Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Burbank
Dryer vent cleaning in Burbank typically costs $150 – $280 for a standard single-family home, and most jobs are completed in under two hours with the dryer back in service the same day. If you’re noticing longer dry cycles, a hot laundry room, or that musty lint smell creeping through your Magnolia Park or Rancho home, the vent run is probably choked with years of accumulation.
We serve Burbank from our Los Angeles dispatch office, and our crews know the local housing stock cold: the 1940s Lockheed tracts off Burbank Blvd, the hillside builds above Glenoaks, the converted gravity-furnace ranches with original galvanized ductwork still in the walls. That matters because a dryer vent in a 1952 tract home with a 28-foot horizontal run through an attic chase is a different job than a 1990s condo with a six-foot straight shot. Call (361) 326-5060 for a free estimate, or keep reading to see what we find in Burbank homes and what it costs to fix it right.
Why Hollis Air Duct Cleaning Is Burbank’s Preferred Dryer Vent Cleaning Company
We’ve been part of the Garrison Partners family since 2004, and our Dryer Vent Cleaning crews have worked enough Burbank jobs to know the patterns. In Magnolia Park, we regularly pull 28-foot galvanized runs packed with lint where the original 1940s installation had no cleanout. In the Rancho and Victory-area tracts, we find crushed flex elbows at wall collars that a homeowner’s shop-vac never reaches. That local knowledge means we show up with the right tools, not a guess.
Our technicians are background-checked, uniformed, and held to The Garrison Code: arrive inside the quoted window, price in writing before touching anything, finish by the book, leave the site clean. Every job carries our 365-Day Done Right Promise in writing. If the work fails within a year, we come back and make it right at no charge, including a free second visit. No negotiation, no runaround.
Phones are answered by a live person 24 hours a day, 7 days a week. You’ll talk to someone who can schedule you, not a callback queue that dumps you to voicemail. And the price we write down before work starts is the price you pay. It does not move at the door.
Dryer Vent Cleaning Service in Burbank
Dryer Vent Cleaning Service in Burbank means more than vacuuming lint from a trap. We inspect the full run from the dryer boot to the exterior hood, agitate and extract packed lint with professional-grade equipment, and repair or replace crushed sections, improper elbows, and failed terminations that turn your vent into a fire hazard.
Most Burbank homeowners need this service when dry cycles stretch past 50 minutes, when the laundry room heats up, or when they smell burning lint. In older Burbank homes, we also see warning signs that look like dryer problems but are actually vent problems: moisture buildup inside walls, peeling paint near the termination, or a dryer that “works fine” but never actually dries.
A standard Dryer Vent Cleaning Service in Burbank runs $150 – $220. If we find a crushed flex connector, a disconnected run in an attic chase, or a termination that needs rebuilding, repair work adds $60 – $120. We write it all down before we start.
Camera Inspection and Agitation Cleaning
We run a borescope camera through the full vent run so you see what we see: lint packed in horizontal sections, elbows clogged where the run changes direction, or a bird guard that’s actually trapping moisture. Then we use a Rotobrush rotary brush system with simultaneous negative-air extraction to break loose packed material and pull it out, not push it deeper.
Crushed Elbow and Connector Repair
The flex connector behind your dryer is the most failure-prone piece in the system. In Burbank’s older homes, we regularly find original connectors flattened against the wall or kinked where the dryer was pushed back too far. We replace these with proper semi-rigid aluminum connectors rated for the dryer’s exhaust temperature, not the vinyl or foil flex that most homeowners have inherited.
Dryer Vent Installation in Burbank
Dryer Vent Installation in Burbank becomes necessary when the original run is beyond cleaning, when a homeowner relocates the laundry room, or when we discover that a 1940s gravity-furnace conversion left an undersized termination that restricts modern dryer airflow. New installation also applies when a vent run has been illegally routed into an attic or crawlspace, a code violation we see in Burbank hillside additions from the 1970s.
A full Dryer Vent Installation in Burbank, including new rigid metal run, proper elbows, wall or roof termination, and exterior hood, typically runs $280 – $450. Complex jobs with long horizontal runs through attic chases, or rerouting through Burbank’s older stucco and lathe walls, can reach $500 – $650. We measure, photograph, and write the price before any cutting starts.
Code-Compliant Rerouting
Burbank’s older homes often have dryer vents that terminate in garages, crawlspaces, or attics, none of which meet current California building code. We reroute these runs to proper exterior terminations with adequate clearance from windows and HVAC intakes, using rigid aluminum pipe with sealed joints, not duct tape that cracks in our dry Santa Ana wind cycles.
Bird Guard and Termination Upgrades
Original wall caps and roof jacks across Burbank’s post-war tracts were sized for the appliances of the 1950s, not modern dryers pushing 200 CFM. We install code-compliant hooded terminations with integrated bird guards that stop nesting without blocking airflow, and we size them to your dryer’s actual exhaust rating.
Trusted Brands We Service in Burbank
Our equipment roster includes Rotobrush rotary brush systems for agitation cleaning, Nikro negative-air machines for extraction, and filtration and sealing products from Honeywell, Aprilaire, and Guardsman. We don’t show up with hardware-store shop-vacs and crossed fingers. For Burbank homeowners, this means we can source replacement parts and proper terminations without waiting on a warehouse in another state. A Guardsman bird guard that fits your 4-inch rigid run, an Aprilaire filtration upgrade for the return duct we find sharing your vent chase, a Rotobrush head sized for your 28-foot galvanized trunk: we stock what Burbank’s housing stock actually needs.
Common Dryer Vent Cleaning Problems We See in Burbank Homes
- Original galvanized runs with no cleanouts. Most 1940s – 1950s Burbank tracts were built with round galvanized dryer vents that have no mid-run access point. Lint packs in the long horizontal sections between the dryer and the exterior wall, and a vacuum from either end never reaches the middle. Our camera inspection finds the blockage, and our rotary brush system breaks it loose.
- Crushed flex connectors at the wall collar. Homeowners push dryers back against the wall, kinking or flattening the flex elbow. In Burbank’s older homes with shallow laundry closets, this happens almost by default. The restricted airflow overheats the dryer and packs lint at the crimp point.
- Shared wall chases between dryer vents and HVAC ducts. When central air was retrofitted into Burbank’s post-war tracts, contractors often ran new ductwork through the same wall cavities as existing dryer vents. Cracked mastic from our dry climate lets lint migrate into supply and return ducts. Cleaning the vent alone misses the cross-contamination.
- Undersized terminations from gravity-furnace conversions. Original wall caps and roof jacks across Burbank were never designed for modern dryer airflow. The restricted opening causes back-pressure, which slows drying and accelerates lint buildup. We replace these with properly sized hooded terminations.
Pricing for Dryer Vent Cleaning in Burbank, CA
Here’s what Dryer Vent Cleaning costs in Burbank’s market, based on the jobs we’ve actually completed:
| Service | Typical Range |
|---|---|
| Standard dryer vent cleaning (single-family, accessible run) | $150 – $220 |
| Deep cleaning with camera inspection and agitation | $200 – $280 |
| Crushed flex connector replacement | $60 – $120 |
| Partial rerouting or elbow rebuild | $120 – $200 |
| Full dryer vent installation (new run, termination, hood) | $280 – $450 |
| Complex installation (long attic chase, stucco penetration) | $500 – $650 |
What moves the price: length of the run, number of elbows, accessibility (crawlspace, attic, steep roof), and whether we find code violations that need correction. We inspect first, photograph what we find, and write the full price before any work begins. No per-vent pricing, no teaser coupons that balloon at the door. Call (361) 326-5060 for a free estimate; we’ll give you a real number you can plan around.
We Also Serve Cities Near Burbank
Our crews work throughout the San Fernando Valley and nearby communities. We regularly schedule Dryer Vent Cleaning in Burbank alongside jobs in Glendale, West Hollywood, Altadena, and Beverly Hills. Same equipment, same written pricing, same 365-Day Done Right Promise at every stop.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Burbank
Three local factors accelerate lint buildup in Burbank: the long horizontal galvanized runs in 1940s – 1950s tracts with no cleanouts, the dry Santa Ana winds that pull dust and lint through every gap in the building envelope, and original terminations that were sized for 1950s dryers and can’t handle modern airflow. Your old home may have had a short, straight vent run; your Burbank ranch probably doesn’t. Call (361) 326-5060 and we’ll inspect the full run to show you exactly where the bottleneck is.
Most Burbank homes need dryer vent cleaning every 12 – 18 months. Homes with long attic runs, multiple elbows, or original galvanized pipe should schedule annually. If you dry multiple loads daily, have pets that shed, or notice dry cycles creeping longer, inspect sooner. We offer free annual reminder calls for Burbank customers on our maintenance schedule.
Yes, and we often recommend it in Burbank. Because so many post-war tracts have shared wall chases between dryer vents and HVAC ducts, lint and dust migrate between systems. Cleaning both on one visit lets us seal the chase properly with mastic and ensure nothing recirculates. Combined service typically runs $350 – $550 for a standard Burbank home, written in full before we start.
A crushed connector is the most common restriction we find, and it creates a pressure point where lint packs tight. The dryer works harder, runs hotter, and dries slower. Left uncorrected, it strains the dryer’s heating element and creates a fire hazard at the crimp. We replace crushed connectors with semi-rigid aluminum elbows that hold their shape when the dryer is pushed back.
Sometimes. If the original run is galvanized pipe with interior rust scaling, if it’s been illegally routed into an attic or crawlspace, or if the termination is an undersized gravity-furnace cap that can’t move modern dryer airflow, cleaning won’t fix the underlying problem. We camera-inspect every Burbank job and tell you straight whether cleaning is sufficient or if installation is the safer long-term fix. Either way, the price is written down before we touch anything.
Written by Roy Castellanos, Owner at Hollis Air Duct Cleaning, serving Burbank since 2004 as part of the Garrison Partners family.