Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across SeaTac
Dryer vent cleaning in SeaTac typically runs $150 – $280 for a standard single-family home, with most jobs completed in 60 – 90 minutes. Our crews serve SeaTac from our Seattle office, so we’re familiar with the tight parking behind west-side ramblers and the rooftop access challenges at International Boulevard complexes. Call (361) 326-5060 for a free estimate.
We’ve worked in SeaTac long enough to know the local housing stock: 1960s-1980s ramblers and split-levels on the west side and around Angle Lake, plus dense apartment and townhome complexes along International Boulevard built in the 1990s and 2000s. Many of these buildings have original flex duct and shared vent stacks that collect lint differently than standalone homes. Our Dryer Vent Cleaning team carries the right equipment for both scenarios, from truck-mounted Nikro negative-air units for long street-to-vent runs to compact rotary brush systems for tight mechanical rooms.
Why Hollis Air Duct Cleaning Is SeaTac’s Preferred Dryer Vent Cleaning Company
We’ve built our reputation in SeaTac on showing up inside the quoted window and pricing in writing before any work starts. That discipline matters especially here, where restricted parking and shared building systems can turn a simple cleaning into a coordination exercise.
Our technicians are background-checked and uniformed, and we follow The Garrison Code on every job: arrive squared away, explain what we’re doing in plain terms, leave the site clean. Roy Castellanos, who leads Hollis Air Duct Cleaning, set that standard when the company joined the Garrison Partners family in 2004, and we apply it to every SeaTac home we enter.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops, no callback queues. If you’re dealing with a dryer that’s running hot or taking two cycles to finish a load in SeaTac, you can reach us when it’s on your mind.
Every job carries our 365-Day Done Right Promise in writing. If the work fails within a year, we return and make it right at no charge, including a free second visit. That’s not a slogan; it’s a document you sign.
Dryer Vent Repair in SeaTac
Dryer Vent Repair in SeaTac addresses the mechanical failures that cleaning alone won’t fix: crushed or disconnected duct behind the dryer, damaged vent caps that let in rain and birds, or sections of flex duct that have sagged and trapped lint in low spots. A typical repair in SeaTac runs $180 – $420 depending on material length and access difficulty.
Crushed Duct and Disconnected Runs
We see this constantly in SeaTac’s older west-side ramblers, where dryers get pushed back against walls and pinch the transition duct. The dryer still runs, but hot moist air leaks into the wall cavity or crawlspace. We replace the damaged section with solid metal duct, seal joints with mastic, and leave enough slack so the dryer can be pulled out for cleaning without breaking the connection.
Vent Cap and Termination Damage
SeaTac’s wet marine climate rots flapper-style vent caps and corrodes screens. We install replacement caps with proper backdraft dampers and bird guards sized to local code. If your vent terminates through the roof, we’ll verify the flashing is intact, because a leak there damages more than just the duct.
Dryer Vent Cleaning Company in SeaTac
Dryer Vent Cleaning Company service in SeaTac means more than vacuuming lint from a trap. We clean the full pathway from the dryer connection through the wall or crawlspace run to the exterior termination, using rotary brush agitation and negative-air extraction to remove compacted lint that household tools can’t reach. A standard cleaning in SeaTac runs $150 – $280; multi-unit stack cleaning or roof-access jobs run $220 – $450.
Shared Stack and Multi-Unit Systems
In SeaTac’s dense International Boulevard apartment and townhome complexes, dryer vents frequently terminate in shared rooftop or wall stack chases serving multiple units. A single clogged lint pathway can back up into neighboring units’ air handlers and trigger building-wide dryer shutdowns. We coordinate with property managers, inspect from the roof access point when available, and verify airflow at each unit’s termination before signing off.
Airport-Corridor Particulate Loading
Technicians working near Sea-Tac International Airport regularly pull out ducts clogged with a gray-black fuzz from jet exhaust and road grit, a local signature that customers in nearby cities simply don’t see. That blend of aviation particulate, rubber tire dust from I-5 and SR-518, and warehouse exhaust compacts with lint into a dense mat that requires mechanical agitation, not vacuum-only cleaning.
Trusted Brands We Service in SeaTac
We carry professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, the same tools commercial crews use in SeaTac’s hospitality and warehouse buildings. Our rotary brush systems break up compacted lint in long flex-duct runs, while Nikro negative-air machines maintain suction on extended hose setups when we’re working from street parking behind Angle Lake ramblers. We stock common vent caps, bird guards, and transition fittings locally, so most SeaTac repairs don’t wait on parts. If your system uses Honeywell, Aprilaire, or Guardsman filtration components, we can inspect and advise on their condition while we’re on site.
Common Dryer Vent Cleaning Problems We See in SeaTac Homes
- Shared stack chases in International Boulevard apartment complexes mean a clog in one unit’s branch backs up lint into neighboring units. Single-unit cleaning leaves the real blockage in place, which is why we inspect the full stack when building access allows.
- Restricted surface parking behind 1960s-1980s west-side ramblers forces our truck-mounted negative pressure units and Rotobrush hoses to run from the street. That adds length to the hose run and reduces suction at the vent termination, so we size our equipment accordingly rather than showing up with a shop vacuum and hoping.
- SeaTac’s cool marine climate keeps dryers running heavily through fall and winter, so lint in unheated crawlspace or exterior wall runs stays damp, compacts into a hard mat, and resists the vacuum-only cleaning many low-cost providers rely on. We see this especially in January and February.
- Original flex duct in 1990s-2000s townhomes along International Boulevard has aged past its service life. The spiral wire support corrodes, the material sags between joists, and lint collects in the low spots. Cleaning alone won’t fix sagging duct; we flag it and quote replacement if needed.
Pricing for Dryer Vent Cleaning in SeaTac, WA
Here’s what dryer vent cleaning costs in SeaTac’s market:
- Standard single-family home cleaning: $150 – $280
- Multi-unit shared stack cleaning (per building, coordinated): $220 – $450
- Dryer vent repair (crushed duct, cap replacement, rerouting): $180 – $420
- Bird guard or vent cap installation: $85 – $160
- Camera inspection of full duct run: $120 – $195
What moves the price: length of duct run, number of bends, access difficulty (crawlspace vs. exterior wall vs. roof stack), and whether we need to coordinate with a property manager for multi-unit buildings. We give you a written price before any work starts, and that number does not move at the door. No per-vent pricing, no add-on surprises. Call (361) 326-5060 for a free estimate.
We Also Serve Cities Near SeaTac
Our SeaTac crews also handle dryer vent cleaning and repair in Seattle, Spokane, Tacoma, and Vancouver. Each location operates independently under The Garrison Standard, with the same written pricing and 365-Day Done Right Promise.
Serving SeaTac, WA - Our Local Coverage Area
We’re based in the SeaTac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in SeaTac
No, and doing so would waste your money. In SeaTac’s shared-stack buildings, lint compacts at branch junctions and in the main chase above where individual ducts meet. Cleaning only your branch leaves the blockage in place and often pushes debris into neighboring units. We inspect and clean the full shared pathway from the roof or main access point, then verify airflow at each termination. Property managers in International Boulevard complexes call us specifically for this coordinated approach. Call (361) 326-5060 to schedule a building inspection.
SeaTac’s location under the Sea-Tac International Airport flight path and adjacent to the I-5/SR-518 industrial corridor loads vents with aviation particulate, rubber tire dust, and warehouse exhaust that mixes with lint into a dense gray-black mat. That blend, combined with the cool marine climate that keeps lint damp and compacted, creates blockages we simply don’t see at the same frequency in nearby cities. The housing stock matters too: SeaTac’s 1990s-2000s townhomes often have original undersized flex duct that traps debris more readily than newer systems.
Cleaning removes lint and debris from an intact duct system. Repair fixes the system itself: replacing crushed or disconnected sections, rerouting duct that sags or has too many bends, installing proper vent caps with backdraft dampers, or sealing joints that leak air into wall cavities. In SeaTac, we often find that cleaning reveals repair needs, especially in older west-side ramblers where decades of dryer movement have damaged the transition duct. We photograph what we find, explain it in plain terms, and give you a separate written price for any repair before proceeding.
Yes, specifically because a clogged or leaking dryer vent dumps lint particles and combustion byproducts into your home’s air rather than exhausting them outside. In SeaTac’s dense housing along International Boulevard, where multiple units share air handler zones, one compromised vent can affect indoor air quality across several homes. Cleaning the full pathway and sealing leaks at connections keeps that pollution stream where it belongs: outside. For the EPA’s broader indoor air findings, see epa.gov/indoor-air-quality-iaq.
We work from the best available access point, which may be individual unit terminations, a ground-level cleanout, or a maintenance closet stack. Our Nikro negative-air machines and compact Rotobrush systems run on extended hose setups when truck-mounted units can’t park adjacent. In SeaTac’s restricted-lot ramblers, we’ve run 150-foot hose setups from street parking and maintained adequate suction by sizing the equipment to the job. We coordinate with building management for access and schedule around tenant needs. Call (361) 326-5060 and we’ll walk through your building’s specific layout.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving SeaTac since 2004.