Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Hemet
Dryer vent cleaning in Hemet typically runs $149 – $289 for a standard single-family home, with most jobs completed in 60 – 90 minutes. If your dryer takes two cycles to finish a load, or if your home sits in one of Hemet’s 55+ communities off Florida Avenue or Stetson Avenue, the vent itself is likely the problem, not the appliance. Call Hollis Air Duct Cleaning at (361) 326-5060 for a free estimate, and we’ll show you exactly what’s inside your vent run before we quote a price. We also offer Air Duct Cleaning in Hemet if your home’s full duct system needs attention.
We’ve worked the length of the San Jacinto Valley, from the retirement tracts near Simpson Park to the mobile home parks along State Street, and the pattern is consistent: Hemet’s extreme attic heat bakes lint into hard, flammable deposits inside long dryer runs, while months of vacancy let rodents and paper wasps block the exterior cap. Our crews dispatch from the Inland Empire office and serve Hemet locally, arriving inside the quoted window with background-checked, uniformed technicians and a written price before any work starts. That’s The Garrison Standard, and it’s how we’ve operated since 2004.
Why Hollis Air Duct Cleaning Is Hemet’s Preferred Dryer Vent Cleaning Company
Hollis Air Duct Cleaning has built its reputation in Hemet on one thing: doing what we said we’d do, at the price we wrote down, and standing behind it for a full year. Our Dryer Vent Cleaning in Hemet work comes with the 365-Day Done Right Promise – if the repair or cleaning fails within a year, we return and make it right at no charge, including a free second visit. No negotiation, no runaround.
Our technicians arrive uniformed and background-checked, and they carry professional-grade equipment from Rotobrush and Nikro – rotary brush systems and negative-air machines that commercial crews use, not hardware-store attachments. We price every job in writing before touching anything, and that number doesn’t move at the door. Phones are answered by a live person 24 hours a day, 7 days a week, so you’re never stuck in a callback queue when you need to schedule or ask a follow-up question.
We know Hemet’s housing stock: the post-1970s tract homes with fiberboard ductwork, the 55+ parks with low-pitch roofs and attic runs that hit 140°F in July, the snowbird places that sit empty half the year. That local knowledge means we diagnose faster and fix it right the first time, not after three callbacks.
Dryer Vent Repair in Hemet
Dryer Vent Repair in Hemet usually addresses the exhaust pathway itself, not the appliance, because this city’s combination of extreme attic heat and long, low-pitch dryer runs destroys vent infrastructure faster than the dryers. A typical repair in Hemet runs $189 – $379 depending on whether we’re replacing a crushed flex run, rerouting through a shorter path, or installing a new vent cap after rodent or wasp damage. Most Hemet homeowners need repair rather than simple cleaning when the dryer still overheats or shuts off mid-cycle after a basic lint clearing.
Crushed Flex Run Replacement
Builders in Hemet’s post-1970s tracts often left a long foil flex duct crammed into tight closet spaces behind the dryer. Over years of heat cycling, that flex gets compressed against the wall, and lint bakes onto the collapsed section until airflow drops to nearly nothing. We replace it with a smooth, properly routed metal run that doesn’t choke the exhaust.
Vent Cap and Exterior Repair
Hemet’s snowbird homes sit vacant for months, and paper wasps, mud daubers, and rodents treat the outside vent cap like a ready-made nest site. We remove the blockage, repair or replace the cap with a proper rodent-resistant model, and verify full airflow before we leave. The Garrison Code requires it.
Dryer Vent Cleaning Company in Hemet
Dryer Vent Cleaning Company work in Hemet means more than pulling lint from the trap; it means clearing the entire exhaust pathway from the dryer drum to the exterior cap, including the sections hidden in attic runs that bake at 140°F for eight months a year. A standard cleaning for a Hemet single-family home or mobile home runs $149 – $289, with 55+ community jobs often at the lower end due to compact layout, though long attic runs can push toward the higher range. Most Hemet homeowners should schedule cleaning every 12 – 18 months, or immediately upon returning to a seasonally occupied home.
Agitation Cleaning Under HEPA Filtration
Our Dryer Vent Cleaning team uses Rotobrush rotary brush systems and Nikro negative-air equipment to mechanically agitate lint deposits loose, then extract them under contained airflow. In Hemet’s heat-baked vents, that mechanical action matters: lint here isn’t fluffy, it’s cured into a hard mat that compressed-air wands alone won’t touch.
Camera Inspection and Airflow Verification
After cleaning, we run a camera through the full pathway and measure exhaust airflow at the cap. You see the before and after. No guesswork, no “trust us, it’s clean.” The numbers and the footage are yours.
Trusted Brands We Service in Hemet
Hollis technicians carry parts and equipment from Rotobrush, Aprilaire, Abatement Technologies, and Guardsman – brands that commercial HVAC crews specify, not retail-grade alternatives. For Hemet homeowners, that means faster turnaround on repairs: we don’t order a vent cap or transition piece and make you wait a week. We stock the common failure items for the dryers and vent configurations we see in San Jacinto Valley homes, from the mobile home parks off State Street to the retirement tracts near Simpson Park. When your dryer is out of commission, that parts availability matters. And every installation or replacement is covered under the same 365-Day Done Right Promise as our cleaning work.
Common Dryer Vent Cleaning Problems We See in Hemet Homes
- The “vent is fine” assumption in snowbird homes. The dryer ran fine last season, so nobody checks – but six months of vacancy let paper wasps or rodents completely block the exterior cap. The first load back overheats the unit and trips the thermal fuse, and the homeowner blames the dryer.
- Flex duct crushed behind the dryer in tract construction. Hemet’s post-1970s builders often left a long, kinked foil run in a tight closet. Attic heat bakes lint onto the walls of that crushed section until airflow drops to a trickle. The dryer works twice as hard and lasts half as long.
- Fogging “sanitiser” upsells that ignore the actual problem. Spraying a deodorizer into a clogged vent does nothing for the fire hazard, and it does nothing for the 140°F attic section where lint has cured into hard, flammable deposits. We don’t sell fogging treatments because they don’t fix what matters.
- Thermal cycling damage to long attic runs. Hemet’s 100°F summer days and near-freezing winter nights expand and contract metal duct seams. Gaps open, lint escapes into the attic, and the vent loses pressure. We find this constantly in the low-pitch roofs of 55+ communities.
Pricing for Dryer Vent Cleaning in Hemet, CA
| Service | Typical Range in Hemet |
|---|---|
| Dryer vent cleaning (standard single-family or mobile home) | $149 – $289 |
| Dryer vent repair (flex replacement, cap repair, minor rerouting) | $189 – $379 |
| Vent rerouting (significant path change, new wall penetration) | $340 – $550 |
| Bird guard or rodent-resistant vent cap installation | $85 – $165 |
| Camera inspection with written report | $75 – $125 (often waived with cleaning) |
What moves a Hemet job toward the higher end: long attic runs common in 55+ tracts, multiple bends or elbows, rodent or insect damage requiring cap replacement, or lint baked into hard deposits that need extended agitation time. What keeps it lower: straight, short runs, ground-floor laundry rooms, and regular maintenance every 12 – 18 months. We give you one flat price per system, agreed in writing, before any work starts. No per-vent pricing, no add-ons at the door. Call (361) 326-5060 for your free estimate.
We Also Serve Cities Near Hemet
Our crews cover the full San Jacinto Valley and surrounding communities, including Hemet, San Jacinto, Homeland, Nuevo, and Menifee. Scheduling and dispatch run from our Inland Empire office, with local technicians assigned to each area for faster response and familiarity with regional housing stock.
Serving Hemet, CA - Our Local Coverage Area
We’re based in the Hemet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Hemet
Yes. In Hemet’s 55+ communities and snowbird tracts, we find exterior vent caps blocked by paper wasp nests, mud dauber tubes, or rodent debris in roughly one of every three homes that sat vacant for three months or more. The dryer may start, but restricted exhaust will overheat the unit and trip the thermal fuse, or worse. We inspect the cap and run a camera through the pathway before you load the first towel. Call (361) 326-5060 to schedule before your return.
Yes, significantly. Hemet’s attic runs regularly exceed 140°F in summer, which bakes lint onto duct walls and transforms it from a fluffy deposit into a hard, adhered mat. Coastal cities with moderate temperatures see slower buildup and softer deposits that clean out easier. Hemet’s heat also degrades flexible duct faster, creating cracks where lint escapes into the attic and seams that separate under thermal cycling. The climate here doesn’t just accelerate the problem; it changes the nature of it.
No. A fogging treatment sprays deodorizer or antimicrobial into the duct, but it does not remove lint, it does not restore airflow, and it does nothing for the fire hazard in a heat-cured deposit. In Hemet’s 140°F attic runs, any moisture from fogging evaporates before it contacts the surface anyway. We don’t sell fogging treatments because they don’t fix what matters: the physical blockage and the flammable material in the pathway. Mechanical agitation and extraction are the only methods we use, and we show you the before-and-after footage to prove it.
Repair is needed when the vent infrastructure itself is damaged: crushed flex duct behind the unit, separated seams in the attic run, a missing or broken vent cap, or a pathway that’s too long with too many bends for the dryer to overcome. Cleaning is sufficient when the pathway is intact but clogged with lint. Our camera inspection shows the difference before you commit to either. If the dryer still overheats after a thorough cleaning, or if the flex run crumbles when we touch it, we quote repair separately and write the price down before starting. Call (361) 326-5060 and we’ll diagnose it properly.
Dryer vent fires start when lint, which is highly flammable, ignites from the dryer’s normal operating heat – typically 150 – 200°F at the heating element. The fire spreads when restricted airflow lets heat build up in the duct. Hemet’s agricultural dust and fine particulates from the San Jacinto Valley add to the fuel load, and the extreme attic heat pre-dries any lint deposits, lowering their ignition threshold. A clean vent with verified airflow won’t accumulate that heat. That’s why we measure exhaust velocity at the cap and give you the number.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Hemet and the San Jacinto Valley since 2004.




Before
After
Before
After
Before
After