Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Snellville
Dryer vent cleaning in Snellville typically runs $150 – $275 for a standard single-family home, and most jobs take 60 to 90 minutes from arrival to final airflow test. If your dryer’s taking two cycles to finish a load or your laundry room smells musty every spring, the vent run – not the dryer – is almost always the problem.
We’re the Dryer Vent Cleaning crew that serves Snellville out of our Atlanta dispatch office. Our techs know the subdivisions around Janmar, Knotts Landing, and Webb Gin House Road. We’ve worked in enough of those 1980s-through-2020s Gwinnett County homes to know what the builders left behind: crushed flex duct behind air handlers, sagging runs in humid attics, and drywall dust packed against the termination hood. We show up uniformed, background-checked, and on time. Call (361) 326-5060 for a free estimate.
Why Hollis Air Duct Cleaning Is Snellville’s Preferred Dryer Vent Cleaning Company
Snellville homeowners call us back because we price in writing before we touch anything. No estimate that balloons once we’re inside. The 365-Day Done Right Promise means if the work fails within a year, we return and make it right at no charge, including a free second visit. That’s written on every job, not implied.
Our technicians are accountable. Background-checked, uniformed, expected to arrive inside the quoted window and leave the site clean – that’s The Garrison Code in action. Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues.
We know Snellville’s housing stock. Most homes here are 1980s-2000s subdivisions with flexible ductwork in attics, often original to the house. After heavy spring rains, that attic flex duct develops condensation that drips onto insulation and wets lint inside the vent run. The musty smell that follows is why so many Snellville homeowners call us before summer AC season starts.
Dryer Vent Cleaning Company in Snellville
Dryer Vent Cleaning Company work in Snellville means source removal from the full vent run – not just vacuuming the lint trap or blowing air through the wall cap. We disconnect the transition duct at the dryer, inspect the run with a camera, then use a Rotobrush rotary whip system combined with negative-air extraction to pull lint, drywall dust, and debris from the entire length. We finish with an airflow test at the termination hood so you know the vent is exhausting at full volume.
Most Snellville homeowners need this service when the dryer starts taking longer per load, the laundry room heats up, or they smell something musty when the dryer runs. New-construction homes are especially prone to early clogs – drywall dust and framing debris from the build get pulled into the duct during the first months of occupancy and pack against the exterior hood.
What’s Included in a Standard Cleaning
We clean from the dryer connection to the exterior termination. That means the transition duct, the full run, and the wall or roof cap. We also check for proper slope, support spacing, and any crushed or disconnected sections. If we find a problem, we show you the camera footage and quote the repair in writing before doing anything.
When to Schedule
Every 12 to 18 months for most Snellville homes. Homes with pets, large families, or frequent laundry loads may need it sooner. New builds should get inspected at the one-year mark – construction debris often shows up late, not early.
Dryer Vent Inspection in Snellville
Dryer Vent Inspection in Snellville starts with a camera run through the full duct length and an airflow reading at the termination hood. We document what we find – lint buildup, sagging flex, condensation damage, bird nests, or improper materials – and give you a written report with photos. The inspection itself takes 20 to 30 minutes and costs $89 – $129. If you proceed with cleaning, we apply the inspection fee toward the service.
We recommend an inspection before buying any Snellville home, especially subdivisions built during Gwinnett County’s 1980s-2000s boom. Original flex duct in those attics is now 20 to 40 years old. It sags, it cracks, and the foil liner delaminates. A camera run tells you whether you’re looking at routine maintenance or a full reroute.
What the Camera Reveals
Our techs use a lighted borescope to show you the inside of the duct in real time. You’ll see lint accumulation at sag points, wet paste from spring condensation, or the telltale white dust of drywall debris in newer homes. We save the footage so you have a baseline for future comparison.
Inspection vs. Cleaning
Some vents are clean enough that we recommend waiting. Others are packed solid and need immediate service. The inspection lets us make that call with evidence, not guesswork. Either way, you get a written price before any work starts.
Trusted Brands We Service in Snellville
We clean and inspect every major dryer brand installed in Snellville homes – Whirlpool, Maytag, LG, Samsung, GE, Bosch, and Speed Queen. Our trucks carry replacement transition ducts, termination hoods, and bird guards from Guardsman and Abatement Technologies, so most repairs finish same visit without a parts order. For vent reroutes or hard-pipe upgrades, we stock galvanized snap-lock duct, elbows, and fire-rated foil from Nikro. If your Snellville home needs a component we don’t have on the van, we source it fast through our Atlanta supply chain and schedule the return visit inside your window.
Common Dryer Vent Cleaning Problems We See in Snellville Homes
- Builder-grade flex duct sagging in humid attics. Most Snellville dryer vent runs are 20-35 feet of flex duct snaking through the attic. The hangers loosen over time, the duct sags between supports, and lint catches at every low point. A homeowner’s shop-vac can’t reach these mid-span clogs.
- Spring condensation turning lint to paste. After Gwinnett County’s heavy spring rains, attic temperatures swing and condensation forms inside the duct. Wet lint clings to the foil liner instead of blowing through. The result is a musty smell every April and drying times that creep up month by month.
- Drywall dust packed in new-construction vents. Homes built in 2019 or later around Webb Gin House Road and Knotts Landing often have drywall debris and framing dust lodged against the exterior termination hood. This trips the dryer’s high-limit thermostat and creates a fire hazard the builder’s punch list missed.
- Crushed transitions behind air handlers. In Snellville’s compact utility rooms, the dryer transition duct gets kinked or crushed where it passes the AC air handler. Airflow drops by half. The dryer overheats. The homeowner blames the appliance when the real problem is a 12-inch section of smashed flex.
Pricing for Dryer Vent Cleaning in Snellville, GA
Standard dryer vent cleaning in Snellville runs $150 – $275 for a single-family home with a vent run up to 35 feet. Longer runs, multiple turns, or hard-to-access terminations (roof caps, second-story walls) may push the upper end toward $325. Vent rerouting, hard-pipe upgrades, or bird guard installation are quoted separately in writing before work begins.
Here’s how Snellville pricing breaks down:
- Dryer Vent Inspection: $89 – $129 (applied to cleaning if scheduled)
- Standard Vent Cleaning (single run, up to 35 ft): $150 – $275
- Extended Run or Roof-Termination Access: $275 – $325
- Vent Rerouting / Hard-Pipe Upgrade: $400 – $750 (quoted on-site)
- Bird Guard Installation: $85 – $150
- Vent Cap Replacement: $75 – $125
We don’t price per vent or charge trip fees. One flat price per system, agreed in writing, before any work starts. No bait-and-switch. Call (361) 326-5060 for a free estimate.
We Also Serve Cities Near Snellville
Our crews cover Snellville and the surrounding Gwinnett and Rockdale County area, including Lilburn, Grayson, Conyers, and Redan. Scheduling is coordinated from our Atlanta office, with local techs dispatched to your neighborhood. Same standards, same written pricing, same 365-Day Done Right Promise.
Serving Snellville, GA - Our Local Coverage Area
We’re based in the Snellville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Snellville
Construction debris from drywall sanding, framing, and insulation work gets pulled into the dryer duct during your first months of occupancy. It packs against the exterior termination hood and hardens into a clog that the builder’s crew never cleared. We see this in nearly every new Snellville subdivision, especially around Knotts Landing and Janmar. Call (361) 326-5060 for an inspection – we’ll show you exactly what’s in there.
Signs include drying times increasing from 45 minutes to 75+ minutes, the laundry room getting hot and humid during cycles, a musty smell when the dryer runs, or the exterior hood barely puffing air when the dryer is on. These symptoms point to a mid-span clog, not a dirty lint screen. We run a camera to confirm location and severity, then quote cleaning in writing.
Snellville’s humid subtropical climate produces heavy spring rains followed by warm attic temperatures. Condensation forms inside flex duct runs, wetting accumulated lint into a paste that clings to the foil liner and grows mold. The smell hits every time the dryer heats that damp section. Source removal with a rotary brush system, followed by proper slope and support, fixes it.
In most cases, yes. We access the run from the dryer connection and the exterior termination, using flexible rotary whips and negative-air machines to pull debris both directions. We only cut drywall if the duct is disconnected, crushed, or improperly routed behind framing – and we’d show you the camera evidence and quote the repair in writing first.
Builders should have used rigid or semi-rigid metal duct instead of foil flex for the full run, supported it every 4 to 6 feet to prevent sagging, and capped the duct during construction to keep out drywall dust. They should have pressure-tested airflow before handover. Most didn’t. We fix what they left behind and bring it up to IRC code with hard-pipe transitions and proper termination.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Snellville and the greater Atlanta area since 2004.