pipe and fittings in standard diameters. Most Spring homes use 4-inch diameter runs, but we stock transitions for older 3-inch and oversized configurations. Because our Houston office maintains inventory for the northern metro corridor, we rarely need to order parts for standard repairs. That means your job finishes in one visit, not two. We also source vent caps and bird guards rated for the Gulf Coast humidity and UV exposure that degrades cheaper plastic components in two to three years.
Common Dryer Vent Cleaning Problems We See in Spring Homes
- Attic-routed flex runs packed solid with lint. In Spring’s 1970s – 1990s Klein and Spring ISD subdivisions, original foil flex was run through 130°F+ attics with multiple sag points. Lint accumulates along the entire length, not just at the trap. The homeowner’s first warning is usually a second drying cycle or a hot laundry room wall.
- Vent terminations into attics or soffits. Some original builders in Spring Woods and older Klein neighborhoods terminated dryer vents into the attic space or under soffits to avoid exterior wall penetration. This dumps moisture and lint into structural areas and creates fire and mold hazards that homeowners don’t discover until we inspect.
- Crushed runs hidden by attic insulation. Slab-on-grade homes with vaulted ceilings often have the dryer vent buried in blown insulation directly above the ceiling drywall. Weight and heat gradually flatten the flex. There’s no basement access for inspection, so the problem goes unnoticed until airflow drops severely.
- Black dust on supply registers mistaken for mold. In 1980s Klein-area homes, the “black dust” that appears on supply vents after June heat waves is often fiberglass from degraded attic flex duct connections, not mold. The same attic conditions that destroy air duct seals also damage dryer vent runs. We check both systems when we’re in the attic.
Pricing for Dryer Vent Cleaning in Spring, TX
Most Spring homeowners pay between $150 and $350 for a complete dryer vent cleaning, with simple single-run configurations at the lower end and longer attic-routed systems, bird guard installation, or cap replacement pushing toward the upper end. Dryer vent repair, including replacing crushed flex with rigid metal pipe, typically runs $200 – $450 depending on run length and attic access difficulty.
What moves the price: run length and material (rigid metal replacement costs more than cleaning existing pipe), termination type (exterior wall cap vs. roof or soffit termination), whether we need to reroute entirely, and add-ons like bird guards or secondary lint traps. We do not quote per-vent or teaser prices that balloon at the door. You get one flat price per system, agreed in writing before we start.
Every estimate is free. Call (361) 326-5060 and we’ll give you a straight answer on what your specific configuration should cost.
We Also Serve Cities Near Spring
Our crews run daily routes through Spring and surrounding communities including Humble, Tomball, Houston, and Conroe. Scheduling and dispatch are coordinated from our Houston office, with local technicians living throughout the northern metro corridor. Whether you’re in a 1980s Klein subdivision, a newer Spring Trails build, or a Tomball ranch on acreage, we carry the same equipment standards and written pricing.
Serving Spring, TX - Our Local Coverage Area
We’re based in the Spring area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Spring
The vent run is almost certainly restricted. In Spring’s slab-on-grade homes, the dryer vent typically travels 15 – 25 feet through a hot attic in flexible pipe that sags and collects lint along its entire length, not just at the trap. The lint trap catches perhaps 30% of debris; the rest packs into low spots where airflow velocity drops. Call (361) 326-5060 for a free airflow test and written estimate.
Usually not. In 1980s Klein-area homes, that black dust is typically fiberglass particles from degraded attic flex duct connections, loosened by the 130°F+ June heat waves that bake Spring attics every summer. The same conditions damage your dryer vent runs. When we’re in your attic for dryer vent service, we’ll check your air handler and return duct for the same degradation pattern. Call (361) 326-5060 and we’ll inspect both systems.
We access the run from the attic, where the vent pipe is exposed, or from the exterior termination cap, whichever gives better mechanical access. For Spring’s long attic-routed flex runs, we typically use a rotary brush system with negative-air collection to agitate and extract lint without pushing it into your living space. Camera verification confirms the line is clear. Call (361) 326-5060 to schedule.
Yes, and Spring’s configuration makes it worse. Lint is highly flammable, and Spring’s long attic-routed flex runs place that fuel load inside a 130°F+ confined space near electrical connections. The U.S. Fire Administration reports thousands of dryer fires annually, with failure to clean as the leading cause. In Spring’s older homes, the restricted airflow also causes the dryer to overheat its own components. This is not a DIY job: the runs are long, hot, and often damaged. Call (361) 326-5060 for professional cleaning and inspection.
Dryer vent cleaning covers the dedicated exhaust line from your dryer to the exterior termination cap. Air duct cleaning is a separate service for your HVAC supply and return system. However, in Spring’s 1970s – 1990s homes, we often find the same attic conditions damaging both systems, so we inspect adjacent ductwork while we’re in the attic and will show you what we find. You choose what to address. Call (361) 326-5060 for a free estimate on either or both services.
Ready to get your dryer running safely and efficiently? Call Hollis Air Duct Cleaning at (361) 326-5060 for a free, written estimate. We’ll arrive in the quoted window, price the job before we touch anything, and back our work with the 365-Day Done Right Promise. If it’s not done right, we make it right. That’s The Garrison Standard.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Spring and the greater Houston metro since 2004.