Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Groveland
Dryer vent cleaning in Groveland typically runs $150 – $275 for a standard single-family home, and most jobs are completed in under two hours with the dryer back in service the same day. We’re the Dryer Vent Cleaning crew that serves Groveland from our South Florida dispatch office, with technicians who know the difference between a crushed builder-grade run in a new subdivision off Cherry Lake Road and an undersized original metal vent in a downtown home from the 1970s. Call (361) 326-5060 for a written estimate before any work starts.
Why Hollis Air Duct Cleaning Is Groveland’s Preferred Dryer Vent Cleaning Company
We’ve been in business since 2004 as part of the Garrison Partners family, and our Groveland customers come back because we price in writing and stand behind the work. Our 365-Day Done Right Promise means if the vent fails within a year, we return and make it right at no charge, including a free second visit. Background-checked, uniformed technicians arrive inside the quoted window, and phones are answered by a live person 24 hours a day, 7 days a week. We know Groveland’s housing stock: the master-planned communities near Lake Emma Road where builder-grade flex duct gets crushed behind cabinets, and the older homes around Broad Street where decades of lint hide in original rigid runs that were never designed for today’s high-CFM dryers.
Dryer Vent Cleaning Company in Groveland
Dryer Vent Cleaning Company work in Groveland means more than pulling lint from a trap - we also offer Air Duct Cleaning in Groveland for your full HVAC system. We clean the full vent run from the back of your dryer to the exterior termination, using rotary brush systems from Rotobrush and negative-air methods with Nikro equipment to dislodge packed lint and construction debris. In Groveland’s newer subdivisions, we regularly find the real problem isn’t lint buildup at all – it’s a crushed or disconnected flex run behind the dryer, installed fast during construction and never properly seated. A typical cleaning in Groveland runs $150 – $225; if we find a crushed section that needs rerouting or a disconnected run that requires reconnection and sealing, that repair work usually adds $75 – $150 to the total. We write the full price before touching anything.
When to Schedule Cleaning
Your dryer taking two cycles to finish a load is the clearest signal. So is a burning smell, excess heat in the laundry room, or lint collecting behind the dryer instead of in the trap. In Groveland’s humid climate, damp lint clumps and compacts faster than in drier regions, so we recommend earlier intervention when these symptoms appear.
What the Process Covers
We disconnect the dryer, inspect the full run with a camera when needed, rotary-brush the duct to the termination, and measure airflow before and after. You’ll see the before-and-after photos. If the exterior cap is damaged or missing, we stock replacements and can install a bird guard to keep nesting material out.
Dryer Vent Inspection in Groveland
Dryer Vent Inspection in Groveland is where we find the problems that cleaning alone won’t fix. We run a camera through the full vent run to document crushed sections, disconnections, improper slope, or terminations that terminate too close to the ground or under an eave where humidity pools. A standalone inspection in Groveland costs $89 – $129; if you proceed with cleaning or repairs the same visit, we apply that inspection fee toward the work. In Groveland’s newer homes, the inspection often reveals the builder’s flex run was kinked 180 degrees against the cabinet and packed with drywall dust – the homeowner thought their new dryer was defective. In older downtown homes, we find original 4-inch metal runs that were fine for 1980s dryers but create backpressure with modern units, forcing the blower motor to overheat and shut down on long cycles.
Camera Documentation
You see what we see. The camera feed shows every connection, every sag, every point where lint has packed into a restriction. We save the footage and review it with you before quoting any repair work. No surprises, no pressure – just the facts of what’s in your wall.
Code and Safety Check
We verify the vent material is rated for the application (foil flex is a fire hazard and against code), confirm the termination has proper backdraft prevention, and check that the run length and elbow count meet IRC standards. In Groveland’s flood-prone areas, we also look for water intrusion that leaves damp lint clumped against the termination.
Trusted Brands We Service in Groveland
We stock parts from Aprilaire, Abatement Technologies, and Guardsman for fast turnaround on cap replacements, bird guards, and transition fittings. Our Rotobrush rotary systems and Nikro negative-air machines are the same tools commercial crews use, not hardware-store gear. For Groveland homeowners, that means we don’t order parts and make you wait – we carry what breaks and install it during the same visit. If your vent termination was damaged in last summer’s storms or the flapper has corroded shut from humidity exposure, we measure, cut, and fit the replacement on site.
Common Dryer Vent Cleaning Problems We See in Groveland Homes
- Crushed builder-grade flex runs in new subdivisions. Homes near Max Hooks Road and the Cherry Lake area were built fast, and the flexible vent behind the dryer was often jammed against the cabinet or never fully connected to the exterior termination. The dryer runs twice as long, the electric bill climbs, and the homeowner blames the appliance.
- Undersized original metal vents in older downtown homes. The rigid or semi-rigid runs installed in Groveland’s pre-2000 housing stock weren’t sized for modern dryers pushing 200+ CFM. Lint accumulates in the reduced airflow, and the blower motor overheats and cycles off on thermal limit.
- Humid air and damp lint compaction. Central Florida’s afternoon thunderstorms and Groveland’s high water table pull moisture into disconnected or leaky vent runs. Lint that would blow clear in a dry climate instead clumps, hardens, and blocks the termination cap – especially after the rainy season.
- Missing or damaged exterior caps from storm exposure. The wind-driven rain that hits Groveland during summer thunderstorms cracks plastic flappers and blows off louvered caps. Birds and squirrels move into the open termination, and the first sign is often a dryer that won’t push air at all.
Pricing for Dryer Vent Cleaning in Groveland, FL
Standard dryer vent cleaning in Groveland runs $150 – $225 for a single-story home with a straight run under 25 feet. Two-story homes or runs with multiple elbows that require longer rotary brushing typically fall in the $200 – $275 range. Vent rerouting to replace a crushed flex section with proper rigid duct adds $75 – $150 depending on material length and access. Bird guard installation is $45 – $85. Cap replacement runs $35 – $75. We write every price before work starts, and that number does not move at the door. The estimate is free. Call (361) 326-5060.
We Also Serve Cities Near Groveland
Our crews cover Groveland and the surrounding South Lake County area including Mascotte, Clermont, Minneola, and Oakland. Same written pricing, same 365-Day Done Right Promise, same background-checked technicians at every stop.
Serving Groveland, FL - Our Local Coverage Area
We’re based in the Groveland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Groveland
Probably not lint buildup; more likely the builder’s flex run was crushed or left disconnected during construction. We see this constantly in Groveland’s newer subdivisions. The dryer works fine, but the vent can’t move air. A camera inspection finds it fast, and reconnection or rerouting fixes it the same day. Call (361) 326-5060 for a free estimate.
Humid air is entering through a disconnected joint, damaged cap, or missing backdraft damper. Groveland’s afternoon thunderstorms and high water table pull moisture into the duct, and damp lint grows microbial matter that smells when the dryer heats it. We find the entry point during inspection, seal it, and clean the affected section. Call (361) 326-5060 to schedule.
We camera the full run from dryer to termination, check for proper material and slope, verify termination location and condition, measure airflow, and document any code violations like foil flex or excessive run length. You get the footage and a written report. The inspection fee applies toward same-visit cleaning or repairs. Call (361) 326-5060.
Original rigid metal is actually the safest material; the issue is usually diameter and layout, not the metal itself. Many downtown Groveland homes have 4-inch runs that create backpressure with modern dryers, or terminations that no longer seal properly. We inspect, measure airflow, and tell you whether cleaning solves it or the run needs upsizing. Call (361) 326-5060 for an exact answer on your system.
Every 12 – 18 months for typical use, or annually if you run multiple loads daily or have pets that shed into laundry. Groveland’s humidity accelerates lint compaction, so we lean toward the shorter interval here. Homes with properly installed rigid vent in good condition may stretch toward two years; homes with damaged caps or prior disconnections need annual checks until the system is proven sound. Call (361) 326-5060 to set a schedule.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Groveland as part of the Garrison Partners family since 2004.