Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Seal Beach
Dryer vent cleaning in Seal Beach typically runs $180 – $340 for a standard single-story home, and our crews schedule most jobs within a few days of your call. We’re familiar with the tight retrofitted layouts in Old Town, the 1960s tract homes up on the Hill, and the salt-laden air that corrodes exterior vent hoods along Ocean Avenue before interior clogs ever become the problem. Our Dryer Vent Cleaning team dispatches from our Los Angeles coordination office, with technicians who know Seal Beach’s specific housing stock and coastal failure modes. Call (361) 326-5060 for a free estimate and we’ll price the job in writing before any work starts.
Why Hollis Air Duct Cleaning Is Seal Beach’s Preferred Dryer Vent Cleaning Company
We’ve been serving coastal Orange County since 2004 as part of the Garrison Partners family, and our Seal Beach customers know we show up inside the quoted window, in uniform, with background-checked technicians who understand local conditions. The 365-Day Done Right Promise covers every job in writing: if the work fails within a year, we return and make it right at no charge, including a free second visit. Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail loops. No callback queues.
Our pricing is written down before we touch anything, and it does not move at the door. That’s The Garrison Standard, and it’s how we operate in every Seal Beach home we enter, whether we’re performing dryer vent work or Air Duct Cleaning in Seal Beach.
Dryer Vent Installation in Seal Beach
Dryer Vent Installation in Seal Beach addresses a specific coastal problem: the original metal vent hood and termination fittings on homes near the beach corrode faster than inland counterparts, and many 1960s tract houses still run unsafe plastic or foil transition ducts that violate current California building code. A proper installation here means rigid or semi-rigid metal from the dryer collar to the exterior termination, with a corrosion-resistant hood rated for salt-air exposure. In Seal Beach, a full dryer vent installation typically runs $350 – $650 depending on run length, access, and whether we’re routing through an attic crawl or a direct wall penetration.
When Installation Beats Repair
If your existing run uses the white vinyl flex duct that was common in 1960s – 70s construction, we won’t clean it. We’ll replace it. That material is a fire hazard and violates current code. Same for any run with multiple 90-degree turns, excessive length over 25 feet, or termination through a soffit or crawlspace instead of an exterior wall. We flag these conditions during inspection and give you a written price for the correct installation.
Salt-Air Rated Terminations
Homes within a few blocks of the sand in Old Town and along Ocean Avenue need stainless steel or powder-coated hoods with proper backdraft dampers. Standard galvanized hoods seize or rust through in three to five years here. We stock marine-grade terminations and include the right hardware in every Seal Beach installation quote.
Dryer Vent Repair in Seal Beach
Dryer Vent Repair in Seal Beach often involves fixing what salt air and mid-century construction have damaged: seized exterior dampers, crushed flex runs pinched behind original cabinets, and wall penetrations corroded through at the termination point. Repair work runs $200 – $450 depending on whether we’re replacing a hood and transition or accessing a damaged section in an attic or behind built-ins. We inspect with a camera first, show you what we found, and give you a written price before any repair begins.
Corrosion Damage at the Wall
The exterior damper is where Seal Beach’s coastal environment does its worst work. Salt aerosol from the marine layer crystallizes on the metal hood, the hinge pin seizes, and the flapper either sticks open (letting in rain and nesting debris) or rusts shut (trapping moist exhaust air inside). A standard lint cleaning won’t fix this. We replace the damaged hood with a corrosion-resistant unit and verify proper operation before we leave.
Crushed Runs in Tight Spaces
Old Town’s smaller homes often have dryers tucked into converted closets or original utility niches with short, angled duct runs. Decades of vibration, cabinet installation, or handyman “fixes” can crush or kink the flex duct behind the machine where it’s invisible. Our camera inspection finds these problems. We reroute or replace the damaged section with proper metal duct and secure it so it stays open.
Trusted Brands We Service in Seal Beach
Our equipment roster includes Nikro negative-air machines for controlled lint extraction, Honeywell filtration components, and Aprilaire humidity control products. We stock replacement hoods, transitions, and termination fittings locally so Seal Beach customers aren’t waiting on parts. For homes with integrated ventilation systems or indoor air quality add-ons, we also work with Abatement Technologies components. Every tool on our van is professional-grade, not hardware-store gear, and our technicians explain what they’re using and why before they start the job.
Common Dryer Vent Cleaning Problems We See in Seal Beach Homes
- Salt-corroded exterior hoods in Old Town and Ocean Avenue homes. The marine layer deposits salt crystals on metal terminations, causing hinges to seize and flappers to rust open or shut. We replace these with marine-grade stainless hoods, not just brush out the lint.
- Damp lint matting from coastal humidity. Seal Beach’s marine layer keeps the first few feet of vent run humid year-round. Lint here packs into a dense, damp mat rather than the dry, flaky buildup seen inland. Our rotary brush systems with negative-air extraction remove this material completely.
- Crushed or disconnected flex duct behind original cabinets. The Hill’s 1960s – 70s homes and Old Town’s retrofitted utility spaces often have tight runs pinched by decades of cabinet work. Camera inspection finds damage that visual checks miss.
- Underslab or attic runs with poor access. Many College Park and Hill homes route dryer vents through attics or underslab channels. These runs sag, collect lint in low spots, and corrode from condensation. We assess accessibility and give honest recommendations for rerouting when repair isn’t practical.
Pricing for Dryer Vent Cleaning in Seal Beach, CA
A standard dryer vent cleaning in Seal Beach runs $180 – $280 for a single-story home with direct exterior access and a straight run under 15 feet. Two-story homes, attic or underslab routing, or runs with multiple turns run $280 – $340. Dryer vent installation, when needed due to code violations or irreparable damage, ranges $350 – $650. Dryer vent repair, including hood replacement and transition repair, typically falls between $200 – $450.
What moves the price: run length and complexity, access difficulty (attic crawl, behind built-in cabinets), and whether we’re cleaning an intact system or repairing corrosion or crush damage discovered during inspection. We give one flat price per system, agreed in writing before work starts. No per-foot add-ons. No surprises at the door. Estimates are free. Call (361) 326-5060.
We Also Serve Cities Near Seal Beach
Our crews work throughout coastal and inland northwest Orange County, including Dryer Vent Cleaning in Seal Beach and surrounding communities: Surfside, Los Alamitos, Cypress, and Hawaiian Gardens. Each home gets the same written price, the same 365-Day Done Right Promise, and the same background-checked, uniformed technician standard.
Serving Seal Beach, CA - Our Local Coverage Area
We’re based in the Seal Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Seal Beach
Salt-laden marine air from the Pacific corrodes galvanized steel and standard aluminum hoods within three to five years on homes near the beach, especially in Old Town and along Ocean Avenue. Inland cities like Cypress and Los Alamitos see the same hoods last a decade or more because their ductwork isn’t exposed to daily salt aerosol deposition. We install stainless steel or powder-coated marine-grade terminations rated for coastal exposure. Call (361) 326-5060 for an inspection and exact quote.
Every 12 to 18 months for homes with flex duct in attics, and every year if your dryer sees heavy use or your home is within a few blocks of the sand. Attic runs in the Hill’s 1960s – 70s homes sag over time, creating low spots where damp lint accumulates faster than in rigid systems. The marine layer adds moisture that accelerates buildup. We inspect attic routing during our cleaning and flag sag or damage for repair. Call (361) 326-5060 to schedule.
Extended drying time is usually restricted airflow from lint buildup, but in Seal Beach it can also mean a corroded exterior damper stuck shut, a crushed transition duct, or a failing blower motor. We run a camera inspection to distinguish between these causes before quoting work. A simple clog cleans up fast. Corrosion damage or a crushed run needs repair. Either way, you’ll get a written price before we start. Call (361) 326-5060.
Yes, and that’s why we use camera inspection and specialized agitation tools rather than a basic brush kit. Old Town’s smaller homes often have dryers shoehorned into converted closets with short, angled runs that turn sharply behind original cabinetry. These runs can be crushed or kinked in ways a visual check from the laundry room won’t reveal. Our process finds the actual problem before we quote, so you’re not paying for a cleaning when what you need is a repair or reroute. Call (361) 326-5060 for an estimate.
Damp, often with a musty film or salt crust on the metal surface, and packed with dense, matted lint rather than dry, flaky buildup. The marine layer keeps this section humid year-round, especially in uninsulated runs or those passing through exterior walls. This environment also accelerates corrosion of the duct walls and register connections. Our rotary brush system with negative-air extraction removes the packed lint, and we inspect for corrosion damage that could require section replacement. Call (361) 326-5060 for an exact assessment of your system.
Ready to get your dryer vent sorted? Call Hollis Air Duct Cleaning at (361) 326-5060 for a free, written estimate. We’ll inspect your system, show you what we find, and give you one flat price before any work begins. Every job is backed by our 365-Day Done Right Promise, and our technicians arrive uniformed, background-checked, and on time.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Seal Beach since 2004.